Jump to content
SAU Community

Changing Water Pump On R32 Gts-T?

Gemini

By Gemini,
in General Maintenance

 Share

Recommended Posts

Gemini Contributor

Gemini

Posted
Posted

Hey guys, I need to change the water pump in my R32 GTS-T but it looks like there is a shit load of stuff I need to take off. Is there a guide I can follow? Ive removed the radiator, fan, and thermostat as im replacing it all with new stuff but the water pump has got me a little stumpped.

Link to comment
https://www.sau.com.au/forums/topic/355315-changing-water-pump-on-r32-gts-t/
Share on other sites
R TUNE Mentor

R TUNE

Posted
Posted

Yes thier is a how to, look in the FAQ sticky at the top of this section, should be under timing belt, You do need to remove the timing belt in order to change the watetr pump, if you havnt changed the belt in say the last 10,000km you should change this is as well. gates sell a timing belt kit, which has a timing belt, a tensioner and idel puly for about $400 (good valuale) as you should also change the pully and tensioner when you change the belt.

While you have it off consider throwing some adj cam gears in (if you wont) as you will have to repleace the belt agan when you/ if you decide to change the cam gears.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PLYNX
      Is this saveable r32 gtr seat

      By PLYNX · Posted

      How much is it to re-uploster?  Well that's a "how longs a piece of string?" question !  And I answer thusly: "twice half its length! " . . . . . .  Seriously you'll have to chase multiple quotes for that one from different uphlostrerereres !  Ask around, in your area and on the forums, chase reviews and most of all see the finished product in person cause photoshop is a wonderful thing !
    • DraftySquash
      RB25DET Engine Oil Dipstick Length

      By DraftySquash · Posted

      Hey everyone!!  I've noticed that whenever I do my oil changes, after putting 4L in, the oil level sits at the top mark in the dipstick. This is after letting the old oil drain for a very long time too! I've checked the oil level daily for the past few mornings. It happens every time and it's confusing because all the threads say that it should take about 4.7L (With some just adding the full 5L) My next thought is to figure out if the dipstick I have is correct so could someone please tell me the length of the RB25DET engine oil dipstick?  I've checked images of some of the genuine dipsticks, but none of them have the length in it. https://justjap.com/products/genuine-nissan-engine-oil-level-dipstick-fits-nissan-r34-skyline-c34-stagea-c35-laurel-y34-cedric-gloria-rb25de-t-neo?currency=AUD&srsltid=AfmBOortQXofgmiHVRKuIaiKuygL4k0Ewp68c3isGZk0vvKOJ7Yqf3iB However.... the engraving on the genuine ones say 05002 while mine says AA000. This makes me believe that maybe I have a wrong dipstick? I just want to confirm before I buy a new one. The car is a fresh import from Japan so I don't have details of the previous owner to ask him. Thanks in advance 🙏🏾 
    • RB2533
      UniClutch

      By RB2533 · Posted

      Sport. I didn’t rebleed it cause I just removed the slave and left connected.    I will change line and slave and see how it goes.  
    • Butters
      UniClutch

      By Butters · Posted

      Oh and how is the rattle when foot is on the clutch ?
    • Butters
      UniClutch

      By Butters · Posted

      Did you get the sport or track ? From what the documentation says the uniclutch has a small amount of movement to disengage.  So your story of tricky pedal setup seems common.    Hopefully you got it bled up too, as the bite point moving around is usually either plates wearing in or air in the line.     
×
×
  • Create New...