Jump to content
SAU Community

Recommended Posts

Hi to all..hoping you can help me out here,

Living in Thailand and a while ago i bought a VL Calais [imported apparently from NZ and had a RB20 engine original ]

Some time ago it was fitted with a later model engine which i believe is the RB20DE..[Not easy dealing with Thais as i dont speak to gooda Thai] but has ECCS and RB20 on front of engine???Am i right in presuming this is indeed the twin cam, because of ECCS? Please correct me if not.

Anyway car has run rough since i bought it, mostly breaking down under acceleration[ sort of starving] BUt if i manually select low gear and boot it , it takes off like a scalded cat!And revs out to redline easily.

Also using heaps of fuel when cruising even[ maybe 5 kpl...] Starts and idles well.

Recently tho the car starts and idles well, but as soon as i accelerate more than maybe 1/4 throttle it basically dies and even backfires a little, and if i back off i can slowly get up to speed but as soon as i accelerate a bit more or attempt to go up hill, it really bogs down and wont power on unless im using very small throttle.If i select first and boot it as before, it basically dies now.

Initially fitted new fuel pump and air filter and fuel filter as trial, but no effect really .Have been just puting up with it as it really is only a shopping trolley and not too concerned. Now a guy wants to buy it...if i fix it first...so here i am.

I was tinkering today and took off the cap on the air flow meter and found a copper plate thingo that had been soldered to the top of the electonics stuff..aha ithought . heres the problem..resoldered , but no change.[ maybe has shorted out the electrics?]

OK take the number of it and see if i can get a new one.The number comes up as being for a Maxima..22680=16V00...maybe this has been the problem all along?If so do you know the correct number for this model engine?Am i on the right track, do you think..if not please give me some much appreciated advice on what to do....apart from a big fire!

PS ....car is auto.

Thanks for any help....Mark

Link to comment
https://www.sau.com.au/forums/topic/359288-vl-calais/
Share on other sites

Hi mark....welcome! id say your post is better off in a diffrent section....im sure someone will move it sooner or later.....eccs refers to the efi system.....does it have spark plugs down the centre of the engine or are they offset to the intake side?

Link to comment
https://www.sau.com.au/forums/topic/359288-vl-calais/#findComment-5738578
Share on other sites

Hi mark....welcome! id say your post is better off in a diffrent section....im sure someone will move it sooner or later.....eccs refers to the efi system.....does it have spark plugs down the centre of the engine or are they offset to the intake side?

Yes i wasnt sure where to post it ..thanks...plugs are under a cover down the centre.....{twin cam give away..now i think about that point...

Link to comment
https://www.sau.com.au/forums/topic/359288-vl-calais/#findComment-5739028
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Damn, as someone who just glued the damn things in (very slightly askew but better) I wish I saw this, or someone made this. Would be worth linking this to Boosted International. They're always looking for product ideas and this is something they would likely make.
    • You know what, I'll double or nothing. Save your money, buy a V8 Manual Mustang in 2 years and have a more fun street car with better support and all that. I often tell people "if I could do it all again, I wouldn't". Sell your R34 GTT to someone, spend the 20k in difference between that and a 2018 Gen2 V8 Manual Mustang. I'll bet you will have the $ in your pocket by the time you spend the ~20K differential on mods and get them installed. Just planting this seed for future regrets. Blah blah, wisdom of people who would do it differently who are at the end of the road you are just starting on, etc. Car modding is often death by a thousand cuts as you wait to afford the next big mod. Imagine a 2 door Skyline with a 330KW N/A V8 Revving to 7500rpm like the RB25, with 315's all round.
    • Yes I'm going through a similar thing with my R33 with rust in seams due to dried out seam sealer cracking. After much research I settled on Penetrol. Read what it does and its done a bloody fantastic job for me. Pressure pack comes with a thin tube to get into hard to reach places.
×
×
  • Create New...