Jump to content
SAU Community

Recommended Posts

Why would taking a sticker off the car fool cops or anyone???????????

1. the cops would just run your car's detail's

2. the cop's can just pop your bonnet and look inside, plus you realise you cant hide your side/front mount intercooler

3. If you have an accident you won't be covered by insurance, as you aren't meant to be driving it to start with

Edited by ecliptor
  • Like 1

When I bought my car, I noticed that the t from the "Gts25t" sticker above the driver side tail light was missing.

OP owned my car b4? :ph34r:

Also IBTL...

Edited by Mayuri Krab

I took the turbo badge off my GTR and then the clock stopped working.

Id leave the badges on if you want to know what the time is.

You guys are so mean, dont listen to em mate

Truth is there is actually a sensor in the car that knows if the person driving has a full license, so even if you remove the stickers it wont work until you have a full license..Sorry buddy but your out of luck..

gtr badges on falcons is ultimate stealth mode.

maybe you could put a blanket over the engine so if the cop pops the hood all he will see is your nan's pro double weave

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • It's sodium citrate, I misspoke earlier. It's a citrate buffer solution. And yes, depending on how thin the metal in the tank is this may or may not be a wise decision but if it's just mild rust it should clean off and it should be fine. 
    • Price seems pretty good to me. Also seems a hell of a lot cheaper then buying another vehicle that only ever gets used for towing.  I'm a long way from you mate, I'm a couple of hours out of Brizzy. 
    • New [400]Z, they're available in manual and you don't have to worry about parts scarcity. 
    • Just planning to have the wiring neat and hide as much as possible.
    • The sodium acetate, mixed with citric acid, doesn't actually buffer each other. Interestingly though, if you used Sodium Acetate, and acetic acid, THAT becomes a buffer solution. Additionally, a weak acid that can attack a metal, is still a weak acid that can attack a metal. If you don't neutralise it, and wash it off, it's going to be able to keep attacking. It works the same way when battery acid dries, get that stuff somewhere, and then it gets wet, and off it goes again breaking things down. There's a reason why people prefer a weak acid, and it's because they want TIME to be able to be on their side. IE, DIY guys are happy to leave some mild steel in vinegar for 24 hours to get mill scale off. However, if you want to do it chemically in industry, you grab the muriatic acid. If you want to do it quicker at home, go for the acetic acid if you don't want muriatic around. At the end of the day, look at the above thumbnail, as it proves what I said in the earlier post, you can clean that fuel tank up all you want with the solution, but the rust that has now been removed was once the metal of the fuel tank. So how thin in spots is your fuel tank getting? If the magazine on the left, is the actual same magazine as on the right, you'll notice it even introduces more holes... Well, rust removal in general actually does that. The fuel tank isn't very thick. So, I'll state again, look to replace the tank, replace the fuel hanger, and pump, work out how the rust and shit is making it past the fuel filter, and getting into the injectors. That is the real problem. If the fuel filter were doing its job, the injectors wouldn't be blocked.
×
×
  • Create New...