Jump to content
SAU Community

Recommended Posts

What's up guys, got some stuff to sell, located in S.E. Melbourne

Feel free to make reasonable offers

1. 4 Steelies with good tyres- $100

Specs of tyres are 205/60R15 91H Bridgestone Playz PZ-1.

Steelies themselves are in bodgy condition, need a good clean + coat of paint, and bobs your uncle.

Good to pass rwc or go for that poor man steelies on car look.

Not that good with photos but good (85%+) amount of tread left, can take more photos for nice people.

176581_2011021425_tmb1.jpg

176581_2011021411_tmb1.jpg

176581_2011021436_tmb1.jpg

2. 18' Vertec Manray Rims- $250

18 inch Vertec VR5 Manaray Sport Rims warpped in Bridgestone Potenza RE040 225/45R18 91W tyres, with not so much tread left.

rims themselves are in crappy condition, hence the cheapish price, somehow, the previous owner got gutter rash on all 4 rims the along the length of the rims (herp derp. Clear coat is peeling to, so, to state the obvious, suits restoration.

Needs a good clean, unless you like bugs+spiders sharing your car with you. No buckles

176582_2011021443_tmb1.jpg

176582_2011021403_tmb1.jpg

3. R34 gt wing- $60

alpine white, got a few scratches here and there, best to come check it out, some will buff out some need touching up

buy it and put it on your camry or something

166809_2010102223_tmb1.jpg

4. Genuine r34 sedan URAS kit $600

got a semi brand new genuine uras d1 kit for r34 sedans for sale

comes with front bar, rear bar and 2 side skirts.

front bar and rear bar are unpainted

side skirts have been painted silver and slightly shaved at the rear doors so they can open,nothing a bit of fibreglass bog wouldnt be able to sharpen up.

whats the retail on one of those? you may ask, well, more than you can afford pal. but seriously; brought it off some guy here for 600 but never put on car, and now car is sold so no need for it; just trying to get back what I brought it for.

photos are in the guys link (if you are this guy and don't want me to use your photos/ thread, just pm me and ill remove it)

Link to photos

5. BNR32 Cuscos $900 ono

Not sure on the model (my in-laws), but in excellent condiition; no leaks/ noises.

Unfortunately, they are extremely stiff, "like a bbc gently loving you" (I made that up), but he said they were extremely stiff and uncomfortable for on road usage but would be good for a track car.

Trial fitting welcome.

11.jpg

12.jpg

6. r34 gt rad fan $20

Apparently some of the fins are bent (not 100% sure), was in a minor dingle.

Photo0039.jpg

7. Skyline lettering $10

IMG_1057.jpg

8. "S" skyline bade $10

Slightly scratched, needs a clean

IMG_1059.jpg

8. Nissan badge $10

IMG_1060.jpg

9. R34 Gt boot lining thing $15 Good condition

IMG_1062.jpg

  • 2 weeks later...
  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...

BUMP

Two of the steelies sold, 35 bucks for the other two

also, some free r34 guards

Photo0045.jpg

driver side is fine (slight bend)

passenger side bendy, good for a temp guards

  • 4 weeks later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yes, an R34 workshop manual is downloadable. The R32 GTR one which is findable everywhere would also do the job, seeing as almost all those bolts are same-same enough.
    • It can be hit and miss, I can fit 15mm ones on the v37, but only because the wheel happens to have voids on the mounting face that allow it to fit. Have you checked the mounting face of the wheel and know it will not sit flush? Rather than cut (or try and find shorter) studs, just buy a thicker spacer (unless clearance from the wheel to the guard does not allow it), then everything is reversible in future
    • Obviously you need shorter studs (don't just cut the original studs off!) and really short nuts that will fit in the spacer. Thus exposing the problems with thinner bolt on spacers.
    • https://www.carsales.com.au/cars/details/2002-holden-commodore-ss-vx-ii-auto/SSE-AD-18219062/?gts=SSE-AD-18219062&gtssaleid=SSE-AD-18219062&pageSource=details
    • does anyone know tie rod torque setting and anti roll bar for r34? Is there a workshop which shows various components torque setting?
×
×
  • Create New...