Jump to content
SAU Community

Recommended Posts

Hey everybody, does anyone know the measurements to a stock radiator in a R34 GTT. I'm looking at upgrading to a PWR product, If anyone has already done this what were the benefits you saw, how long did it take and how much did it cost.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/357537-from-stock-radiator-to-pwr/
Share on other sites

Two bolts for shroud, two bolts for radiator top supports... bottom hose, flush coolant, remove top hose, remove radiator and replace.

Took me about 20 minutes to remove the old one and replace. Looks fat and will give you so much better cooling potential. Very worthwhile upgrade in my opinion.... next is silicone hoses and better clamps.

Also the radiator has nice strong alloy hose outlets, as opposed to crappy plastic ones that break in your hoses.

Thanks mate spoke to a guy called jamie at Natrad radiators in midvale said its top of the line in radiators, but also mentioned that if your at the lights it can creep up over half way on the thermostat, but as soon as you get going again it flys back down, do you think this is a huge problem or is it cause that the radiator is made out of aluminium. Also I'm gettin a Garrett GT30 turbo upgrade, bigger injectors and a airflow meter installed soon do you think that having the radiator put in will help keep everything cooler or be the same with a stock.

It will probably be the same as stock or better. Ebay aluminum radiators work a treat :) no problems with them so for a while.

Depends what you're using them for.

I had an ebay ally radiator and it used to heatsoak something horrid after half an hour on the hwy and temps would just steadily increase. It also couldn't handle a decent burnout on a 40deg day, would spit coolant everywhere.

Turfed it in favour of a stock 32GTR radiator and the difference was huge. Temps well under control, a good 2.5min burnout on a 40deg day would see no more than 105deg.

Also a FYI, temps WILL increase when stationary UNTIL hot enough to engage the clutch on the engine fan. If it gets TOO hot, the A/C fan will kick in.

Another FYI, you won't notice the needle on your factory temp gauge move until the temps are over 100deg.

  • 10 months later...

Nah not yet mate was gonna be the last of my engine mods, previous mods were tomei typeB camshafts, bigger rear housing on turbo, on top of other previous mods now running 324HP so pretty decent for everday car will post up when done and if increase in hp or better performance overall. Spoke to a guy a Natrad radiators a few times, so have a few other people on this site says there the shit, so i will have it done eventually.

Are you having overheating problems at the moment? Do you have an oil cooler?

I am running the stock radiator and clutch fan with 400rwhp and no overheating issues.. Got a bit hot on the AHG pan with then it was understandable considering the ambient temps.

An oil cooler would be of a lot greater assistance than going for a replacement radiator - unless it is faulty.

Are you having overheating problems at the moment? Do you have an oil cooler?

I am running the stock radiator and clutch fan with 400rwhp and no overheating issues.. Got a bit hot on the AHG pan with then it was understandable considering the ambient temps.

An oil cooler would be of a lot greater assistance than going for a replacement radiator - unless it is faulty.

Good point on the oil cooler. I'm not sure about the OP but my radiator is visually rusted inside so I'll conduct another flush and replacement. I'm also considering a cross-flow radiator. Anyone have any experience with the PWR crossflow (or any other company)?

  • 2 weeks later...

In all honesty mate spend your money on something else for your car.

My 32 is running a standard rad and after 5-6 laps of beating the piss out of it around barbs it is still only around about 115 deg.

IMO dont replace it unless it's broken

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I drive the Tiguan much harder than the Skyline in all conditions, because it just grips and hooks, unlike the R33 shit box
    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
×
×
  • Create New...