Jump to content
SAU Community

Recommended Posts

hey,

Car: r33 GTS-T (5spd)

Mods:

HKS Super Drager exhuast

HKS SSQ Bov

Aftermarket Turbo (unknowen what type possible highflow, bigger than stock but not that much)

AirFilter + CAI

R34 GT-T Cooler

Bleed Value

Extra Heavy Duty Clutch ($900 or so)

Running @ .6bar

ok now that is out of the way, my question is, is it worth buying a ecu or should i just buy safc II for the time. I would like to make 300 to 350rwhp out of my car (my end goal) so i was thinking that ecu would be the better idea in the long run.

saying that i am unsure of which ecu to pick from, I live in perth and i know of a 2 good tuning houses which can tune Wolf3d and have had good reason (e.g. SST r32 gtr running 10second 1/4). But some people having being tellin me that Apexi PowerFc is the way 2 go but i dont know anyone who can tune it in perth :confused:

so i am very :confused: @ the moment

p.s after i pick ecu/safcII i will be buying a FMIC

Thanks Mike

edit: I have done a search and come up with general answer but would like some base on my car and it mods thanks

Link to comment
https://www.sau.com.au/forums/topic/35808-safc-ii-or-aftermarket-ecu/
Share on other sites

the reason people say power fc is that its plug an dplay and if you have epa problems you can jsut plug tour stock ecu in along with the other stock stuff.

power fc would be a good choice s-afc youwould spend your money twice. but would do the job .

the r34 cooler is bigger and more efficentthan the stock r33 one.

i thought the Wolf3D uses the factory sensors and is plug and play for the 33Ts.. Mikey, in the long run, the ECU would give u more control over the SAFCII in so many ways.. boost, timing, fuel, rotational idle, antilag etc as opposed to the SAFC which is basically a fuel computer..

the 34GTT core is thicker than the 33GTST stock cooler :P

i think you should get the FMIC in first, then have the ECU put in and tuned

Because you have asked this same question over and over and over again in the WA whoretown thread and I am sick and tired of giving you replies when you dont listen to the advice given.

rob, in whoretown it is not here or there, i just ask random , pointless question as the thread said it is whoring (i have stop that now). I now wanted info on ecu types and also befits on safc and ecu. im sorry but if u r sick and tired of me then just dont read my topics and reply in such a way that it is just a personal attack on me

rob, in whoretown it is not here or there, i just ask random , pointless question as the thread said it is whoring (i have stop that now). I now wanted info on ecu types and also befits on safc and ecu. im sorry but if u r sick and tired of me then just dont read my topics and reply in such a way that it is just a personal attack on me

So because its been said in whoretown it isnt valid? You need to get used to the fact that this is a forum and I can voice my own opinion.

ok after doing a search, on wolf3d i have come to the conuslion that it is the ecu for me, i just have a few question about stuff.

what is the knock snesor..? i read that u have 2 buy an add 4 wolf homuch does it cost?

and would it be wise 2 upgrade injectors and fuel pump after installing wolf?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not yet, might end up being easter now, didn't end up getting time off over xmas.    I've been seeing some concerning things online now too. Lots of people with issues, could all be setup issues but the consequences in some cases are significant.    All of the below are other peoples stories, not mine and are unverified.  Seen 2 x broken adapter ring that destroyed the gearbox as it failed.   They still do seem to have twin plate rattle despite claims of silent. Several issues with it not holding power but some evidence of constant pressure on plate. Setup issues with bite point.   Lot of people after 2-4 weeks swapping back to another brand.    On the positive side, I've seen a barra put down near 1000hp at the wheels and its held it.  Also everyone seems to confirm the pedal is light.    Does have me a little cautious and looking at ATS carbon clutches again .......        
    • I'm late to the party on this one but good to see common sense has prevailed and the turbo kit is coming. 
    • She's looking good Greg. Colour suits it perfectly 👍
    • I had a look at the FAB9 EFR kit, around $8500 AU before delivery, so add in shipping, installation, consumables and tuning, I believe the price difference would be negligible  And whilst I am paying top dollar at MX5 Mania, if I have any issues with the kit they are local for support,  and from my experience, will happily go out of their way to help, hell, I've purchased parts from them and asked "how do I install or remove parts" and they have fitted a few of them for free, this means more to me than saving a few thousand dollars And yes, 99% of the time I just plod around in the car, that may change once I start hearing turbo whooshy noises, but, as I have 3 family members is the constabulary, even when I'm up it, it is only up to the speed limit, or occasionally, but rarely, overtaking on the Hwy (I just plod in the left lane typically and enjoy the drive) Plus the kids would never let it go if I got booked speeding, Jackie is constantly getting critiqued by the kids about her driving, which I think is hilarious, and tell them that she is "bringing shame to our family", so heaven forbid if I ever got done speeding, after all my mouthing off about her driving, I would never live it down, and it would be another thing she would bring up any chance she got Like the time I got drunk about 15 years ago and fell out of a cab, which gets brought up at least a few times every year since it happened Good times
×
×
  • Create New...