Jump to content
SAU Community

Recommended Posts

Hey guys parting out my 33 slowly so here goes a few parts

33 FMIC kit, kit is 2 months old purchased from justjap, includes HPI piping kit with all original scilicone couplers ( x5 ) & clamps and a brand new cooling pro bar and plate 600x300x75 core, in the box from justjap. ( purchased the core im selling with the kit for another car but due to flip mounting my cooler against radiator i rather use a tube and fin design cooler so keeping the HPI core ). Intercooler piping fits very well and requires minimal cutting of clutch fan blades to fit

post-77457-0-64088100-1301458713_thumb.jpg

post-77457-0-10294100-1301458665_thumb.jpg

$300!

tomei brake master cylinder stopper

post-77457-0-08233500-1301460907_thumb.jpg

post-77457-0-61146100-1301460932_thumb.jpg

$60

RB25 exhaust manifold heat shield

post-77457-0-22617300-1301458617_thumb.jpg

$30

RB25 ( prob suits rb20 aswell ) turbo heatshield and bracket

post-77457-0-04138100-1301458526_thumb.jpg

$40

Oil catch can with drain plug.

post-77457-0-45499900-1301458473_thumb.jpg

$50

oem r33 radiator, good condition, very minimal bent fins

post-77457-0-77805200-1301458437_thumb.jpg

$50

Scilicone intake pipe suit R33 ( possibly fit others, not 100% sure? ) perfect condition, no tears or cracks with inlets for bov return / breather port.

post-77457-0-40233100-1301458823_thumb.jpg

$40

Oem front and dump pipe ( only dump pictured, front pipe is just standard aswell )

post-77457-0-56151900-1301458789_thumb.jpg

$40

oem green label r33 AFM. Good working order, mesh still intact front and back

post-77457-0-07892800-1301458862_thumb.jpg

$50

HKS filter with element all intact and good condition, includes coupler, 2 clamps and attatchment piece to join it to your AFM.

^ PIC ABOVE

$50

Or get the complete intake ( scilicone pipe, AFM + HKS pod ) for $110

Contact by Pm or 0416 129 811.

Nik

Edited by nik.

Scilicone intake pipe suit R33 ( possibly fit others, not 100% sure? ) perfect condition, no tears or cracks with inlets for bov return / breather port.

$SOLD

turbosmart 2stange boost controller with missle switch

$50

Also selling complete rear interior (including good condition seats, plastics, seatbelts, all bolts, buckles, washers, handles etc.)

$110

Complete r33 aircon, including cendensor, compressor, all AC lines, the little can ( everything from the engine bay)

$80

Front strut brace suit 33

$50

Rear strut brace suit 33

$50

monkey brace suit all car models

$80

Or get all 3, struts & monkey bar for $140!!

Edited by nik.

Hey mate I'll take the front pipe, dump pipe and front and rear strut brace if still for sale. Cheers let me know

Hey mate I'll take the front pipe, dump pipe and front and rear strut brace if still for sale. Cheers let me know

All still for sale man, PM sent!

  • 4 weeks later...

is the boost controller still for sale? and also the monkey bar?(what exactly is it?)

cheers

  • 2 weeks later...
  • 3 weeks later...

sorry havnt had an internet connection for a while. cooler still for sale, pm sent. cheers luke

boost controller is also still for sale, lhs headlight has also sold.

tomei BMC still here aswell. had 5 people tell me they will buy it ! so far... $60

RHS headlight, good condition, no cracks. top grill mount tab broken. $60.

Edited by nik.

lots of tyre kickers and lots of parts left!

complete standard rb25det package minus turbo from a s1 r33.

purchased and installed by justjap on 11/12/09 (1 year 6 months ago) and has since put 31,000km on the engine. I also have the purchase and install receipt from justjap.

includes throttle body, intake manifold, injectors, rail, reg, complete running motor with accessories; p/s, alternator, exhaust manifold, engine mounts, coilpacks and ignitor, loom and standard ECU. rb25 gearbox with no crunches, shifts nice and smooth, no issues. includes a short shifter, box mount, clutch slave cylinder, heavy duty clutch of some sort, will be inspected when engine is removed.

Engine runs fine with no issues, blows no smoke.

$2400 with everything

$1200 without gearbox

if any more info is required, can contact by pm or sms 0416 129 811.

located in wollongong.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
    • Thanks Paul I reached out to Autotainment but they no longer work on JDM cars as the guy who used to do the work moved on and is no longer doing that kind of work. I am talking with Level Up Audio though.
×
×
  • Create New...