3540 Intake Pipe

[W0rp3D]

Any one have an idea or pictures of an intake pipe for 3540 in the factory location for an R33?

I will be running an air box, atm the only idea i have is to use 2 standard pipes cut down so they are 3" at both ends and have a 3" pipe inside to stop it from sucking closed.

[JonnoHR31]

what size inlet does the turbo have?

Edited March 5, 2011 by JonnoHR31

[W0rp3D]

what size inlet does the turbo have?

3" its the smaller .5 front instead of the .7

[scotty nm35]

The stock inlet still sucks closed at 250kw with the 3 inch pipe in there, the bend collapses. Get an alloy 80mm one made and spray it stealth matt black.

[W0rp3D]

The stock inlet still sucks closed at 250kw with the 3 inch pipe in there, the bend collapses. Get an alloy 80mm one made and spray it stealth matt black.

The pipe is a bend, there is only 1-2" either end including the part where the hose clamp goes that does not have the metal pipe inside it.

[JonnoHR31]

could just make a hard pipe and either paint it black as said or put a rubber hose around it to make it look stock

[scotty nm35]

The proof will be on the dyno, I haven't seen a stock one go over 250 but im sure they can. See how it goes I guess.

With a gt35 you should go 4 inch hardpipe imo, 80mm at the least if you are retaining the AFM.