Jump to content
SAU Community

Recommended Posts

Like the title states has anyone chosen the 300zx as a drift car and has been successful? Has it been a reliable vehicle free from hassles,

easy to mod with parts readily available online and no need for custom this and custom that? As a drift car what are peoples thoughts

can anyone give me details on the pro's and con's of this car as a sustainable drift car?

I know there is a 300zx drift car setup by sureflo there was one guy in the D1 with a yellow 300zx on youtube.

Only reason im asking is im sick of seeing 180's and silvia's on the track i personally drive and drift a R33 and i love it, just wanted to know the differences.

Cheers, Jace

Link to comment
https://www.sau.com.au/forums/topic/357916-300zx-drift-car/
Share on other sites

Alot of people complain about the R33's being able to spin out easily.... I find it's pretty hard for the R33 to lose rear end grip compared to a silvia/180/R32 and drifts being hard to sustain in a lower powered R33 GTS-T. However I have noticed once the LSD kicks in properly and your laying down power on both wheels I am confident on taking the R33 sideways without much of spinning out. I guess it comes down to the driver.

I have driven a TT Z32 and you can feel the weight of it. The poor 3L needs those turbos! I have alot less confidence in chucking that thing around compared to my R33... ALOT less. Weighing alot it would need full suspension, engine, hydraulic handbrake etc. And at the end of the day the VG30DETT is a prick of an engine to work on in a 300ZX engine bay. How many 33 drift cars do you see!!! They are all silvia/180/R32's!

My 2c

Link to comment
https://www.sau.com.au/forums/topic/357916-300zx-drift-car/#findComment-5720296
Share on other sites

If you have any friends witt a twin turbo 300zx ask them if you can look at the engine bay. U will see issue number one... They are a pain in the ass to work on.

Issue number two IMHO would be that while the vg30dett does produce some good power and more torque it is offset by the fact the car its self is a bit heavier.

And I imagine the after market support for z32 may not be as great as for skyline and silvia

Link to comment
https://www.sau.com.au/forums/topic/357916-300zx-drift-car/#findComment-5720443
Share on other sites

I guess it is true the tracks a riddled with 180's and silvia's and R32's, there really isnt any R33's as a drift car kinda why i chose it, its something different

to look at, as for the engine bay of the 300zx i have seen the vg30dett in person and was very surprised that there was no F##KING room to work

around, as for the mod support i guess it would be less then the R33.

My R33 GTS-T is currently running the standard lsd and i dont really find it hard to spin out but would a proper 1.5 or 2.0 way be better?

Link to comment
https://www.sau.com.au/forums/topic/357916-300zx-drift-car/#findComment-5720566
Share on other sites

Drifting isnt about being different... The only reason said cars are more popular is they are piss easy to work on and theres a gazillion parts out there for them.

The only flaw imo with 300 is the engine bay space. If you where going to use it for drifting/racing you could lose a lot of weight by stripping it and fibre glassed panels etc.

Also the overheating problem would be easily addressed.

I cant remember what parts but there is interchangeable from other nissan that fit 300's, might be good to check out some 300zx forums.

If I was going to use one for track one of the first power mods Id be doing would be to convert it to single turbo, will free up a bit of space and reduce engine bay temperatures slightly.

Link to comment
https://www.sau.com.au/forums/topic/357916-300zx-drift-car/#findComment-5727684
Share on other sites

  • 3 weeks later...

I've owned a 300zx Twin Turbo for nearly three years now. They are a bit of a pain to work on but not impossible and I knew nothing about them before now I do all the work myself with the help of aus300zx.com theres also a few drift 300zx on there and many in the USA. I really gotta say it, there isnt an overheating problem with the 300zx, any 20yr old car without a maintained cooling system will overheat. Its not as if they were shipped from the factory with overheating problems. I've never gone over 85cdeg in a 21yr old TT 300zx and all I did was replace the cooling system, radiator, thermo, waterpump. Easy as. Theres a lot of aftermarket support check out conceptzperformance.com 300zx come in 2+2, 2+0 and hardtop varients also which would be better for drifting. Hope this was of some help. Thats mine below.

DSC00049.jpg

Link to comment
https://www.sau.com.au/forums/topic/357916-300zx-drift-car/#findComment-5763074
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sharing results from recent Liberty Walk R35 GTR, since they are still considered as somesort of a V36 Skyline. We do them turbos too. This are high flowed SS-1 models with ball bearing conversion done.  Car have managed to pull 485awkws @ 20Psi so far pushing limitations of factory built engine. The build list for R35 GTR enthusiasts as follow : HyperGear high flowed stock turbos in SS1 (G25-660 specs) Custom titanium intake pipes. Vspec performance titanium front pipes. Vspec performance 4" titanium exhaust. Upgrade fuel pumps. 1200cc injectors. Ignition coilpacks Hks intake plenum. Hks intercooler piping. Greddy intercooler. Greddy bovs. Top-secret coolant reservoir. Emtron ecu. Straight E85. Built gear box.  
    • Nah no bearings, just slip fit.  Would be a reasonably challenging but not impossible job to modify it to run bearings but I'm hoping that's not necessary as I may have well built one myself if I end up spending hours modifying it!
    • Brumbys with good shells are bloody expensive, I've looked at 2 "cheaper" cars, and walked away from both,  plus after some research spare parts are fairly sparce I'm starting to think that I missed the boat on finding a clean one that is straight (ish) and without alot rust I'm starting to think about a old Hilux as panels and other parts are much more available as they sold tens of thousands of them I use to be indecisive but now I'm not sure
    • A Brumby would probably fit a big metal toolbox in the back... this is how it begins  
    • Picked up a new OEM boot seal for the MX5 today as the old one got ripped a bit by me being a idiot by seeing if I could fit a large metal tool box in it, it didn't fit, and ripped the seal with the corner of the tool box I am still waiting on time to get the cams and new balancer installed, as well as the repairs to the boot Time will not be an issue soon though
×
×
  • Create New...