Jump to content
SAU Community

Recommended Posts

Hi guys,

Im looking into buying some gear from the US to take advantage of the dollar plus a new model that is not available in Australia yet.

Do I need to worry about customs or anything else I should look into before I send off close to $900?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/359340-buying-audio-gear-from-the-us/
Share on other sites

depends one who your buying from, you can get burned on shippping, and transshipping is voiding your warranty from day one.

if you fry it , you will have to ship it back to usa in most cases to the authorixed dealer. lots of dealers say they have rights to sell equipment but don't , which = no warranty and you spending a mint on shipping

but things like sounddeadener is so much cheaper even shipped it comes out way cheaper for the good stuff.and you won't need a warranty on that kinda stuff.

pm me the shop your considering and what gear, I know a lot of audio dealers in US or can find out for you if there dodgy or not .

also watch out for substitution clauses on items out of stock, they can sell you alpine, then ship a hifonics if the alpine is out of stock. if the prices/specs are similar .

don't buy any DVD players from USA or video items unless you can convert your items from NTSC to PAL . and the sat. systems don't work properly even with the right maps from OZ.tech issus pn some units.

and anything that uses household power(power supplies for car shows ), is prob not going to work here, usa is 110volts and only some items convert to this power with a switch/.

tell your shipper to split your order cost per box to less then 1k but charge your shipping based upon the total cost. it will save you duty and shipping costs.

they wont ship with "gift " on the customs invioce so dont bother asking them. goods from china direct will do that but not usa

the USA is in serious trouble with lots of biz failures so beware of "fly by night" dealers(.they disappear over night with your money, and CC details )

never wire transfer money to USA or anywhere for that matter, unless you know who it is on the other end , a reputable dealer won't ask you to wire money ever

ask them to charge your items the day you buy them, if the dollar slides overnight, which it can do the cost will jump , sometimes in your favour but not usaully

only ship registered mail, where you sign for the goods and insurance is mandatory , don't ship without it

don't fall for the fedex shipment, or overnight, the items will get here only as fast as a jet flies and fullfilment boxes them up. expect 5-9 days on most htings to OZ once shipped to major cities.

hope that helps..lol

My brother bought a fair bit of kicker gear from the US. Dirt cheap compared to here. The same monoblock 750wrms amp cost about $600 here he got it for $299 shipped.

supply and demand of the population and lots of people sell the same products so they have price wars all the time. the retail market is pretty cutthroat in USA on car audio,

but the installation is another storey, you get what you pay for. here in OZ and same in USA. most chain stores aren't going to give you a box designed for your gear, just one off the show room floor.

I had a boss a lot time ago (20 years ago) in usa who was on the verge of bankruptcy and so cheap that he asked us to solder the cut off wire bits together from past installs and use them for new alarms/radio installs etc. dodgy as hell. and you guested it he is out of biz now. . so use someone to install you know is going to be around more then a few years. .. might cost a tiny bit more but the quality of work is normally 1000 times better.

if they wont show you past work, walk away. they should be proud to show you jobs. and have passion in the 12v

and dont be afraid to buy local, ask for a discount you might just be suprised ? keeps oz in biz ???

