Jump to content
SAU Community

Recommended Posts

Hey all

So today whilst driving (with my daughter in the car) at speeds of a MASSIVE 40kph I got pulled over (a common occurrence) after the old pop of the bonnet , click of the camera I now have a EPA referral :-( . He says my exhaust is too loud which I wont argue till I have facts , my front mount needs to be emissions tested and my pod filter which is under a enclosed aluminum housing (his argument is the bottom is not enclosed . Has any one had to have a EPA test for any of these 3 things ? My problem is I don't have any stock parts to change over and I imagine the wouldn't be cheap . I'm going to see what my options are regarding the dealer I bought it from because it "passed" a blue slip fitted with these things , the cop said I can write to the EPA and have them hunt down the dealer ?

Link to comment
https://www.sau.com.au/forums/topic/355437-cops-got-me/
Share on other sites

bad luck there,we are all driving our liners with a fair amount of mods.So far in nearly 10 years of having a 33 i have never had pop the bonnet please,i guess being an old girl helps.I hope you get it sorted asap.Genelle. :cheers:

Link to comment
https://www.sau.com.au/forums/topic/355437-cops-got-me/#findComment-5690603
Share on other sites

theres a couple of threads relating to people having these problems...its a major pain in the ass..i had a similar thing happen to me...you dont want to go for an emmisions test coz it is pretty hard to pass...you will not pass with a stock exhaust..

.best option (which i ended up having to do in the end) is just just buy/ borrow or steal standard side mount, airbox and exhaust..swap em over, go to the inspection station get it cleared and it will be sweet, its a lot of mucking around considering 99% of people will just swap it back anyway

good luck

Link to comment
https://www.sau.com.au/forums/topic/355437-cops-got-me/#findComment-5690645
Share on other sites

i got EPA for noise, your car will NEED to be at or under 90 DB at 4,700 RPM. i went to the bloke at granville, he was a knob and failed me first time due the the silencer in my cannon not being fully welded and "part" of the exhaust. i came in at 90 db.

Metal flange piece and steel wool stuffed behind the cat. ive still got it if you need to borrow pm me it might fit.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/355437-cops-got-me/#findComment-5691982
Share on other sites

i got EPA for noise, your car will NEED to be at or under 90 DB at 4,700 RPM. i went to the bloke at granville, he was a knob and failed me first time due the the silencer in my cannon not being fully welded and "part" of the exhaust. i came in at 90 db.

Metal flange piece and steel wool stuffed behind the cat. ive still got it if you need to borrow pm me it might fit.

Mate thanks alot :) if it gets that far il get intouch hopefully it doesn't

Link to comment
https://www.sau.com.au/forums/topic/355437-cops-got-me/#findComment-5692012
Share on other sites

True, at least i know what to do now if i do get done again :)

At the time i got done, i had little money because of job issues and the missus had to help me out to buy all the stock parts, with 2 weeks to get all parts, installed and go for inspection....... I was really up sh*t creek. Makes me sick thinking about it actually.

Link to comment
https://www.sau.com.au/forums/topic/355437-cops-got-me/#findComment-5692561
Share on other sites

Tuff break ive had it happened to me a few times in the past and its getting ever more hard to get these cars past without going through the headaches

of finding the standard parts to go back to :/ luckily for me no emissions.i dont think i would of past with a power fc been told once tuned your car will

produce higher amounts of pollution resulting in failed inspection?

Link to comment
https://www.sau.com.au/forums/topic/355437-cops-got-me/#findComment-5702785
Share on other sites

i have the following if you need it.

Stock airbox + snorkel.

Stock dump pipe (no stock cat back sadly).

Stock Cat.

Stock SMIC with all hoses / piping needed to fit it.

Can also help fit it all if your not familiar with that kind of stuff.

PM me anytime :)

Link to comment
https://www.sau.com.au/forums/topic/355437-cops-got-me/#findComment-5708880
Share on other sites

I have a question, where were you driving when you got defected? I must be out of the loop but I've owned more than 10 skylines in the last 10 years and never been defected once. the closest I came was getting pulled over by highway patrol in a silvia I had just bought. it was heavily modifed, it started life as a CA non turbo auto, but was no SR20, manual, turbo, with trust turbo, stainless mani, nismo 2way LSD, twin plate clutch, 5 stud conversion, full uras kit, coil-overs etc etc. lots of mods. he said mate either get it engineered or take it off the road and make it a race car. he said "my advice is do the second option as it'll never pass rego". he let me off though with just that advice as I had only recently bought it.

Link to comment
https://www.sau.com.au/forums/topic/355437-cops-got-me/#findComment-5709773
Share on other sites

i have the following if you need it.

Stock airbox + snorkel.

Stock dump pipe (no stock cat back sadly).

Stock Cat.

Stock SMIC with all hoses / piping needed to fit it.

Mate you are an absolute legend thanks il get the date of my inspection and msg you thanks again

Can also help fit it all if your not familiar with that kind of stuff.

PM me anytime :)

Link to comment
https://www.sau.com.au/forums/topic/355437-cops-got-me/#findComment-5712285
Share on other sites

Mate you are an absolute legend thanks il get the date of my inspection and msg you thanks again

No worries.

Just throw us a PM on here or a txt on 0403 273 338.

i live on the central coast but work in north ryde so weekend is easier but can work something out :)

Link to comment
https://www.sau.com.au/forums/topic/355437-cops-got-me/#findComment-5712676
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • So was there a solution to this problem? I’m having this issue now. 
    • not expensive, just irreplaceable if you don't go sub 60 at wakie in that thing people will start talking
    • I haven't replaced that, but I have had the doors apart on the r32 a couple of times The door skin will be held on by a combination of clips and bolts, just take it slowly and make sure all the sneaky hidden bolts are out Once the skin is off you should be able to pop that piece off pretty easily, looks like there are only 2 bolts holding it on
×
×
  • Create New...