Jump to content
SAU Community

Recommended Posts

hi guys!

usually thursdays at either carseldine, or a cruise down to see the westies.

best place to test that suspension is at happy laps, we need more people to race around lakeside :)

Ive got BC V1's and so far no issues, nice shocks

hey guys,

havn't been on here for a lil while just lurking around learning :)

question I have for you tho.

the Hicas light has come on in the missus R33 4 door when driving for the ol 10 mins around 80kmh etc

there is a little bit of play in the inner tie rods from the look of it.

so what are our options? do we need to replace the inner tie rods AND get a lock bar or is the play in the rack it self? or should we get the Hicas Eliminator kit that driftworks/cartel sells? which replaces EVERYTHING with new arms

the other issue it is having now is when you start it up especially when cold it sort of struggles to bring the idle up, I cleaned out the IAC not long ago and its still doing it so not sure what the go is there any ideas??

cheers

hey guys,

havn't been on here for a lil while just lurking around learning :)

question I have for you tho.

the Hicas light has come on in the missus R33 4 door when driving for the ol 10 mins around 80kmh etc

there is a little bit of play in the inner tie rods from the look of it.

so what are our options? do we need to replace the inner tie rods AND get a lock bar or is the play in the rack it self? or should we get the Hicas Eliminator kit that driftworks/cartel sells? which replaces EVERYTHING with new arms

Personally i recommend the eliminator kit. I got one a few months back and love it. Specially if you ass end is getting a little happy. Makes the car a whole lot more predicatable. By the sounds of it you rods need replacing anyway so the cost of new rods + lock bar will be very similar. I got mine from cartel

cheers for the advice,

its only auto and the wife doesn't rape it too much, but her fuel economy is terrible :(

its stock with only the 7psi all the time solenoid grounded and a pod filter(DRIFT brand dry one not oiled like a K&N)

and we have changed everything except the AFM so far(changed spark plugs today so see if that makes a difference)

getting only 350km till it reads pretty close to E

Hi everyone!

Car: 1995 R33 GTST.

Colour: Midnight purple

Mods:Pod, Exhaust, HKS FMIC, Rota p45R rims

Plans for the next Mods: Splitfire coilpacks, boost tee/r32 actuator + boost gauge, paint mesh black, wash her :P

Owned for: 2 weeks

Any other imports(this can be current or previously owned): none :)

anything else you can think of feel free to add, hey guys, i live in aroung the nundah area. Wouldnt mind hanging out with other skyline owners around the place. If anyone wants to come help me get my intercooler set up better i would appreciate it :P

img0185ed.jpg

img0187kv.jpg

img0188dy.jpg

What's up with the intercooler? Installing one?

My cars economy isnt too flash. 330 when it hits qtr left. Not fame to push it tbh! My Holden use to run empty at qtr of a tank lol..

cheers for the advice,

its only auto and the wife doesn't rape it too much, but her fuel economy is terrible :(

its stock with only the 7psi all the time solenoid grounded and a pod filter(DRIFT brand dry one not oiled like a K&N)

and we have changed everything except the AFM so far(changed spark plugs today so see if that makes a difference)

getting only 350km till it reads pretty close to E

My wife granny drives mine and can get almost 100km more out of a tank :( than i do.

but i'd say your economy has alot to do with the auto, and how much she loads it up in each gear (or how much the box forces her to do so...lol)

other than that its all about the drive, if i only drive to and from work in traffic and with the cold start i get 360-370km. as soon as i get any highway use its 400+

Also does anyone know if r33 GTR series 1 dash cluster will work in gtst series 2?

no idea sorry, i dont see why not tho. most of these clusters fit/look the same

Hi everyone!

Car: 1995 R33 GTST.

Colour: Midnight purple

Mods:Pod, Exhaust, HKS FMIC, Rota p45R rims

Plans for the next Mods: Splitfire coilpacks, boost tee/r32 actuator + boost gauge, paint mesh black, wash her :P

Owned for: 2 weeks

Any other imports(this can be current or previously owned): none :)

anything else you can think of feel free to add, hey guys, i live in aroung the nundah area. Wouldnt mind hanging out with other skyline owners around the place. If anyone wants to come help me get my intercooler set up better i would appreciate it :P

img0185ed.jpg

img0187kv.jpg

img0188dy.jpg

car looks good man, would like to see those wheels in person, what offset are they?

What's up with the intercooler? Installing one? <----(like he said, looks like its there)

My cars economy isnt too flash. 330 when it hits qtr left. Not fame to push it tbh! My Holden use to run empty at qtr of a tank lol..

man...you guys have no faith in your cars...lol. run it empty just to find out, i often leave it till well and truely empty and the fuel light is on before filling. i know exactly how empty i can run it (made it to a servo with 2 litres left once).

