Jump to content
SAU Community

Recommended Posts

Hi all. I have a leaking no 2 injector in my 32gtr and was wondering what the cause could be, I have already had the injectors out and re-co'd then I re-installed them taking care not to pinch the o-rings, however it still was leaking so i took them out again and changed the position of the injectors hoping to see if it was the actual injector which could have been the problem but it is still leaking from no 2. I'm out of ideas because there is no moving parts on the fuel rail.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/358763-rb26-fuel-rail/
Share on other sites

Nah see the issue here is that, I had leaking no 2 so i had them all reco'd and reinstalled no 2 started leaking again so I swapped all the positions of the injectors eg swapping no2 with no4 then today the spot where number 2 was (now with injector 4 in it) was leaking. So it cant be the injectors. :S

Link to comment
https://www.sau.com.au/forums/topic/358763-rb26-fuel-rail/#findComment-5731834
Share on other sites

Check the seat in the rail. Someone could have tried to get the injector out with a metal tool or something may have lined the inside. It should be smooth with not even a hair line scratch. The rubber will seal in a perfect O. If there is a slit, crack, scratch it could seep out from that end.

Wait is it top feed? I'm thinking of side fed here. It could be the same though, the rail sounds damaged to me. Check it for physical damage.

Link to comment
https://www.sau.com.au/forums/topic/358763-rb26-fuel-rail/#findComment-5731877
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...