Jump to content
SAU Community

Recommended Posts

First and foremost I wish to extend my condolences to the people of Japan. I don't have an economics or commerce background so I need some answers from some one who may have a better insight into the matter.

The question I have is exactly how much will these incidents affect import cost and import quality. I would imagine that a number of import vehicles would have been damaged but that's just going on presumptions.

Prior to the disasters, we where buying approximately 82-3 Yen for every $AUD, several days after the incidents we dropped to 73 from memory and now we are back up at about 80. I recognise the fact that a lot of Japanese investors are pulling out from overseas markets and backing up their economy, in saying this what will the ultimate result be say in 3 months time?

Edited by PSI-FED
  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

Hi PSI

to answer a few questions you have i would say the exchange rate has always been a major factor in exporting to Australia so i don't think much has changes as you just need to allow for this as a factor for importing. so yes it does impact the costs to a certain degree, but all leading importers always factor this into account.

As for Quality goes nothing changes any vehicle that have been flood effected get a certain rating usually grade 1 from auctions if the make it that far and really most cars affected will go straight to recycling plants as most of you would have seen the amount of damage to these cars on TV they are completely wrecked. Also the effected communities are not the types of places that you would see many performance vehicles or such as they are fishing villages and or small farming areas. finding a flood effected vehicle in the market for Australia i would assume is fairly well protected and if you are using buyers in japan that you have had long standing relations or know of many that have held high reputations should easily provide the information on any vehicle that has been involved in such floods or tsumami effected areas. also these areas are not normally areas exporters buy from also but this does not mean vehicles from these location do not get exported or moved to large auctions in japan.

another reason you would not see so many tsunami effected vehicles at auction is the superstition that Japanese have with all things used and one of the biggest items is the bad luck passed on by previous vehicles owners. i myself have spent many times at recycling plants in northern Japan buying vehicles for parts i have seen so many things inside cars that would make you think why is that still inside the car ( IE Mobile phones, clothes nice , jackets , brief cases , many CDS , jewelry and other personal effects) these are left inside the cars because if the owners survive the accidents the believe that the bad luck should stay with the cars and just walk away not claiming anything from inside the cars once they are clear. funny as it sounds but true in many cases.

Ultimately at the end of the day yes it does effect us importing for us in some ways but i believe the negativity of this being in a bad way will not factor into exports for Australians in a major way. for those who have had dealings with reputable companies in japan or have someone who is in the know of who is good or not you should continue to use those companies. buying blind off any 1 unknown company in japan has always been a hit and miss and buyer beware.

SSS automotive one of the oldest and most established import businesses in aus. Joe and Geoff have been importing stuff from japan for a long time (like since the 90s). Joe also has what was one of, if not the first RB30 powered GTR in aus (over 10 years old now). it now has over 200,000kms on it! currently pumping out somewhere around 500kw atw. They both travel to japan frequently and Joe has spent years living there buying cars and parts and shipping them back. They have their own house, and big workshop and yard in japan. I really hope their stuff is ok. Both are great guys and work bloody hard for their money.

http://www.sssautomotive.com.au/

That's Sad news :( as is anybody affected by it...

I was once asking for some part for a cefiro when I was younger and dumber... someone told me "SSS have heaps of cefiro handcuts right now!!"

So I was like oh sweet!!

So I jumped straight in my car and drove to SSS auto up the street from me....

http://www.sssauto.com.au/index.htm

...not the same shop

yeah not the same guys. SSS in sydney have been supplying bits all over aus since the aus import scene was in it's infancy. as I said Joe imported his R32 GTR back in the 90s and put a 3litre RB26 in it in the 90s too and ran masive tiwn high mount 2835s on it for around 400kw, with 6 speed box, big AP brakes etc and lots of cool touches. I think it had 30,000kms or something on it when he bought it and now has over 200,000. it's a very nice GTR still today.

yes.. it was an awkward moment for all when i walked into the reception area demanding to view their A31 cefiro halfcuts and saying that i was so hapy that someone local had a cefiro halfcut cos it was so hard to find parts for my car...

the owner comes out n he's like

...wtf is a cefiro. you mean a commodore?? we sell tail lights for your commodore...

my panel beater is waiting on parts from nissan japan to send over here so my car can finally be repaired but there are massive delays atm..the parts were ordered a couple of days before the tsunami hit so they hadnt been sent yet. has already been two months since the accident so little bit longer cant hurt compared to the suffering of other eople at the moment.

