Jump to content
SAU Community

Recommended Posts

  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

ok, guys it seems that there is more than enough interest for the lips. I am jsut sourcing a series 3 lip that is in good condition and i havnt forgotten about you prank.

If anybody would like to beat me to the punch and has a series 3 lip in good condition then let me know as the lucky person will get theirs for free!

I just had a very good email requesting the price of the carbon fibre lips.

In the original post I wrote that the lips would be $150 ea or $100 for 5 or more.

This price was for the fibre glass ones only

However the carbon fibre ones would be around twice the price. After checking the cost of materials The cost has been finalized to $300 each and $250 for 5 or more!

If anyone has any issues please contact me one way or another.

My appolagies if anyone has been mislead!

BJ,

As I understand it, if we have an order of 5 or more combined the Lips would cost...

$100 for Fibre Glass

$250 for Carbon Fibre

If that's the case... that's a very cheap price compared to UAS lip that sell the FB for $395 Can you please confirm.

YES, Mesh confirmed. as i said i am sorry to let anyone down, it is not my intention to mislead anyone. I re - read the post and realized that i had made a blunder. I know its not difficult to read but i became a bit careless with the details of the buy and focused on the posting rules so i didnt have to repost and loose momentum with the interest.

I think its a reasonable deal for you guys and you may too if you do a little research yourself. I'm not offering a charity, I'm in it to make a profit and you guys should be in it to take advantage of the services i can offer.

Let me break it down to you

Material costs $47.65 per square metre (carbon fibre) - full sq mtr used for 1 lip

resin costs $5.00

mould release wax $1.00

clean rags, paint brusshes etc small costs $6.00

about 6 hours to make one, about $15.00 per hour - not included in cost

Clear paint $60 per litre - 250 ml used per lip

Spray painter to paint, block and polish 6 coats, and polish between every two coats to give a superior product. $100

so the total is now mmm let me do it for you, cost for a carbon fibre lip is $174.65

so for 6 hours work and some orgaisational work i get 75.35 that gives me $12.55 per hour. do you work for less than $15.00 per hour?

I dont know what you guys do for a job, but working in the race car industry, makes you a perfectionist. I too have a nice car and help with advice where ever i can to those without much knowledge. I am not a businessman here trying to make a fast buck and I dont make crap products!!!!!!

$250 sounds reasonable to me.

how much more is the carbon kevlar?

i'm assuming the carbon fibre will shatter fairly easily when coming in contact with kerbs... is the carbon kevlar much stronger?

$250 sounds more reasonable than $300. You're up against genuine plastic lips that won't crack or shatter unless you pretty much smash the car. These can be bought 2nd hand (in perfect condition) for $400 (albeit not Series 3 design)...

And it's always hard to advertise one price and then suddenly double that price and not get customer dissention. It's human nature to feel ripped off and decieved.

The way I figured it was I was able to get the Series 3 style lip for $150, and if it cracked.... meh. Not a big deal... But now we're talking $250 for a lip that is quite liable to crack and shatter, it's still a bit harder to justify.

Just a bit of feedback from where I'm standing at the moment.

ph1: The carbon kevlar is again twice as expensive as the carbon fibre.

Merli: Ithankyou for being honest and feed back is nescessary for me to make something that will make your cars stand out and ofcourse add pride to your machine.

Just a short on the durability,

I have noticed that some may not be familiar with the durability of the materials on offer.

Fibre glass: The way in which the glass is layed and the amount of resin used determines flexability. If you request something to be very thick for example 8 to 10 mm thck then the likelyhood of it shatering is much greater. On the otherhand something very thin eg 2 to 4 mm thick is likely to flex alot but may tear so a happy medium between these two is what i try to achieve. If you damage the lip it can be repaired for $50 at most even if its in two bits. then ofcourse painting and re-fitting etc.

Carbon fibre: Is much more flexable and stronger (like 10 fold) in both aspects when applied with the happy medium aplication. but when fixed the repair will stand out like dogs balls because the criss cross pattern will be disturbed unless painted in a colour other than clear. It will still be smooth as a baby's but just the pattern will be disturbed.

Carbon kevlar is very similar to carbon fibre but twice as flexable and strong and also twice the price. It too will look ugly if a repair is needed unless painted in a colour other than clear.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Uncle Duncan Yeap, FI Interchiller  Works well, normal IAT's cruising with the WTA only went from 50°c+ to 25-30°c with the interchiller  Before, when on it hard, the IAT would see 80-90°c, now, the highest has been was around 38°c IIRC IAT is measured under the blower hat I recommend it for the street or strip where your only on it hard for 10 or so seconds, but it wouldn't be efficient for sustained track use as it would heat soak from the AC turning off or whatever it does during WOT to protect the compressor It really needs the AC running for it to not heat soak and keep the WTA coolant chilled My WTA coolant temps when just cruising is around 2°c
    • Hey Mark...sorry to interrupt your career change to hair dressing... but...did you ever fit the interchiller to the commodore, and if so how was it? And, who made it?
    • I've been pondering this, I really enjoy the convertible thing, for me, it's like riding a motorbike, without all the issue of riding a motorbike, mainly, my old sore arthritic joints getting beaten up, and, being able to do it in shorts and a T-shirt and not needing a helmet and all the other gear required, especially like wearing jackets and pants in the summer, or needing 6 layers of cloths in the winter, or not having wet weather gear handy when your 100km away from home on the bike when it decides to start raining As for the hard top and its Coupe look, whilst I do lose all that open top feeling that I really enjoy, from my experience with the NB with a detachable hard top, the cabin is a much nicer place to be, the difference in noise for one, a hard top quietens down the interior, alot, with the soft top up or down it's pretty noisy, which, after 5 or so hours, can get tiring But, as you stated, the detachable hard top totally changes the look of the car, in a really good way, and for me, the look of a detachable hard top is so much better than the PRHT which looks more like a after thought with its weird bulbous rear roof line For me, the minimal effort of putting in on, or storing it after removing it, is well worth the time and effort for the look alone And yes, I'm sure the next owner will be grateful for it as well.......  
    • I get into huffs with people when I suggest the MX5 looks so much better as a coupe than it does as convertible. Pretty sure I don't prefer the convertible version of anything. Good job on the hardtop! The next buyer will appreciate.
    • IMO wrap does have its uses, but like you said, quality wrap, and professional installation, would probably cost want a quality paint job does, but, the paint, if maintained, is basically for life, and much easier to touch up if required  In other news: it's pissing down here, with thunder, lightning and only some small hail "at this stage", luckily all "my" cars are undercover  I've also been contacted by a guy in Newcastle about the SS, he said he will come down next weekend for a look, we'll see how that transpires I guess 🫰
×
×
  • Create New...