Jump to content
SAU Community

Recommended Posts

hi guys!

usually thursdays at either carseldine, or a cruise down to see the westies.

best place to test that suspension is at happy laps, we need more people to race around lakeside :)

Ive got BC V1's and so far no issues, nice shocks

hey guys,

havn't been on here for a lil while just lurking around learning :)

question I have for you tho.

the Hicas light has come on in the missus R33 4 door when driving for the ol 10 mins around 80kmh etc

there is a little bit of play in the inner tie rods from the look of it.

so what are our options? do we need to replace the inner tie rods AND get a lock bar or is the play in the rack it self? or should we get the Hicas Eliminator kit that driftworks/cartel sells? which replaces EVERYTHING with new arms

the other issue it is having now is when you start it up especially when cold it sort of struggles to bring the idle up, I cleaned out the IAC not long ago and its still doing it so not sure what the go is there any ideas??

cheers

hey guys,

havn't been on here for a lil while just lurking around learning :)

question I have for you tho.

the Hicas light has come on in the missus R33 4 door when driving for the ol 10 mins around 80kmh etc

there is a little bit of play in the inner tie rods from the look of it.

so what are our options? do we need to replace the inner tie rods AND get a lock bar or is the play in the rack it self? or should we get the Hicas Eliminator kit that driftworks/cartel sells? which replaces EVERYTHING with new arms

Personally i recommend the eliminator kit. I got one a few months back and love it. Specially if you ass end is getting a little happy. Makes the car a whole lot more predicatable. By the sounds of it you rods need replacing anyway so the cost of new rods + lock bar will be very similar. I got mine from cartel

cheers for the advice,

its only auto and the wife doesn't rape it too much, but her fuel economy is terrible :(

its stock with only the 7psi all the time solenoid grounded and a pod filter(DRIFT brand dry one not oiled like a K&N)

and we have changed everything except the AFM so far(changed spark plugs today so see if that makes a difference)

getting only 350km till it reads pretty close to E

Hi everyone!

Car: 1995 R33 GTST.

Colour: Midnight purple

Mods:Pod, Exhaust, HKS FMIC, Rota p45R rims

Plans for the next Mods: Splitfire coilpacks, boost tee/r32 actuator + boost gauge, paint mesh black, wash her :P

Owned for: 2 weeks

Any other imports(this can be current or previously owned): none :)

anything else you can think of feel free to add, hey guys, i live in aroung the nundah area. Wouldnt mind hanging out with other skyline owners around the place. If anyone wants to come help me get my intercooler set up better i would appreciate it :P

img0185ed.jpg

img0187kv.jpg

img0188dy.jpg

What's up with the intercooler? Installing one?

My cars economy isnt too flash. 330 when it hits qtr left. Not fame to push it tbh! My Holden use to run empty at qtr of a tank lol..

cheers for the advice,

its only auto and the wife doesn't rape it too much, but her fuel economy is terrible :(

its stock with only the 7psi all the time solenoid grounded and a pod filter(DRIFT brand dry one not oiled like a K&N)

and we have changed everything except the AFM so far(changed spark plugs today so see if that makes a difference)

getting only 350km till it reads pretty close to E

My wife granny drives mine and can get almost 100km more out of a tank :( than i do.

but i'd say your economy has alot to do with the auto, and how much she loads it up in each gear (or how much the box forces her to do so...lol)

other than that its all about the drive, if i only drive to and from work in traffic and with the cold start i get 360-370km. as soon as i get any highway use its 400+

Also does anyone know if r33 GTR series 1 dash cluster will work in gtst series 2?

no idea sorry, i dont see why not tho. most of these clusters fit/look the same

Hi everyone!

Car: 1995 R33 GTST.

Colour: Midnight purple

Mods:Pod, Exhaust, HKS FMIC, Rota p45R rims

Plans for the next Mods: Splitfire coilpacks, boost tee/r32 actuator + boost gauge, paint mesh black, wash her :P

Owned for: 2 weeks

Any other imports(this can be current or previously owned): none :)

anything else you can think of feel free to add, hey guys, i live in aroung the nundah area. Wouldnt mind hanging out with other skyline owners around the place. If anyone wants to come help me get my intercooler set up better i would appreciate it :P

img0185ed.jpg

img0187kv.jpg

img0188dy.jpg

car looks good man, would like to see those wheels in person, what offset are they?

