Jump to content
SAU Community

Recommended Posts

Hey guys parting out my 33 slowly so here goes a few parts

33 FMIC kit, kit is 2 months old purchased from justjap, includes HPI piping kit with all original scilicone couplers ( x5 ) & clamps and a brand new cooling pro bar and plate 600x300x75 core, in the box from justjap. ( purchased the core im selling with the kit for another car but due to flip mounting my cooler against radiator i rather use a tube and fin design cooler so keeping the HPI core ). Intercooler piping fits very well and requires minimal cutting of clutch fan blades to fit

post-77457-0-64088100-1301458713_thumb.jpg

post-77457-0-10294100-1301458665_thumb.jpg

$300!

tomei brake master cylinder stopper

post-77457-0-08233500-1301460907_thumb.jpg

post-77457-0-61146100-1301460932_thumb.jpg

$60

RB25 exhaust manifold heat shield

post-77457-0-22617300-1301458617_thumb.jpg

$30

RB25 ( prob suits rb20 aswell ) turbo heatshield and bracket

post-77457-0-04138100-1301458526_thumb.jpg

$40

Oil catch can with drain plug.

post-77457-0-45499900-1301458473_thumb.jpg

$50

oem r33 radiator, good condition, very minimal bent fins

post-77457-0-77805200-1301458437_thumb.jpg

$50

Scilicone intake pipe suit R33 ( possibly fit others, not 100% sure? ) perfect condition, no tears or cracks with inlets for bov return / breather port.

post-77457-0-40233100-1301458823_thumb.jpg

$40

Oem front and dump pipe ( only dump pictured, front pipe is just standard aswell )

post-77457-0-56151900-1301458789_thumb.jpg

$40

oem green label r33 AFM. Good working order, mesh still intact front and back

post-77457-0-07892800-1301458862_thumb.jpg

$50

HKS filter with element all intact and good condition, includes coupler, 2 clamps and attatchment piece to join it to your AFM.

^ PIC ABOVE

$50

Or get the complete intake ( scilicone pipe, AFM + HKS pod ) for $110

Contact by Pm or 0416 129 811.

Nik

Edited by nik.

Scilicone intake pipe suit R33 ( possibly fit others, not 100% sure? ) perfect condition, no tears or cracks with inlets for bov return / breather port.

$SOLD

turbosmart 2stange boost controller with missle switch

$50

Also selling complete rear interior (including good condition seats, plastics, seatbelts, all bolts, buckles, washers, handles etc.)

$110

Complete r33 aircon, including cendensor, compressor, all AC lines, the little can ( everything from the engine bay)

$80

Front strut brace suit 33

$50

Rear strut brace suit 33

$50

monkey brace suit all car models

$80

Or get all 3, struts & monkey bar for $140!!

Edited by nik.

Hey mate I'll take the front pipe, dump pipe and front and rear strut brace if still for sale. Cheers let me know

Hey mate I'll take the front pipe, dump pipe and front and rear strut brace if still for sale. Cheers let me know

All still for sale man, PM sent!

  • 4 weeks later...

is the boost controller still for sale? and also the monkey bar?(what exactly is it?)

cheers

  • 2 weeks later...
  • 3 weeks later...

sorry havnt had an internet connection for a while. cooler still for sale, pm sent. cheers luke

boost controller is also still for sale, lhs headlight has also sold.

tomei BMC still here aswell. had 5 people tell me they will buy it ! so far... $60

RHS headlight, good condition, no cracks. top grill mount tab broken. $60.

Edited by nik.

lots of tyre kickers and lots of parts left!

complete standard rb25det package minus turbo from a s1 r33.

purchased and installed by justjap on 11/12/09 (1 year 6 months ago) and has since put 31,000km on the engine. I also have the purchase and install receipt from justjap.

includes throttle body, intake manifold, injectors, rail, reg, complete running motor with accessories; p/s, alternator, exhaust manifold, engine mounts, coilpacks and ignitor, loom and standard ECU. rb25 gearbox with no crunches, shifts nice and smooth, no issues. includes a short shifter, box mount, clutch slave cylinder, heavy duty clutch of some sort, will be inspected when engine is removed.

Engine runs fine with no issues, blows no smoke.

$2400 with everything

$1200 without gearbox

if any more info is required, can contact by pm or sms 0416 129 811.

located in wollongong.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I haven’t taken them out of the cases yet    inside the box is this packaging which is pretty much like a massive blister pack 
    • Purchased a NC MX5 a while ago Basic suspension mods done, BC coils and Whiteline sway bars  New DBA calipers, discs and pads Added some 17 x 8 Konig Decagrams with 215/45 17 PS5's Added some typical NA bolt on's, i.e. full exhaust and intake  Added 0.5ltrs with a MZR2.5 swap, nice bump in torques  Found a detachable hard top which is locked in for a colour match with my local paint shop in Feb 25, this also includes some PDR as it has received a few love taps from parking in the local shops when in the hands of my Minister for War and Finances, me, I park nowhere near other cars and typically park on the street The little thing is awesome, I drive it everywhere, it handles like a dream whether I'm up it or just cruising  But now,  because I'm a idiot, I keep looking at turbo kits....... did I mention I'm a idiot Why is dose so appealing  All of the NA 2.5 glory, well.......until sometime in 2025 anyway....🤪  
    • I would not be surprised if you are the only person on earth that has the interest/desire to do that lol.  The Haltech base map is a really good starting point, the car will fire easily and drive very well, even on mild boost levels. To me, following your advice sounds like some sort of ancient Chinese water torcher lol (this is not an insult Josh, never change <3)
    • Those car show concepts from the 2000's and 2010's like the Floria and IDx were brilliant and should've gone ahead, at least one of them. But neither Honda nor Nissan are thinking about affordable performance any more, which is truly sad.  Even if Toyota's liquid hydrogen ICE development reaches the point where it's commercially viable and the infrastructure to support it, Honda/Nissan would have to wait until Toyota allow fee access to their patents to offer it with any smaller performance models they released to take advantage of it.  
    • A sporty manual RWD coupe with a IL4 Honda engine would only be a good thing I assume we won't see anything released for a few years though, unless informal talks and designs have been going on for a few years,  and due to the current, and future, emmisions and safety requirements, I assume anything "sporty" they would do would be at least some hybrid thingie And hopefully anything they are thinking of has nice lines, without lots of plastic and fake bits hanging off it like that horrendous FK8 that looked like it was designed by a 13 year old The other issue of course in the current market is cost, currently the type R is around $70k, a twin is around $50k Meh, I'm old and grumpy and would rather buy a older model car and waste my coin on that than buying anything currently available new  
×
×
  • Create New...