Jump to content
SAU Community

Drillers Offsider


farris
 Share

Recommended Posts

Ok I have just been offered a drillers offsider position and I can choice either surface or underground.

Just wondering if anyone here has any experience in the drilling industry.

Both positions are fifo, 2 and 1 roster and pretty similar pay. (underground slightly more)

Link to comment
Share on other sites

i had this a few years ago(not with drilling). experienced in open cut and thought about u/g but thought for only $2 difference why go down.they preferred i stuck with open cut anyway. from what ive seen it looks like a very phsyical job and you would sleep well at night. what sites are available?

Link to comment
Share on other sites

Yeah dont worry I don't make big decisions from info on the net lol, after speaking to people that work underground seems if your with the right company at the right site its well worth it but as I am unsure where I would be located id prefer to stay on the surface.

Link to comment
Share on other sites

  • 4 months later...
  • 2 weeks later...

i work underground, what sort of offsider? we talking nipper or diamond drill offsider?

Diamond drilling mate. Eventually went underground and loved it but had a run in with supervisor lol.... now Im on the surface with another company. Would like to go back underground but as a nipper/truckie, as diamond drilling is crap haha

What site you at?

Link to comment
Share on other sites

  • 1 month later...

Aren't we all.

I missus' dad and mum both work in the resource industry

Mum is at perth mint gold refinery

And the dad is up on some three rivers site.

Only reason I haven't been able to work up there is due to not having any of the needed qualifications.

Link to comment
Share on other sites

is it possible to get a job on the mines without HR licence?? really keen to earn some decent coin

depends what you wanna do. if you want to drive trucks then prob not. but if your on the tools/driller etc then you should be ok. some places will organise cops to come to site when they have a group of people who need HR. maybe get HR learners permit to show your interested?

Link to comment
Share on other sites

 Share



  • Latest Posts

    • 5 minute job, at a NRMA branch. Not sure how easy it is in NZ for @R3N3 
    • Thanks. I was looking to book a tour to daikoku, not sure if anyone has done that before?
    • Well if you look at the compressor map I would say that the g35-900 will do it alot easier and be in a better efficiency range. In regard to throttle response and boost threshold, I doubt you would feel the difference but obviously there will be one. 
    • Unfortunately we ended up not quite getting to where I wanted alignment wise. Ideally I was targeting -3.5 to -3.8 camber as a good compromise for drift/grip/street. But due to the combination of custom configuration custom parts and the relationship between caster and camber (as you reduce camber you also reduce caster) on R32 we ended up at: Front Camber -4.5° Caster +7° Toe -4mm toe out each side. -8mm total Rear Camber -1.5° Toe 2mm in each side 4mm total in Perfect for drift but will be a touch too much camber for circuit. Thankfully the arms being modular means a change to one simple bracket will give me the adjustment I need to get to -3.7° camber and keep the caster at 7°.
    • Thanks @waxracing Turns out G30-770 T4 twin scroll 1.06a/r isn't available for reverse rotation. So really, the only real question is, will the G30-770 v-band .83a/r produce 500whp on pump gas? If it's unlikely, should I go to G30-770 1.01a/r, G30-900 .83a/r or G35-900 .83a/r? Or any other combination...
×
×
  • Create New...