Jump to content
SAU Community

Recommended Posts

omfg read my previous post. i never said anything about an rb30 is better or flows better than a 25!!!!!!!!!!!!

He means the twin cam head obviously is a shitload better than a RB30 head.

Therefore as I said, if you were going to all the effort of putting a RB30 into a Skyline you would build a RB30/25 or a RB30/26. Look, we have a whole forum section dedicated to it:

http://www.skylinesaustralia.com/forums/forum/184-rb30-conversions/

What are your reasons for wanting a RB30 SOHC in there when it is a worse engine than a RB25 or a RB26 and a hell of a lot worse than a RB30/25 or a RB30/26?

  • Replies 75
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

why stop at a RB30E?

Make it a carby one and get some serious.... anti... something...

Yes a RB30E can go in a R32\33\34, and it'll go right on the skyline gearbox (i think) but you'll need the appropriate ECU, loom, all that.

It's a lot of hard work for no gain.

So unless you've got a Skyline with no engine and a VL commodore with a smashed up rear end, no money but plenty of tools, patience and time; I can't really see the point.

wtf is with so much hating. you blokes go crazy over a twin cam rb30. but as soon as a single cam is mentioned your the devil for saying anything about it LOL ffs.

im doing it cause it will be cheap and easy cause im on my p's so i need to make my 32 n/a and i can get an rb30 for nothing as opposed to spending thousand on a rb25. then when i get my full licence ill put a 25 head on and a big setup and put a big f**k off setup on it.

Edited by obsesv

This is you car right?

http://cgi.ebay.com....=item230f15e7db

My The land of goat sphincter rings friend was telling me of a guy who had a Ferrari and wanted to convert it to LPG. He went around to the local workshops and no one wanted/could do it. So he consulted Ferrari, who were so shocked to learn that someone wanted to convert one of the most iconic sports cars ever to LPG,so they sent someone to buy the car back off him. Not sure how true it is, but there is a good message.

RB30e<RB20DET

Edited by robincooper

wtf is with so much hating. you blokes go crazy over a twin cam rb30. but as soon as a single cam is mentioned your the devil for saying anything about it LOL ffs.

im doing it cause it will be cheap and easy cause im on my p's so i need to make my 32 n/a and i can get an rb30 for nothing as opposed to spending thousand on a rb25. then when i get my full licence ill put a 25 head on and a big setup and put a big f**k off setup on it.

Ok let's get something straight here:

1) You NEVER said you were on your P's and therefore could not drive a turbo car. We were all assuming you are talking about a turbo engine given that it is in the "Forced Induction" area.

So in essence you are talking about putting a NA RB30 into it? Well that is even more of a joke as to why you would bother.

2) You said you "need to make your 32 n/a", does that mean it is a GTST at the moment with a RB20DET in it?

i had a 12 second vl before i got the r32 i currently have. the whole setup owed me no more than 2 grand and it made over 200rwkw with a standard computer and an untouched non turbo rb30. i have a mate making 380hp with an also completely stock non turbo rb30 bar a head gasket and cam.

Now back to this comment. I skimmed over it and once again assumed we were talking about a turbo RB30 so didn't think much of it. So you are saying with a non turbo RB30 VL and spending $2000 without touching the ECU you made 200rwkw and ran a 12 second pass?? Please explain because that is absolute bullshit.

Now to your mates non turbo RB30. So 380 flywheel horsepower? So say 200-230rwkw with just a head gasket and a cam? Seriously absolute bullshit.

Prove me wrong with a dyno sheet.

Here are the two highest dyno results for a N/A RB30 from the r31 forum.

GTS_143 (NSW)177rwkwRB30DE

(R33 VCT Head) (ported) with stage 2 cams, 12:1 comp, Monster

Extractors, lightened & balanced bottom end, twin 64mm XF TB's, Full

3" Exhaust, Link ECU, CAI & Pod, Twin Thermos.

