Jump to content
SAU Community

Recommended Posts

Hi Ben,

Just wondering if you still have the standard airbag steering wheel?

Yes I do, its currently on the vehicle infact as I changed over for the roadworthy certificate...

  • 3 weeks later...

bayside? never seen ya around :( - wanted to pop around to have a bit of a captain cook, but looks like she might be heading to a new home

good luck with finalising the sale :)

No worries Daniel - cheers.

This [R] has now been officially sold with the new owner taking possession today; I'm pleased she is gone to a good home!

Thanks for all the interest and positive comments.

Cheers Ben

congrats on the sale!

may i ask if the car is staying in Melbourne?

You certainly can however I think it best to respect the new owners confidentiality mate so for that reason I am not at liberty to say sorry.

I actually saw this car yesterday afternoon at around 3:30pm. I won't say where for privacy reasons etc.

But I assume it was in the hands of the new owner?

may i ask if the car is staying in Melbourne?

I actually saw this car yesterday afternoon at around 3:30pm. I won't say where for privacy reasons etc.

That answers your Melbourne question :thumbsup:

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • What can't be done with a little bit of decking board or similar timber bolted to a hub flange via 2 wheel nuts is not worth talking about.
    • I noticed something. On the tps sensor and the sensor behind the adjustment screw is adjusted towards the far left. Are these screws supposed to be centered? (this sensor was in the same position before the tune as well)  Also attached a photo of where my car usually idles at when warm (sometimes a tiny bit above that). I think I might have screwed up the calculation and it might have better than I thought lol at 750rpm still not 650rpm though.      
    • So for both general interest of engine health, and to rule out any coolant/oil issues, I organised an oil analysis done on the 125,000klm oil Results below, all good, just a bit of fuel dilution which I'm not too worried about
    • This is actually a really good way of measuring what wheels fit. If only there was a similar measurement between hub face and suspension :p That said, it's probably pretty simple to actually measure it all with the wheel off the car for the rear. The front is a bit more complex but.. 
    • Being the top Google search result for R34 wheel-related inquiries, lemme throw down my experience. I calculated that 100mm from hub face to wheel face is about the perfect fitment for my ENR34 sedan.  I've been running 18x8.5s, ET35, with a 1" spacer. So, 8.5in to mm = 216mm. 216/2 = 108mm. 108-35 = 73mm. 73+ 25 (1" to mm) = 98mm.  If you wanna get close to this on dif widths, here are the offsets you'll want: 9" - ET around 15mm 9.5" - ET around 20mm 10" - you're crazy, but ET around 30mm All these should fit perfectly on a non-widebody, non-GTR Skyline. Note that it's probably the absolute max, and you're probably better off running a couple degrees of camber in this config, but it looks great, super flush.
×
×
  • Create New...