my 2c worth of wisdom

Edited by sapphiregraphics
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah, if I need to fit people in a car I'll just use the Mrs car, the MX5 is perfect for what I need as a fun little sports car for fun on the street As for getting in and out of the MX5, I have no issues as I am a short arse who does lots of mobility training 🥷 If anything, I have been looking at Daihatsu Hi-Jets for a work hack, I helped one of my mates move some stuff with one recently that he picked up from Just Jap, it was a little ripper and plenty big enough for what we needed, it would also be super handy for me as I do alot of gardening, and plan on having some veggie patches and native gardens in the place I buy next year when I retire I did alot landscape gardening and growing veggies prior to my current job, and loved it, and that is a hobby that can keep me sane in my retirement, and as such, the little 300kg load capacity would be more than enough for what I need it to move around I have been looking at utes for just this purpose for a while now, and a near new 2024 Hi-Jet can be had for under $30k And I would rather look at a quirky little Hi-Jet than pretty much any other little ute, well, apart from a Brumby, I love the little Brumby, and weirdly have never owned one yet I was going to buy a heap of raffle tickets to try and win the Brumby that MCM built for Subaru Australia, but sadly I totally missed the raffle, I even filled in some form to be told when the raffle started so I could buy tickets, but to my dismay I was never contacted and found out I missed it when I was randomly googling Brumbys last year... #conspiracy  Maybe I should just buy a Brumby for a little "work hack".....LOL I use to be indecisive, but now I'm not sure
    • Well.... it's not just "de-oxygenating". If you do that you just have, most likely, ethane. So you still need to do a synthesis step to combine a number of ethanes/ethanols to make circa-8-chain hydrocarbons. And of course you don't want straight chain HCs, because n-octane actually has a negative octane rating (ie, it's worse even than the n-heptane which sets the zero on the octane scale!), so you have to do some tricky catalytic chemistry to synthesise branched HCs. That's all doable - but it doesn't come for free. And.... it starts with ethanol, which is an agricultural product, and there will almost certainly never be enough of that as a base stock to replace the liquid fuels that are in use. You really wouldn't want to be planning to be using any more ethanol for fuels than is currently already used (in E10, E85s, etc). And ideally you'd be looking to reduce such usage, as it is largely wasteful, particularly in the stupid-ole'US-of-A where the corn lobby has organised it so that it's actually primary production corn that is used to make a lot of the ethanol, not by-products and waste, like it is (mostly) elsewhere. So, what I said about needing free-ish energy probably still applies. True synth fuels would be made from H2 and CO2, in a near reversal of the combustion process. In fact, given that the H2 would be split from water first, it actually is a complete reversal of the combustion process. But...energy intensive. The human race burns something like 1 cubic MILE of crude oil, after it has been made into various fuels. Every year. That's a simply stupendous amount of energy. Just assume that the density is 900 kg/m3, and that the calorific value is 45 MJ/kg, then that is 165.9 x10^12 MJ of energy. Or more than 10^19 Joules. You get a maximum of 1 kJ/s per square meter solar radiation falling on the planet's surface, and so if you halve that for daylight, and halve it again for average weather (highly optimistic) and then take ~25% for the very best efficiency of solar panels, then you need about 85.7 billion square metres of solar panels to generate enough electricity to replace that liquid fuel energy consumption. Each panel is about 1m2. That's a rather large number of panels. We also burn about a cubic mile of coal. We also use hydroelectric power. We also use nuclear. We also use a number of other sources, both "renewable" and not. You can kind of ignore the renewable ones (except for hydro, because it will all end up getting subsumed into pumped hydro for storing other renewables, and so it won't be the standalone renewable that it originally was), so we end up needing a multiple of the ground area number that I just arrived at.
    • Corvette thread then? Don't say I didn't predict the future again. "I love the little MX5, I do, but I just want something a little easier to get in/out of, a little more cushy and some power would be nice - I miss the V8 Rumble... I found this clean red C5 for sale recently and..." I'll do you a great deal on the next step, which is one of those but you can fit people in it, too.
    • What about renewable diesel and/or gasoline? I see some projects spinning up like de-oxygenating ethanol to make drop-in compatible bio-gasoline especially in CA. I still think the future is EVs and we should've all gone full throttle on nuclear power after the 1973 oil crisis like France. Despite 15 years of work in CA to reduce the CO2 intensity of generation with renewables our electric grid is still far worse than even "low carbon" nuclear power. ICE is pretty cool when you aren't depending on the stupid thing to be practical and reliable and cheap as possible to get you to work every day. It's kind of like mechanical watches or vacuum tube amps.
    • I just rolled over "my" first 10k km in the MX5 Every time I go anywhere it always ends up in a adventure to look at houses and find some random country roads I've been on leave since early November but unfortunately need to go back to work on 19 January Luckily though I still have a fair chunk of leave left to burn until.... Not that I'm counting 😁
×
×
  • Create New...