Holden doesnt count as a reference to anything :P

on another note, Carseldine and visit the westies this thursday??

Sorry about the double post (I only phone). About the intercooler? Yeah it's on there but only just. I want to try to get it to sit maybe slightly higher or if not at least straight and centred. It's pushed far over to the passengers side. :P looks pretty average. Not sure if I should paint it black or not.

Sorry about the double post (I only phone). About the intercooler? Yeah it's on there but only just. I want to try to get it to sit maybe slightly higher or if not at least straight and centred. It's pushed far over to the passengers side. :P looks pretty average. Not sure if I should paint it black or not.

Ahk, I might be able to help you but not sure on a day as of yet. You could bring it to a mate of mine while we respray my car if your keen for a car talk etc?

Leave it chrome! Bodo painted his blak and it suits the white car, but te chrome with your black would suit better. All to do with preferences.

Yeah I'll try that bodo, see how far I can get:p

Sorry about the double post (I only phone). About the intercooler? Yeah it's on there but only just. I want to try to get it to sit maybe slightly higher or if not at least straight and centred. It's pushed far over to the passengers side. :P looks pretty average. Not sure if I should paint it black or not.

that fine adjustment, and straightening of the cooler i found to be the biggest pain in the ass of all :(

Black looks good, nice and discrete :)

as for tonight, im keen for a cruise to see the westies. i say we meet at Carseldine pizza capers at 7:30pm and cruise from there.

mumslayer and myself will be at the morayfield BP's southbound on the highway at 7pm, if your coming from up this way

I'd love to catch up sometimes with you young'uns. I've got uni every Thursday night so have never made it.

Just put some RSRs on the R33 so heaps of grip if I happen to come across some corners. The car isn't being driven much atm as it need to visit the smash repairers for a minor front end bingle.

Getting it prepped for Lakeside happy laps, then some proper laps.

Got to put the braided lines on, rebuild the rear calipers (done the front), put new rear rotors on and new pads all round. Then WINNING.

Edited by simpletool

I'd love to catch up sometimes with you young'uns. I've got uni every Thursday night so have never made it.

Just put some RSRs on the R33 so heaps of grip if I happen to come across some corners. The car isn't being driven much atm as it need to visit the smash repairers for a minor front end bingle.

Getting it prepped for Lakeside happy laps, then some proper laps.

Got to put the braided lines on, rebuild the rear calipers (done the front), put new rear rotors on and new pads all round. Then WINNING.

sounds good man, and who are you calling youngens? :P

Mumslayer just put some Achilles 123S on his (cheaper than an RSR, but similar) and he loved it at the last happy laps. and they looks good too :)

Have no fear for i fixed it! Loose air inlet on the boost tee tighten and win

yeah was gonna say, prob just a small leak.

I got the tap set so i can build that gear knob for you man, drop it round to me some arvo and ill get it done in my spare time.

I wont be heading out tomorrow night......im tired enough as it is.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I have one and it was at ~43.5PSI.
    • Put a pressure gauge on the fuel rail.
    • I've uploaded logs / the current map to Gdrive if anyone has any ideas. https://drive.google.com/drive/folders/1FPnr22Z-EilG7tYdHSi0Qb07P2jfFLKV?usp=sharing
    • I'm running a Haltech Platinum Pro with the stock map for the RB20DET + tweaks for my build. When I started it this morning, the IAT was at 32F/0C (Outside temp was ~42F) and the AFRs went off the scale for my AEM gauge. I let it run for ~30 seconds then turned it off. I then did a smoke test, by hooking into a vacuum line directly behind the throttle body, and confirmed there was no leaks ( i let the smoke tester run for ~5 minutes / confirmed it was generating smoke before hand ). I then started the car again, after fixing a power steering leak.... and it seemed to be happy for ~30 seconds (was at ~11/12), but then seemingly shot back up to ~18 again. I then let the car run for a few minutes, thinking this was just cold start related, but the AFRs never came back down. I didn't let the car fully warm up, so maybe this makes sense, but I'm not sure what to do? The AFRs, when I last ran it, were normal, but because of personal reasons I haven't been able to break in the car. It was rebuilt last year. Engine / Mod list: Supertec pistons Spool rods Kelford 270 cams and Springs Stock crank Deatschwerks 900cc injectors Walbro 255 (Wired directly to the battery relocated in the trunk) NKG Audi R8 Coil packs + Conversion Harnesses from Wiring Specialties Holset HY35 turbo Haltech Platinum Pro ECU Haltech boost controller (wired in for high boost RB25 Neo transmission + needed bits for the speedo to work  
×
×
  • Create New...