Jump to content
SAU Community

Recommended Posts

jehahe thanks xrsist..

do you know anything about a squeaking noise when you turn on the car.. it makes this really high pitch squeaky sound a couple times after i turn on the ignition..

it made the sound abit before i got the clutch replaced.. but now after the new clutch it sounds worse

any idea?

Link to comment
https://www.sau.com.au/forums/topic/3576-clutch-helppp/#findComment-59678
Share on other sites

Or it could be because the mechanic forgot to grease the thrust bearing properly. Does it make a very faint squeaking noise on idle? If so, the see what happens when the clutch is pressed. If it stops, then thats your problem.

I currently have this problem, and its b/c the mechanic didnt do this when he replaced the clutch

Link to comment
https://www.sau.com.au/forums/topic/3576-clutch-helppp/#findComment-62612
Share on other sites

  • 2 months later...

MT90 is kind of a grade below Lightweight. I say "kind of" because none are really worse than the other, they're just used for different purposes. I'm running Heavyweight in my gearbox because I had a moderate case of the crunchies.

Nissanpower, as for helping preserve your clutch, probably the best thing you can do that doesn't adversely affect your performance is to heel-and-toe your downshifts. Depending on your driving style this may be the most wear and tear you can save on your clutch. On top of that it's also a lot of fun (esp around corners), and your passengers will be impressed if they know anything about driving :)

Link to comment
https://www.sau.com.au/forums/topic/3576-clutch-helppp/#findComment-98411
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It still combines inches with mm, especially when you have .5 inches involved, and mm and inches that can go in either direction. This would give a clear idea on both sides of the rim, right away, with no arithmetic. Even better if somebody gives you the dimensions of the arch of multiple cars. i.e GTR may be 125mm, a A80 Supra may be 117mm, or something along those lines. Yes, you can 'know' that going from a 10in rim to a 10.5in rim with the same offset moves both sides about 6mm, but you still have to 'know' that and do the math. Often it's combined. People are going from 9.5 +27 to 10.5 +15. You may do the math to know it, but if it was going from (I had to go look it up to be sure) 241mm/2 - 27 - 93.5mm from the center line to (more math) 266/2 - 15 (118mm) from the center line. Versus 93mm vs 118mm. It's right there. If you know you have a GTT with 100mm guards you can see right away that one is close to flush and the other absolutely won't work. And when someone says "Oh the GTR is 120mm" suddenly you see that the 10.5 +15 is about perfect. (or you go and buy rims with approximately 118mm outward guard space) I think it's safe to say that given one of the most common questions in all modified cars is "How do offsets work" and "How do I know if wheels will fit on my car" that this would be much simpler... Of course, nothing will really change and nobody is going to remanufacture wheels and ditch inches and offset based on this conversation :p We'll all go "18x9+30 will line up pretty close to the guards for a R34 GTT (84mm)" but 'pretty close' is still not really defined (it is now!) and if you really care you still have go measure. Yes it depends on camber and height and dynamic movement, but so do all wheels no matter what you measure it for.
    • But offsets are simple numbers. 8" wheel? Call it 200mm, near enough. +35 offset? OK, so that means the hub face is that far out from the wheel centreline. Which is 2s of mental arithmetic to get to 65mm to outer edge and 135mm to inner. It's hardly any more effort for any other wheel width or offset. As I said, I just close my eyes and can see a picture of the wheel when given the width and offset. That wouldn't help me trust that a marginal fitment would actually go in and clear everything, any more than the supposedly simple numbers you're talking about. I dunno. Maybe I just automatically do numbers.
    • Sure! But you at least have simple numbers instead of 8.5 inches +/mm, relative to your current rims you do maths with as well, and/or compare with OEM diameter, which you also need to know/research/confirm..
    • Uniclutch install vid, RB Track edition.   Highlight reel is very drive able, not noisy but still heavy with the clutch master he has.      
×
×
  • Create New...