Jump to content
SAU Community

Recommended Posts

Ok, sorry I must be missing something here. What offset did he say these things were?+20 or +30?

I had a quick squiz on the net, and could only findthose wheels in a 20x8.5 114.3 in a +35 offest. With a 120 PDC they come in a +20 or +40. Not saying there aren't more options, but thats all i could quickly find.

So, with a 20x8.5 +35, you will have 11mm less on the inner, and extend 1mm further out. No need for rolling or anything if it clears on the inside.

I'm sorry if i'm barking up the wrong tree, its late, but I just don't want him to be thinking he's going to be rolling guards/shaving wheels...:thumbsup:

yes you are correct............ changing from a 8" +30 to a 8.5" +35 is 1mm out :)

they come in +20, +30, +35, +40, +45

so i could get a 9.5" in a +45 if i can tuck an extra 34mm ROFL

by the looks of it my battery is pretty much cactus but what i would like to know is cos ive pulled the battery out overnight to charge it do i need to do the ecu reset proceedure again???

i got an RDO today so im gonna go install the plenum spacer :D

Bastard.

I was thinking about the plenum spacer on the way in to work (Yep, I sit on the bus and think about cars.. what of it) and wish I could better explain just what a difference it makes; its actually frustrating how Im not able to articulate what a difference it makes! Its a pretty straight forward install, the guys have explained/documented it really clearly - looking forward to seeing your response once its in :thumbsup:

Theo, the spacer is not the wrong one.

It was cut from the same template as all the other spacers that have been installed.

As I said in my PM, it only goes on one way, so try flipping it over or switching ends.

Theo, the spacer is not the wrong one.

It was cut from the same template as all the other spacers that have been installed.

As I said in my PM, it only goes on one way, so try flipping it over or switching ends.

FARK!!!!! yeah my mistake....... thought i tryed it all 4 ways HAHA

looking forward to seeing your response once its in :thumbsup:

ok what i noticed when i put the exhaust on it got very peaky/strong but once i fitted the spacer it brought it back down to a more smooth liniar pull as it was before, also it doesnt drop down a gear as quickly if u deside to punch it.

other than that i thought the exhaust note has changed slightly

ok what i noticed when i put the exhaust on it got very peaky/strong but once i fitted the spacer it brought it back down to a more smooth liniar pull as it was before, also it doesnt drop down a gear as quickly if u deside to punch it.

other than that i thought the exhaust note has changed slightly

Bingo!

Exactly what I found, don't need to lean on it as hard to get the same performance either. You'll likely see a slight improvement in economy; once the novelty wears off...:ph34r:

my coilovers turned up today so far only managed to get the fronts in, i'll finish it tomorrow and see how it sits but its looking rather low atm....... its about 50mm lowered, might have to bring it back up a bit :ph34r:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • In a few years from now, you'll regret that. It'll eat away at you, knowing the truth of the ugly hiding beneath the beautiful exterior... 😛
    • I don't think the G2 profile is particularly dangerous for the engine per se, more just are you actually ok with the turbo lag trade-offs? If the answer is yes then go for it. I personally don't think I'd be ok with it because I spend so much time at lower RPMs and I really enjoy the feeling of being able to stay in 5th gear on the highway and just roll into the throttle to get boost. Or staying in 3rd gear on "gentle canyon cruises" without feeling the turbo lag too badly. The 525 pump should be able to run flat out on factory lines but I would bet the pressure drop from pump to regulator is quite impressive. I don't know how much it would be exactly but I've seen figures like 30 psi thrown around.
    • It's interesting seeing everyone talk about what level of risk they are happy to tolerate.  Building a GTR always has a level of risk, you could be that lucky guy that drops 20k on the engine build alone and still has the thing go pop on the dyno. Life is fun like that.  The way I see it, the thing is a toy to be enjoyed. I'd be happy to turn up the power on stock motor and limit the risk with sensible tuning and engine protection. If it still goes pop, it is what it is. The car isn't a daily driver so it can happily sit while a plan is made to sort it out.  Given this thing will be a street car only, I really feel it's worth the (relatively small if managed well) risk to turn the power up to around 350KW on e85.  I don't think anyone getting into the skyline game now is doing it out of logic. Surely it is a purely emotional decision so I'm not sure how important it is to think about the engine build logically. The heart wants what it wants.  @joshuaho96 little note for Josh, I run my 525 pump flat out all the time and through the factory lines without any issues. (excluding the melting connectors, that's sorted now. we'll pretend it never happened lol)
    • But the Nexus S3 is very expensive and won't be as purpose-built for the application as a separate electronic boost controller :^) More seriously my pet issue here would be that the Walbro 525 running at 100% duty cycle is going to require more FPR than the stock setup can handle. I'm also pretty sure from what I've seen elsewhere you might want to slow down the pump regardless unless you're going to come up with some way of upsizing the fuel lines coming from the fuel tank. Factory 8mm fuel line doesn't actually flow very much if you want to keep pressure drop down between the fuel pump outlet and FPR. If you really want to "keep it simple" I would run only as much pump as you need and source a fuel pump controller to slow down the pump in the vain hope of being able to run stock-style FPRs which are pretty dinky. Or just use the HICAS lines and it should be mostly fine. OP should also really think hard about what profile they'd want out of the turbo. My pet choice here would be the G1 profile rather than anything higher power but YMMV. I already think ~stock turbo lag is pretty bad so I don't want to make it worse. In "gentle canyon cruising" I found that I spent a lot of time around 4-4.5k RPM. I also recommend DIYing labor if you're detail-oriented enough. Costs are high for labor + if you do it yourself you can be your own quality control.
    • GTSBoy is again on the money. My actual advice? Sell the car. (really). For what it's worth as is, you can sidegrade into something much better. If you care about function then this is the actual move. If you want a Skyline to perform, set aside about $100K to do it. This is NOT a typo. You will see right away these are two very different mindsets. Realistically we're talking full restomod for any Skyline still kicking around. Have an honest think about which one you are.. and what you want to do, and how much you want to invest in this (with no return).
×
×
  • Create New...