panel beater was saying that toyota and nissan are both shut down in japan at the moment

hope the news bout SSS turns out to be false, have got parts from there several times, really great guys

bad news for all concerned over there but any involved all over the world with any industry effected. i am tied up with uranium study and production and hearing all sort of negatives about the situation. regardless of that anyone remember what happen with the dunlop factory in Kobe when they had there problems there. took years for production to get up and running again. About 20% of solar panels that we use here in Aus are made in areas affected and will yet again takes years to catch up.

more important than all this is the loss of life and total loss of families.

yeah I checked about SSS last night. it's true unfortunately. and Geoff was over there at the time. he was lucky to get out when the quake hit but he said the yard is gone. :(

Given japan has bought back /repatriated a lot of its currency is thier currency going to get stronger?

This along with the supply available makes me think things out of Japan are going to be more expensive. Time will tell.

Japan currency wont get higher as the Japan Bank has poured billions of yen in to stop this happening.

If they hadnt you would have probably seen the Aussie dollar in the very low 70's if not lower and same for the US dollar against the yen right now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Because all parts that are put into your papers usually are assigned a badging if they did not come with one. So other people can just check that badging to tell if it is the parts your papes outline. But my pipe has NOTHING on it whatsoever. No idea why this even passed as a Mines pipe to begin with. I see this going two ways: -nobody cares and it's a non-issue, but that is unlikely -the pipe will just have to be assigned a bagding, for sake of argument, a Mines logo, and the papers corrected accordingly If it interests you I will post what the actual solution ended up being. All I care about is that it has to sound equal length and nobody can screw me later on because of a pipe being illegal.
    • The fasteners to the pipe are not subject to TÜV I guess, if we really start putting nuts and bolts through technical tests I'm going to hang the people responsible and then myself. Usually on a modern-ish EU normed car, you would just replace the pipe. Because if you start hacking away at it and welding new pieces on the cops will definitely find a reason to tow your car. That is just how it is sadly. On old cars and imports with no clear "standard" stuff like that won't matter too much. Most cops or inspectors probably won't even really know what they are looking at. But there is experts for this stuff even among cops, and some of them know the rules to a T and even have extensive knowledge about many vehicles. For "just a pipe" to be legal it usually is included in a set of parts, like a complete intake kit or a full exhaust. For example my exhaust needs to pass a noise test, meaning they have a standardized test track with a set of instructions and they run the car through there 3x for an average noise value that is 75dB(a) at point x of the test track. If it's above that, fail. For a turbo setup to be put in your papers you have to do dyno runs, emissions testing etc. So quite costly
    • Would this not be the same for the exhaust you've posted up?  If your exhaust volume and emissions are fine, why does the brand of pipe matter? 
    • The issue is more the fact that there is inspectors that deal with japanese cars a lot and they might know what a real Mines pipe looks like. And then they're gonna get antsy and not pass your car. But I'd have to talk to one of them about this, because you know as well as me that it's just a damn pipe and it effectively doesn't do anything. As I need to have my GT2860s and my exhaust setup (and the increase in HP) TÜV'd anyways maybe they can just correct the entry in the papers or assign a badge to the front pipe. I'm no expert either though, will inquire about this.     Thanks for the insight. Not sure if having a custom made pipe is good or not. Will find out in due time I suppose. Would be kind of funny if this was made in Germany though.
    • See this is a really tricky topic as technically the same rules apply to all cars but for cars but there is a difference. If you want to modify a car like the Skyline which never existed here you have a bit more freedom as they do not adhere to EU specs anyway. Any modification you do has to be in dividually checked anyway so as long as one of the inspectors think it's ok and within the TÜV ruleset you can get stuff like a top secret rear diffuser put in your papers. Which frankly would need a shitload of tests and certificates for EU spec cars, like a 2010 BMW M3 for example. But if you DO run these tests and all tests come out ok (safety stuff for the most part) there is no problem running such a part legally. It's just way too expensive to do for a single person on one car. The most touchy parts are emissions related mods, like an exhaust, turbos, air intakes. If it makes noise or alters the carbon emissions it's essentially illegal until you prove it's not. Meaning it doesn't exceed noise limits or have worse carbon emissions. I'd say for hoses if you replace them same same it doesn't matter what material they are or what brand you use. Same for nuts and bolts usually, they won't go and specifically check that your water hoses and some bolts are 100% OEM parts, that is nonsense.
×
×
  • Create New...