Jump to content
SAU Community

Recommended Posts

for a BNR32 a GTR 1993

need CV drive shaft boots for the front right side.

wondering if ya'll have some part numbers?

info relating to the figment for aftermarket boots, if they have gone on ok and worked well for long?

I am in the gold coast atm and back in south side of Brisbane each week. I know you'll say goto a CV shop or driveline shop ect. But I don't wanna be stuffed around, so please give me some business name?

cheers

N.

Link to comment
https://www.sau.com.au/forums/topic/358210-gtr-front-cv-boot/
Share on other sites

  • 2 weeks later...

ok

I was not up for the job being done by myself as the obvious stories of drivers side shaft removal hassles

got it performed my Coastal CV and Suspension at Burliegh in the Gold Coast.

I highly recommend them for the job and any other needs regarding suspension.

they replaced all the front cv boots of the gtr r32:

part numbers used are of driveline products:

1 * 93.121 = right hand inner

1 * 93.126 = left hand inner

2 * 93.053 = both outer boots

if you want consistency and professionalism, go to them and ask for chris, he did the work on mine

hope this help you all

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sane enough. Remove the roof liner, because the acid will go everywhere.
    • Thanks guys, I really appreciate the help and experienced opinions.  I have spent a lot of my life working on boats so I'm pretty good with fibreglass. I'll take everybody's advice in here;  I'll cut a little more of the 2nd layer away as it's a bit crunchy rust and also it's sitting high now. Then I'll wire brush it all a bit to get off anything loose, then I'll soak the bejesus out of it all in rust converter. I'll make sure to get a little hose piece and feed it into all the holes and gaps between the roof layers. Then I'll fibreglass up the holes.  Then I'll get a pallet of filler and mix it with 3 buckets of hardener and hope that is enough to build up the roof corner.  Does that sound sane? Is one type of filler better than others for this?
    • My goals for it atm are to get it registered, respray and some mild power gains eventually... I picked up the car from an elderly gentleman near the border of NSW and VIC, its honestly a bit rough and looks like its been driven on a farm (because there was so much dirt underneath). Last week I dropped the subframe and emptied the old fuel out + added a new fuel pump (think the old one went bad from old fuel). Now I'm onto fixing a coolant leak at the rear of the engine + adding a new radiator as the old one is corroded. After that i have a new bumper, coils (as the old were leaking) and lots more
    • Welcome buddy! Plenty on here and YouTube. What are your plans for it? Good luck with the Rwc and Rego bud!
    • Love this so much! Please post a photo when you have a bike on the trailer.  I was a little bit worried about having a tow bar on the Skyline, but having it hidden behind the number plate is genius
×
×
  • Create New...