Jump to content
SAU Community

Recommended Posts

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

There will also be a 'guess the power output' competition for a particular car...

Manufacturer engine output specs will be available on the day.

It will be running in 4WD mode - bets taken on the day.

Should be fun :D

There will also be a 'guess the power output' competition for a particular car...

Manufacturer engine output specs will be available on the day.

It will be running in 4WD mode - bets taken on the day.

Should be fun :D

You taking bets on what car as well?

1989 VAZ Lada Niva 2121c

Will work out a closest 'guess to the nearest .1 kw' sheet. I say 28.4 - but money talks on the day :D

Engine type: VAZ-2121 type. Water cooling serial 4 cylinder OHC gasoline engines

Total cubic displacement: 1,568cc

Bore × stroke: 79mm×80mm

Stroke: Bore ratio: 1.01:1

Compression ratio: 8.5:1

Fuel feeder: Carburetor

The highest output: 73.0 Hp at 5,400 rpm

Largest torque: 11.6kg-m at 3,400 rpm

brownrussian2.jpg

Max - speak to Sam.

Another car is already set to do an SAFC tune - best to do them early on (while we eating)

Also...

A raffle to help raise funds for the MAS stand - as well as the 'power guess' comp will be run on the day. If you have anything you'd like to donate to the prize pool (and I mean ANYTHING) - please let Al know.

Trophy for top power 4WD and RWD.

Sorry for not posting guys been flat out getting the D1 Datto ready for Nationals Drift comp next week....

Minor tuning such as SAFC's, boost, or timing can be carried out on the day.

Looking forward to seeing you all and welcoming you to my new home, a lot have already brought their cars for work, or just to say hi..

PS: My 'educated' guess is 29.7 kw @ all four paws

Doc.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi guys, Sorry to butt in and take it slightly off course, although still on the VCAM subject.  I had VCAM put into my Tomei 2.8 bottom end and I struggle to take off because the engine has very little torque caused by VERY low dynamic compression at 60psi. But once off the mark and especially on boost, the engine rev happily all the way to 8000rpm and makes 630hp at 20psi of boost on E85 at the rear hubs. Has anyone had any similar experience or any suggestions on what might cause this low compression at low rpm? I am in the process of converting it into a 8hp transmission and with this low torque, the engine would not even stay running until the throttle is opened to more than 30% and then I loose all vacuum. 
    • Last year I got a set of MCA street coilovers for my turbo Forester after my son hitting a concrete gutter/wall on a small bridge causing the whole drivers side suspension to get bent because the rain just made the car slide out I love them, I think they were $2400. even had a hiccup of have the wrong hub configuration (my fault) so got onto MCA and they sent the correct shock ends overnight parts from QLD, for free!  I was very impressed with their customer service and quality of the product  
    • They've had some weird failures on their brake actuators. One of them was because they added some kind of lubricant to the factory fill brake fluid that aftermarket brake fluid didn't have so it would affect the seals. Another was just mysterious, probably internal corrosion or something eating away at Prius brake actuators. Parts alone for those are a few thousand USD so not a cheap fix.
    • Selling a genuine Nissan Skyline R33 Coupe 8-Pin Power Window Master Switch Part No. 25401-26U10 Price $300   IMPUL Gear Knob – Rare JDM Upgrade Upgrade your interior with this genuine IMPUL gear knob – a rare and stylish addition to any JDM build. Premium quality, perfect fit, and an authentic Japanese touch for your ride.  Price:$300 Nissan Skyline R33 (Series 2) Sedan Tail Lights Immaculate Condition OEM JDM S2 a pair of OEM Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state. Price:$900   Located in Melbourne (Western Suburbs) – Shipping available Australia wide at buyer’s expense. DM if you need anymore details.  
×
×
  • Create New...