Rb25Det Engine Loom And Ecu Options

[femno]

Yeah aka series 1.5.

Is there spark?

Are the injectors pulsing? If you take the CAS out and spin it with the IGN on you should be able to hear them.

Id be concerned about the large white plug. You need a pinout of it to see what runs through it. Might not run without one single wire connected.

If you PM BH_SLO32 he may be able to tell you what important stuff is in that plug. He knows heaps about RB wiring.

Its good you have power everywhere, good start.

[MODNIZD]

I just ran Diags on it. Code 11. CAS. Dammm. Ill pull it out and try it Femno. Otherwise I need to find a really nice bloke who can lend me one to see if that is the problem. Might have been damaged with a short when the guy cut the ECU out.

Anyways I'm getting closer!

[MODNIZD]

So have tried 3 CAS's now and still no go. Have no Spark. ECU is stil reporting CAS Error, have reset codes too.

If I reset the codes, get 55 again, as soon as I crank it over again then check it again I get CAS Error again.

What else should I look at?

[wolverine]

Probably useless information but I had a CAS error showing up when one or more of the coil packs had issues.

[RRob]

Is there a thin grey wire in the connector at the air box? If so that would be the injector power supply your looking for.....