Jump to content
SAU Community

Whats An R35 Gtr Engine Worth?


Dominic
 Share

Recommended Posts

I have just bought 3 R35 engines rebuilt and bluepinted by Greddy performance in the US.

They cost me $45k + GST+ customs + cartage for the 3.

I only need 2, what would I get for the third?

Is there a market for them?

Link to comment
Share on other sites

Some nutjob would put one in a drag car...given it's a new market, to a degreee you have your choice of selling price...so start high? Might have to hold on to it for a while until a buyer comes though. At a guess...30k?

Link to comment
Share on other sites

well as a reference point:

$11,500 US you can get a 3.8 litre AMS built engine. $800 shipping + taxes, so for $15,000 Aussie you get an AMS 3.8L built engine to your door.

for about $22,000 Aussie you will get the big bore sleeved 4.0 race spec AMS built engine to your door.

these prices include AMS supplying a new short block

Link to comment
Share on other sites

well as a reference point:

$11,500 US you can get a 3.8 litre AMS built engine. $800 shipping + taxes, so for $15,000 Aussie you get an AMS 3.8L built engine to your door.

for about $22,000 Aussie you will get the big bore sleeved 4.0 race spec AMS built engine to your door.

these prices include AMS supplying a new short block

Wow, we've come a long way from a $75k crate motor situation! And/or not being able to even source a block. Makes the whole warranty thing even more of a joke.

Link to comment
Share on other sites

well as a reference point:

$11,500 US you can get a 3.8 litre AMS built engine. $800 shipping + taxes, so for $15,000 Aussie you get an AMS 3.8L built engine to your door.

for about $22,000 Aussie you will get the big bore sleeved 4.0 race spec AMS built engine to your door.

these prices include AMS supplying a new short block

That is a short block only as I contacted them, because I thought it was a great price.

So add the head, gaskets, blue printing, fitting together and transport.

Then customs of 5% and GST of 10% of the costs plus the transport. Quarantine, port docking fee, customs clearance handler. Id say your looking at about $23-$25k for the base 3.8 engine.

Not including your labour, insurance, picking up the engine fom Port Kembla, the cost of money exchange, paying the money 3 months before you get the engine.

Link to comment
Share on other sites

yep I mentioned it was a short block in my post, those prices are including taxes and freight if you read it. I should know I have just bought a 4.0 AMS......

having said all that if the Greddy kit includes all the heads etc then that seems like a very good price., how much are the factory heads to buy off the shelf?

Link to comment
Share on other sites

Wow, we've come a long way from a $75k crate motor situation! And/or not being able to even source a block. Makes the whole warranty thing even more of a joke.

is there anything even wrong with the engine?

warranty issues over hyped on the interweb seem to be with the box

Link to comment
Share on other sites

yep I mentioned it was a short block in my post, those prices are including taxes and freight if you read it. I should know I have just bought a 4.0 AMS......

having said all that if the Greddy kit includes all the heads etc then that seems like a very good price., how much are the factory heads to buy off the shelf?

Looks like around $2200 each. That's only a bare head though, no cams, valves, springs etc.

Link to comment
Share on other sites

is there anything even wrong with the engine?

warranty issues over hyped on the interweb seem to be with the box

Just generally speaking Dom. Basically the hoops Nissan would have any of us jump through if tracking the car. Too hard basket for my money.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Are these the Dmax ones you are in reference too? https://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35#description Not a bad idea to get the uni flange ones. I have sent just jap an email too. Will see what they say lmao. Only thing is the Dmax ones are on a big back order. Low key anything will be better then my OEM ones I got as they are sounding like popcorn when I go under load lmao 😂☠️🪦.
    • They should do. I have S14 (or something S chassis, anyway) driveshafts in my R32 (because my diff flanges have 3x2). They're the right length. When you go looking for R32/3/4 driveshafts (for turbos), they're all the same thing, so are the same length. So there really shouldn't be any reason why those cheapies from JJ won't also fit an R34. R32/3 NA should also be the same thing. The (3x the price) D-Max ones are uni-fit. They have 5x1 and 3x2 bolt holes and say they cover all the cars. So that would also suggest that they are all the same except for the flanges. And in that case, the flange goes both ways. I'd be buying the D-Max ones if I ever have to replace a shaft. Because that will open up diff options without needing to juggle shafts also. Juggling shafts is gay.
    • Yeah with the adaptors they do look like the photo above - just the fitment within the plenum itself and then further with the rail to the intake is questionable - we shall see tomorrow hopefully once I get some replies from Aeroflow, maybe those bosses are the missing piece....
    • Should be fine, if you have it sitting too far in, you end up just spraying the walls and have shit idle. You "can" run them like that, however I don't think it's a great idea (also depends on your plenum, might be good to just get the injector bosses first, mock it up and see if you need to get the bottom extension) Ideally your injectors, with the extension should look like this  (Not my photos, just Google)
    • Thanks for the replies guys, it's really appreciated.  It seems the kit was supposed to come with those injector bosses but hasn't. Unsure if they'll help as even with the adaptors to make them a 3/4 height injector they still sit too far out so mount the fuel rail?
×
×
  • Create New...