Jump to content
SAU Community

Recommended Posts

  • Replies 804
  • Created
  • Last Reply

Top Posters In This Topic

Well the guy at the import shop reckons that there's no Skyline/Silvia specific gearbox crossmembers but rather just the A, B and C types.

I took the C type off my car tonight and put on the B type that I bought and it bolted up perfectly (this came off an S14 SR20 manual). I looked at the A type at the shop and it looked identical to the C type.

Nice setup, what controller are you using?

SPAL FAN PWM V3 - http://www.spalusa.com/store/Main.aspx?p=itemdetail&item=FAN-PWM-V3

Best thermofan controller on the market. Tapped into the factory coolant water temp sensor and programmed it from there.

What brand of radiator is that Rekin?

ASI radiator off ebay. $200 cheapie. Had to get the drain valve retapped.

And the thermofans i got are Flex-a-lite 410

http://www.frsport.com/Flex-A-Lite-410-420-Dual-12-inch-Puller-Auto-Electric-Fans-2500-CFM_p_12555.html

Thinnest on the market (and expensive too >_< )

Flexalite_410_02.jpg

Here's a few newer Pic's of my Shitter R32 its far from perfect but its on its way up and thats the main thing! :)

With A friends TE37's that i borrowed for a wheekend while My wheels were being powdercoated (only pic in daylight)

R32WithTE37s.jpg

And then a couple with the P1's back on unfourtunitly havent got a chance to fit the factory side skirts and pods :( and havent been able to take any decent Pic's.

IMG_0138.jpg

R32Shitness.jpg

can any one email me a copy of the R32 GTR workshop manual, or more specifically diagrams of the intake side plumbing,

Whats your email Daniel? Also, did you have any luck with that filter?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • AFM looks to be a z32 The injectors maybe old Nismo 555cc The turbo tag when looked up seems to be a gt2871 , imagine it would have the bigger rear housing .82 all look like the mid 00's mods when he started building it up. Vac hose seems right but would need to see a diagram. Great work going up there and sorting it out, be a good club car for someone wanting a good reliable rig.  I know I would like to have it but no space and too many other race cars at the moment.
    • Heys guys I got a r32 gtst speedo is out by 10kph seems the faster I go the more it be out  just seeing if anyone else had to problem and knows how to fix it 
    • I can't agree. If we hadn't all been brought up with the noise caused by the inefficiency of an ICE, no-one would actually ask for all that. An EV is like any other car, it just goes better. 
    • 2 more things I have to work out Easy one first...can anyone describe how to pull the fuel pump and sender from a 33? I can feel there is some sort of mount and clips but don't have a manual and don't know the trick......if not I'll spend some quality time in the boot witha lighter tomorrow. Second question is harder.  He had changed the upper plenum to a plazmaman but clearly got to a point with the vacuum hoses where he said "f**k it, I'm going inside for a beer" and never came back to that job because it was a mess. Am I right to think that I need: 1. Pre throttle (16mm nipple on inlet) to AAC's main 20mm fitting as the main pre throttle feed 2. ACC has a second 13m outlet joined to that 20mm fitting which I think is the pre throttle air supply for the cold start valve? 3. Cold start valve's outlet fitting then goes to Plenum (to bypass throttle?) There is some adapter on the back of the ACC with 2 fittings (13mm and 10mm), do I run the 10mm through a 1 way valve to the Brake Booster (4) and the 13mm back to a 13mm nipple on the Plenum as the Idle control (5)? 6. Run a 6mm vacuum line from the Turbosmart BOV to the Plenum? 7. Run a 5mm vacuum line from the Fuel Pressure Reg to the Plenum? 8. Run a 5mm vacuum line from the Turbosmart Boost controller to the Plenum? (Wastegate already has a pre turbo pressure source running to the solenoid then the wastegate on the other side of the bay)  Any help appreciated, the GTR is quite different setup and while the Stagea also has FFP it is different again. (And no Dose, I'm not pissing it all off and putting a ethrottle on it....)
    • OK, onto some questions to try and speed up the process a little. Does anyone know what core this Garret is? I know it is a high flowed standard turbo but nothing else about it. Tag says OK 0169J - 446179-5032 Same question for the injectors, I don't know what they flow and ideally can work it out before it hits the dyno, they are a mustard yellow side feed
×
×
  • Create New...