Jump to content
SAU Community

Cold Air Feed?

scottish lad
 Share

Recommended Posts

scottish lad Contributor

scottish lad

Posted
Posted

Hi guys, i'v got an r33gts-t and currently have the standard air box with no snorkle as the fmic pipe doesnt allow it to go on. I was looking into getting a pod filter and maybe have a cold air feed??? Whats the best thing to do and is there a certain filter i should go with?

Any help would be great!

Cheers James

Link to comment
Share on other sites
PM-R33 Grand Master

PM-R33

Posted
Posted

I just have a pod filter inside of a custom aluminium box that I made with insulation padding on the inside of it.

On a forced induction car it aint a HUGE deal having no cold air intake if you have a decent front mount. Obviously it aint going to hurt though.

Link to comment
Share on other sites
krzysiu Grand Master

krzysiu

Posted
Posted

Do my intake setup IF you don't have a return flow cooler. Stock airbox (hacked up air feed to fit over cooler pipe. Put a hole in the bottom/side of the airbox. Put a duct from the airbox down through unused stock intercooler hole into front bar. Attach pod to the end of it. I have my guard liner in there too so cops can't see I have it so it's "legal" lol. Best way by far to do it. An you have 2 intakes :)

Link to comment
Share on other sites
scottish lad Contributor

scottish lad

Posted
  • Author
Posted

Do my intake setup IF you don't have a return flow cooler. Stock airbox (hacked up air feed to fit over cooler pipe. Put a hole in the bottom/side of the airbox. Put a duct from the airbox down through unused stock intercooler hole into front bar. Attach pod to the end of it. I have my guard liner in there too so cops can't see I have it so it's "legal" lol. Best way by far to do it. An you have 2 intakes :)

hehehe.i like this :)

Link to comment
Share on other sites
Get EPIC Rising Star

Get EPIC

Posted
Posted

Do my intake setup IF you don't have a return flow cooler. Stock airbox (hacked up air feed to fit over cooler pipe. Put a hole in the bottom/side of the airbox. Put a duct from the airbox down through unused stock intercooler hole into front bar. Attach pod to the end of it. I have my guard liner in there too so cops can't see I have it so it's "legal" lol. Best way by far to do it. An you have 2 intakes :)

hey mate, which part of the bottom side of the air box did you cut out? Can you draw a rough pic or take a pic of your air box for us?Cheers

Link to comment
Share on other sites
krzysiu Grand Master

krzysiu

Posted
Posted

hey mate, which part of the bottom side of the air box did you cut out? Can you draw a rough pic or take a pic of your air box for us?Cheers

I can try take pics mate. But it's in the car in a way that you can't tell it's there. I'll take a pic from the inside of the airbox and post it up tonight/tomorrow

Link to comment
Share on other sites
Get EPIC Rising Star

Get EPIC

Posted
Posted

Do my intake setup IF you don't have a return flow cooler. Stock airbox (hacked up air feed to fit over cooler pipe. Put a hole in the bottom/side of the airbox. Put a duct from the airbox down through unused stock intercooler hole into front bar. Attach pod to the end of it. I have my guard liner in there too so cops can't see I have it so it's "legal" lol. Best way by far to do it. An you have 2 intakes :)

Just did this mod to my stock air box today. Pretty happy with it.Cheers

Link to comment
Share on other sites
itshimdazza Rising Star

itshimdazza

Posted
Posted

save all the hassles with a 2 inlet mod restrictions and cut the snorkle around your intercooler pipe. at least you wont get any heat soke with a pod...

I just marked out the snorkle ovel the pipe and used a jigsaw then glued on some "Bunnings house flashing" (like soft alluminum)..

pic below. very easy and near stock....

mind you i did have to reglue it at the rear as I was impatient and installed it while wet...fixed now though

Regards,

dazza

post-65596-0-85377400-1300797197_thumb.jpg

post-65596-0-75903600-1300797210_thumb.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Stivo
      R32 goes out in right curves

      By Stivo · Posted

      That's true. However, this problem has started since the tuning. First time with the return journey from the tuning. But yes, the pipe was clogged with dirt and rust. That was certainly due to age
    • Dose Pipe Sutututu
      CD009 RB Conversion

      By Dose Pipe Sutututu · Posted

      Great info @tidi0x  Will definitely be handy for others and maybe me if I decide to keep the shit box H pattern.
    • tidi0x
      CD009 RB Conversion

      By tidi0x · Posted

      Bumping this up one last time.... I wanted to follow up on the clutch slave issue. I realized that what the issue comes down to is the pocket is flat milled, and the cylinder does not want rest flat. So in order to mount it correctly you will need to make a spacer for the fingers so the cylinder is floating. I took two plates of aluminum, drilled some holes and was good. I did still need to make the relief cuts in the bell housing, as even with the spacer the bleed section still interferes. The OE bell housing the mounting holes are raised from the housing.       
    • robbo_rb180
      R32 Gtst - Track Car

      By robbo_rb180 · Posted

      If the event in USA goes ahead will be interesting as it seems the rules will get more cars over here. Apparently the track is laguna seca too. Yeah s15, if I get a the lower dash trims, centre console and change front cross member to standard LCA position will fit clubsprint. See how rules are as i would rather do complete widebody than a bolt on flare to run the 295 with proper clearance.
    • 180 wanabe
      370gt Stock Suspension

      By 180 wanabe · Posted

      If the car is legal height I can't see it being an issue. Found a thread on reddit that might offer some insight.   I got a ticket from a copper in QLD for my S15 being too low. They had this wheel thing on a stick that they put under the car and it hit my exhaust. Anyhow went to an exhaust shop to get the exhaust tucked up/hung a little higher and I wound the coilovers up a smidge. Don't think I even had to go back to the police station unlike when I got defected for having a carbon bonnet when I brought the S15 from the ACT to QLD and had to replace it and then rock up at a police station and have a yougish female officer who knew nothing about cars confirm that I had changed bonnets. Should have just painted the carbon bonnet yellow to match the rest of the car lol
×
×
  • Create New...