What's up with the intercooler? Installing one? <----(like he said, looks like its there)

My cars economy isnt too flash. 330 when it hits qtr left. Not fame to push it tbh! My Holden use to run empty at qtr of a tank lol..

man...you guys have no faith in your cars...lol. run it empty just to find out, i often leave it till well and truely empty and the fuel light is on before filling. i know exactly how empty i can run it (made it to a servo with 2 litres left once).

Holden doesnt count as a reference to anything :P

on another note, Carseldine and visit the westies this thursday??

Sorry about the double post (I only phone). About the intercooler? Yeah it's on there but only just. I want to try to get it to sit maybe slightly higher or if not at least straight and centred. It's pushed far over to the passengers side. :P looks pretty average. Not sure if I should paint it black or not.

Sorry about the double post (I only phone). About the intercooler? Yeah it's on there but only just. I want to try to get it to sit maybe slightly higher or if not at least straight and centred. It's pushed far over to the passengers side. :P looks pretty average. Not sure if I should paint it black or not.

Ahk, I might be able to help you but not sure on a day as of yet. You could bring it to a mate of mine while we respray my car if your keen for a car talk etc?

Leave it chrome! Bodo painted his blak and it suits the white car, but te chrome with your black would suit better. All to do with preferences.

Yeah I'll try that bodo, see how far I can get:p

Sorry about the double post (I only phone). About the intercooler? Yeah it's on there but only just. I want to try to get it to sit maybe slightly higher or if not at least straight and centred. It's pushed far over to the passengers side. :P looks pretty average. Not sure if I should paint it black or not.

that fine adjustment, and straightening of the cooler i found to be the biggest pain in the ass of all :(

Black looks good, nice and discrete :)

as for tonight, im keen for a cruise to see the westies. i say we meet at Carseldine pizza capers at 7:30pm and cruise from there.

mumslayer and myself will be at the morayfield BP's southbound on the highway at 7pm, if your coming from up this way

I'd love to catch up sometimes with you young'uns. I've got uni every Thursday night so have never made it.

Just put some RSRs on the R33 so heaps of grip if I happen to come across some corners. The car isn't being driven much atm as it need to visit the smash repairers for a minor front end bingle.

Getting it prepped for Lakeside happy laps, then some proper laps.

Got to put the braided lines on, rebuild the rear calipers (done the front), put new rear rotors on and new pads all round. Then WINNING.

Edited by simpletool

I'd love to catch up sometimes with you young'uns. I've got uni every Thursday night so have never made it.

Just put some RSRs on the R33 so heaps of grip if I happen to come across some corners. The car isn't being driven much atm as it need to visit the smash repairers for a minor front end bingle.

Getting it prepped for Lakeside happy laps, then some proper laps.

Got to put the braided lines on, rebuild the rear calipers (done the front), put new rear rotors on and new pads all round. Then WINNING.

sounds good man, and who are you calling youngens? :P

Mumslayer just put some Achilles 123S on his (cheaper than an RSR, but similar) and he loved it at the last happy laps. and they looks good too :)

Have no fear for i fixed it! Loose air inlet on the boost tee tighten and win

yeah was gonna say, prob just a small leak.

I got the tap set so i can build that gear knob for you man, drop it round to me some arvo and ill get it done in my spare time.

I wont be heading out tomorrow night......im tired enough as it is.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
    • Don't use that manifold. Please don't use that manifold. Sunk cost fallacy is not worth the later pain. None of these will be relevant to the change that will come from the different turbo and manifold. As in, the effect of the exhaust will be nil, regardless of what else is changed. And all the cam and fuel system stuff is not changing either way, so has no effect. The turbo and manifold (and to a small extent the wastegate)....big change.
    • Just wanted to say thank you for your input   my man (lead mechanic by trade) and I have done a heap of work as you can imagine just to make the hot side work with the dump pipe, stupid massive intake on turbo, trying to get the waste gate on was not fun.  I’m kinda getting to the point where I don’t know if I try and make this work and not throw all this cash and time away or do I scrap the lot and start again? the Apexi I’ve got was tuned for a few slight differences:   Tomei pon cams (mine are stock neo) Turbo smart 38mm external waste gate (mines 45mm replumbed) with stainless screamer pipe  3inch turbo back exhaust with high flow cat Sard 800cc top feed injectors Sard adjustable fuel pressure reg    
    • Out here E90s are the cheapest way into a sporty-ish car because everyone knows just how expensive the repairs can get. 8-10k USD for an automatic 335i. 
×
×
  • Create New...