#2DMN NA (NSW)154.6rwkwRB30DE,

RB26 head, Between 12:1 and 12.5:1 comp, Balanced rods, RB25DE pistons,

RB20DET 270cc injectors, Crank grub screwed, oil restrictors, N1 GT-R

rings, Adaptronic ECU, Hurricane Equal Length extractors, 2.5" mandrel

bent exhaust, 3" stainless cat, hot dog, mega flow rear muffler,

Splitfire Coilpacks, Adjustable cam gears

Both with twin cam heads and much dollars spent.

The claim of 200rwkw with no more than $2000 is a bit rich.

Here are the two highest dyno results for a N/A RB30 from the r31 forum.

GTS_143 (NSW)177rwkwRB30DE

(R33 VCT Head) (ported) with stage 2 cams, 12:1 comp, Monster

Extractors, lightened & balanced bottom end, twin 64mm XF TB's, Full

3" Exhaust, Link ECU, CAI & Pod, Twin Thermos.

#2DMN NA (NSW)154.6rwkwRB30DE,

RB26 head, Between 12:1 and 12.5:1 comp, Balanced rods, RB25DE pistons,

RB20DET 270cc injectors, Crank grub screwed, oil restrictors, N1 GT-R

rings, Adaptronic ECU, Hurricane Equal Length extractors, 2.5" mandrel

bent exhaust, 3" stainless cat, hot dog, mega flow rear muffler,

Splitfire Coilpacks, Adjustable cam gears

Both with twin cam heads and much dollars spent.

The claim of 200rwkw with no more than $2000 is a bit rich.

my vl was turbo buddy

Edited by obsesv

Many people underestimate the RB30ET

I think it would be a unique conversion because many people would not see the point. If you have your mind set on it, then go for it. It can be done easily. But be aware that you WILL devalue the car by doing it and you may get a bit of flack from people who don't understand the reason behind it.

wtf is with so much hating. you blokes go crazy over a twin cam rb30. but as soon as a single cam is mentioned your the devil for saying anything about it LOL ffs.

im doing it cause it will be cheap and easy cause im on my p's so i need to make my 32 n/a and i can get an rb30 for nothing as opposed to spending thousand on a rb25. then when i get my full licence ill put a 25 head on and a big setup and put a big f**k off setup on it.

The crux of the issue is basically this.

1. You are on Ps

2. You were dumb and purchased an illegal turbo

3.a. you have already been defected

3.b. you are worried about being defects

4. You think RB30E will fix all the above?

Sadly kid - It's illegal and not registrable.

You cannot go BACKWARDS to the chassis. It breaks all the ADR's.

Ok let's get something straight here:

1) You NEVER said you were on your P's and therefore could not drive a turbo car. We were all assuming you are talking about a turbo engine given that it is in the "Forced Induction" area.

So in essence you are talking about putting a NA RB30 into it? Well that is even more of a joke as to why you would bother.

2) You said you "need to make your 32 n/a", does that mean it is a GTST at the moment with a RB20DET in it?

Now back to this comment. I skimmed over it and once again assumed we were talking about a turbo RB30 so didn't think much of it. So you are saying with a non turbo RB30 VL and spending $2000 without touching the ECU you made 200rwkw and ran a 12 second pass?? Please explain because that is absolute bullshit.

Now to your mates non turbo RB30. So 380 flywheel horsepower? So say 200-230rwkw with just a head gasket and a cam? Seriously absolute bullshit.

Prove me wrong with a dyno sheet.

for f**ks sake my vl was turbo!!!!!!!!!!!! 200rwkw in any non turbo 6 cylinder is impossible.

yeah i started this thread wanting to know if its even been done with a turbo application, i never started the thread to talk about my plan of doing it!!

and yes my skyline has an rb20det

Edited by obsesv

Many people underestimate the RB30ET

I think it would be a unique conversion because many people would not see the point. If you have your mind set on it, then go for it. It can be done easily. But be aware that you WILL devalue the car by doing it and you may get a bit of flack from people who don't understand the reason behind it.

THANK YOU!!!!!!!!!!!!!!!!!!!!

this thread has gone WAY off topic i never ever intended on having any sort of conversation about actually doing it in my car. i got flamed for asking a simple question for god knows why!?

The crux of the issue is basically this.

1. You are on Ps

2. You were dumb and purchased an illegal turbo

3.a. you have already been defected

3.b. you are worried about being defects

4. You think RB30E will fix all the above?

Sadly kid - It's illegal and not registrable.

