Jump to content
SAU Community

Recommended Posts

Hey guys parting out my 33 slowly so here goes a few parts

33 FMIC kit, kit is 2 months old purchased from justjap, includes HPI piping kit with all original scilicone couplers ( x5 ) & clamps and a brand new cooling pro bar and plate 600x300x75 core, in the box from justjap. ( purchased the core im selling with the kit for another car but due to flip mounting my cooler against radiator i rather use a tube and fin design cooler so keeping the HPI core ). Intercooler piping fits very well and requires minimal cutting of clutch fan blades to fit

post-77457-0-64088100-1301458713_thumb.jpg

post-77457-0-10294100-1301458665_thumb.jpg

$300!

tomei brake master cylinder stopper

post-77457-0-08233500-1301460907_thumb.jpg

post-77457-0-61146100-1301460932_thumb.jpg

$60

RB25 exhaust manifold heat shield

post-77457-0-22617300-1301458617_thumb.jpg

$30

RB25 ( prob suits rb20 aswell ) turbo heatshield and bracket

post-77457-0-04138100-1301458526_thumb.jpg

$40

Oil catch can with drain plug.

post-77457-0-45499900-1301458473_thumb.jpg

$50

oem r33 radiator, good condition, very minimal bent fins

post-77457-0-77805200-1301458437_thumb.jpg

$50

Scilicone intake pipe suit R33 ( possibly fit others, not 100% sure? ) perfect condition, no tears or cracks with inlets for bov return / breather port.

post-77457-0-40233100-1301458823_thumb.jpg

$40

Oem front and dump pipe ( only dump pictured, front pipe is just standard aswell )

post-77457-0-56151900-1301458789_thumb.jpg

$40

oem green label r33 AFM. Good working order, mesh still intact front and back

post-77457-0-07892800-1301458862_thumb.jpg

$50

HKS filter with element all intact and good condition, includes coupler, 2 clamps and attatchment piece to join it to your AFM.

^ PIC ABOVE

$50

Or get the complete intake ( scilicone pipe, AFM + HKS pod ) for $110

Contact by Pm or 0416 129 811.

Nik

Edited by nik.

Scilicone intake pipe suit R33 ( possibly fit others, not 100% sure? ) perfect condition, no tears or cracks with inlets for bov return / breather port.

$SOLD

turbosmart 2stange boost controller with missle switch

$50

Also selling complete rear interior (including good condition seats, plastics, seatbelts, all bolts, buckles, washers, handles etc.)

$110

Complete r33 aircon, including cendensor, compressor, all AC lines, the little can ( everything from the engine bay)

$80

Front strut brace suit 33

$50

Rear strut brace suit 33

$50

monkey brace suit all car models

$80

Or get all 3, struts & monkey bar for $140!!

Edited by nik.

Hey mate I'll take the front pipe, dump pipe and front and rear strut brace if still for sale. Cheers let me know

Hey mate I'll take the front pipe, dump pipe and front and rear strut brace if still for sale. Cheers let me know

All still for sale man, PM sent!

  • 4 weeks later...

is the boost controller still for sale? and also the monkey bar?(what exactly is it?)

cheers

  • 2 weeks later...
  • 3 weeks later...

sorry havnt had an internet connection for a while. cooler still for sale, pm sent. cheers luke

boost controller is also still for sale, lhs headlight has also sold.

tomei BMC still here aswell. had 5 people tell me they will buy it ! so far... $60

RHS headlight, good condition, no cracks. top grill mount tab broken. $60.

Edited by nik.

lots of tyre kickers and lots of parts left!

complete standard rb25det package minus turbo from a s1 r33.

purchased and installed by justjap on 11/12/09 (1 year 6 months ago) and has since put 31,000km on the engine. I also have the purchase and install receipt from justjap.

includes throttle body, intake manifold, injectors, rail, reg, complete running motor with accessories; p/s, alternator, exhaust manifold, engine mounts, coilpacks and ignitor, loom and standard ECU. rb25 gearbox with no crunches, shifts nice and smooth, no issues. includes a short shifter, box mount, clutch slave cylinder, heavy duty clutch of some sort, will be inspected when engine is removed.

Engine runs fine with no issues, blows no smoke.

$2400 with everything

$1200 without gearbox

if any more info is required, can contact by pm or sms 0416 129 811.

located in wollongong.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 馃槀 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
  • Create New...