need help im confused

[bangin]

hey everyone i've got an r33 gtst and i got a cusco oil catch can and dunno where to block or hook up the hoses.there is the hose from the rocker cover to the inlet manifold, and another hose joining the 2 rocker covers together and one from the rocker cover to the inlet piping. which one do i hook up/ block off. i want to vent the can to atmosphere.wat if i wanted to return the oil, how do i hook that up . and theres a sensor right next to the throttle body some cars ive seen have this connected mine isnt wats the purpose of this sensor. any help would be useful. thanks in advance

[knore]

Whered u buy the catch can from?

I need one,

[51jay]

hey everyone i've got an r33 gtst and i got a cusco oil catch can and dunno where to block or hook up the hoses.there is the hose from the rocker cover to the inlet manifold, and another hose joining the 2 rocker covers together and one from the rocker cover to the inlet piping. which one do i hook up/ block off. i want to vent the can to atmosphere.wat if i wanted to return the oil, how do i hook that up . and theres a sensor right next to the throttle body some cars ive seen have this connected mine isnt wats the purpose of this sensor. any help would be useful. thanks in advance

Take off the hose from the rocker cover to the inlet piping, Replace it with hose from rocker cover to inlet of the Cusco. If you want to stay legal put a hose from outlet of the Cusco to the inlet piping. If you care not about legality don't put the last hose in. However if there is any oil atall going through the system it will very soon be all over your engine bay Leave all the other hoses alone.

I believe that sensor is inlet air temp ??

[bangin]

thanks 51jay

knore i got it for $180 and comes with 15 mm hose nuts n bolts brackets and even a cusco racing sticker cool eh. pm me if interested

[51jay]

Can you see inside it?? does the inlet pipe go down to the bottom of the can?? what does it use to help the oil condense out?? Stainless steel wire mesh inside the can??

[bangin]

i'll check it out and let you know it'll be hard cos its got two outlets for the hoses and a oil level thingy

[51jay]

i'll check it out and let you know it'll be hard cos its got two outlets for the hoses and a oil level thingy

http://members.optushome.com.au/jay51/Pod%...20can%20005.jpg

Link is to pic of a good quality catchcan that should actually work.

The inlet extends to the bottom of the can, the outlet is from the top.

Oil tainted air is admitted to the bottom of the can and exits from the top on the way up the wire mesh helps to condense out the oil.

You need to empty the can from time to time depending on how much oil you'r blowing through

[bangin]

man this cusco @#$$ doesnt have an inlet pipe that runs down and doesnt have a steel mesh or some sort of filter. what brand is the pic and wat if i use my cusco can without steel mesh wats gonna happen cos all i want the can to do iscatch the oil and preventing it going into the inlet

[51jay]

http://www.skylinesaustralia.com/forums/sh...32&page=2&pp=40

link is to middle of thread in for sale private, guys dad has them machined up ....expensive but a very classy bit of work.