Dash gauge pod 3x58mm & GReddy water temp gauge

[tridentt150v]

For months I couldn't get one, now I have two, so i'm selling one.

Dash gauge pod for SII skyline, made in fibreglass for 3x58mm gauges $200 20% to SAU

[tridentt150v]

water temp sensor, wiring and radiator hose $50 20% to SAU

I'll chuck in the old oil temp gauge, it is likely repairable.

Sorry blew my oil temp gauge on the weekend, so I have used my water temp gauge [they are the same gauge, only the sensors are different].

[tridentt150v]

bump

[tridentt150v]

bump

[GTS26DETT]

58mm Greddy water temp gauge, excellent condition, comes with sensor, wiring and radiator hose  $200  20% to SAU

I will give you $150 for the whole water temp gauge setup, COD to Sydney

[Guest INASNT]

where on the dash does it fit snug?

[tridentt150v]

To the left of the dash cluster, on the dash and back off the edge by about 2.5 cm.

The rolled up lip actually mates up with the hump of the gauge cluster.

[Guest INASNT]

in the pic is that just the unpainted fibreglass?

do u need to sand etc before u paint it?

[tridentt150v]

No, it is the finish. It is an imitation vinyl finish, sort of like on your dash, that dimpled type of texture. All you have to do is check yor mounting postion, cut the holes out for your gauges, and paint it the colour of your choice. A really simple job [i just did it with another one on my 'line].

You'll probably need a hole saw and a small grinding wheel to cut the holes out, and a can of vinyl spray paint. You may need either screws, double sided tape, or urethane [Wurths make a bloody good one that sets and holds well, used it heaps for veilside type kits].

[Guest INASNT]

have a pic of yours installed?

[tridentt150v]

No, but I'll get you one tomorrow if you want. I'm at work at the moment hehehe they don't know I check this site out [yet].

[Guest INASNT]

Everyone surfs at work, its a good way to kill time and stop bordem kicking in.

Anyway, post a pic please.

[tridentt150v]

No probs, I'll try to get you a maxi of the surface too.

[tridentt150v]

INASNT pm me with your email, and I'll send you high res pics [530KB X 5 pics].

[PranK]

trident - I am kinda keen on the gauge holder too - Can you email me pics of yours fitted too??

[email protected]

Thanks mate!

Oh, and why so much for a Series 2 ?

Christian

[blx]

Also interested in pics

blx AT tpg.com.au

(change the AT with @ - i am sick of spam...)

[knore]

Yeh im with prank.. $200?

Can u post pics ?

[tridentt150v]

blx and prank, pics sent, knore, I could if your really keen, but you will loose resolution, that is why I'm only emailing the extra photo's, let me know what you want to do.

I've posted a pic of mine fitted [well will today].

[PranK]

trident - why is it specifically for a series 2?

Christian

[tridentt150v]

I don't think it is, I think it will fit a SI, BUT I don't really know [maybe you can help here].

I'm in a town that has one skyline - mine, I can't check that sort of thing out.

I ordered it for a SII, and I know it fits a SII, so I stick to what I do know [which isn't much I gotta admit].