You cannot go BACKWARDS to the chassis. It breaks all the ADR's.

sorry but where is it said i have been defected???

they dont make power? WHAT!!??

i had a 12 second vl before i got the r32 i currently have. the whole setup owed me no more than 2 grand and it made over 200rwkw with a standard computer and an untouched non turbo rb30. i have a mate making 380hp with an also completely stock non turbo rb30 bar a head gasket and cam. i also have another mate making 400hp with a stock turbo rb30, just has a cam and valve springs.

im not trying to say they are better than a 25, but they make power just as easy, and have an extra 500cc! and in my opinion are alot more simple and easy to work on. yeah as a vl owner i guess im just more biased to the rb30.

im thinking of doing it cause ive never seen it done and it would be something totally different. obviously the long term plan would be a single cam head for when i want to make some really serious power

for f**ks sake my vl was turbo!!!!!!!!!!!! 200rwkw in any non turbo 6 cylinder is impossible.

yeah i started this thread wanting to know if its even been done with a turbo application, i never started the thread to talk about my plan of doing it!!

and yes my skyline has an rb20det

wait a sec,

and I quote: "i had a 12 second vl before i got the r32 i currently have. the whole setup owed me no more than 2 grand and it made over 200rwkw with a standard computer and an untouched non turbo rb30"

Ok let's get something straight here:

1) You NEVER said you were on your P's and therefore could not drive a turbo car. We were all assuming you are talking about a turbo engine given that it is in the "Forced Induction" area.

So in essence you are talking about putting a NA RB30 into it? Well that is even more of a joke as to why you would bother.

2) You said you "need to make your 32 n/a", does that mean it is a GTST at the moment with a RB20DET in it?

Now back to this comment. I skimmed over it and once again assumed we were talking about a turbo RB30 so didn't think much of it. So you are saying with a non turbo RB30 VL and spending $2000 without touching the ECU you made 200rwkw and ran a 12 second pass?? Please explain because that is absolute bullshit.

Now to your mates non turbo RB30. So 380 flywheel horsepower? So say 200-230rwkw with just a head gasket and a cam? Seriously absolute bullshit.

Prove me wrong with a dyno sheet.

are you special? my mates vl is turbo aswell wtf is wrong with you bro deadset. the people on this forum are nuts

what i meant by my mates motor is non turbo is.. its a factory non turbo motor, with a turbo setup on it. im terribly sorry for wording that very wrong!

i was trying to get the point across at the strength of an internally standard rb30

Edited by obsesv
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I have an Elite 2500, honestly most of this has been a lot of smaller tasks chasing little details and a whole lot of life getting in the way of bigger projects. I don't mind too much looking at a spectrograph vs having audio knock ears. 
    • Nah nah nah nah. Don't do it. It's not all about the full throttle power delivery. The main "street fun" and drivability gains from smaller rear (in this case) is how you will have boost available from a low rpm when yo just roll onto the throttle. Think jinking in and out of traffic, coming out of roundabouts, etc etc, where you just want to roll onto the throttle a little and have the spooly noise from ~2000rpm and a swell of torque. More of what you've already achieved by going to 2.5. And then, towards the tail end of 2025 you can pull the turbo 4 out and put in a V8 like we originally suggested. :P
    • Cheers for the info mate, I'm old too, 60 years old next May, so a more linear delivery of the 0.86 would be better as baking tyres and snapping heads isn't on the cards for me or the car I assume a more linear power delivery would be better for engine and drivetrain reliability as well, IRT the torque load at lower RPM???, as well as lower EGT's???, if my understanding of that is correct, have I got that right??? I've only got a really basic understanding of turbo sizing and all there characteristics  Cheers for the useful information 
    • What kind of power delivery are you after? If it's nice and linear, the 0.86 would be better. If you're after bake tyres and head snaps on boost the 0.64 would be fun. I'm boring and old, so linear power is preferred. Lately I've been watching videos on Z06 Corvettes and super charged Mustangs.... 
    • I’d go the smaller rear just because you’re staying on 98, if e85 I’d go the bigger one
×
×
  • Create New...