Jump to content
SAU Community

32Gtr Aircon Issue

Simonster

By Simonster,
in General Maintenance

 Share

Recommended Posts

Simonster Proficient

Simonster

Posted
Posted

Ok, so my climate control works with no issues.

I've performed the aircon diagnostic, it's good, only get 23, water temp sensor. I have the workshop manual but for the life of me i can' t see it in my engine bay. What is it for, does it have anything to do with engine cooling or something else.

So here's the deal- my aircon is always on. Yep, even when i turn it off and nothing is displayed on the climate control, its on, if air blowing thru the vents, i can feel the very cold air.

In the engine bay, the compressor clutch is engaged and the aircon cooling fan is on- how the fcuk has that happened

Ive recently refitted my engine, so is it possible to "hardwire" compressor on with just the power wire, i thought it only had one power wire to it and all it did was switch the compressor on?

Any help is appreciated, as i'm out of idea's.

Link to comment
https://www.sau.com.au/forums/topic/359389-32gtr-aircon-issue/
Share on other sites
Simonster Proficient

Simonster

Posted
  • Author
Posted

Actually the aircon fan isn't always on. Its off when i first get into the car, but on arriving at my destination, its running when i pop the bonnet - strange one...

Can someone point out where the water temp sensor is, i can't make it out from the workshop manual?

Mayuri Krab Grand Master

Mayuri Krab

Posted
Posted

Actually the aircon fan isn't always on. Its off when i first get into the car, but on arriving at my destination, its running when i pop the bonnet - strange one...Can someone point out where the water temp sensor is, i can't make it out from the workshop manual?

You mean the little black fan in front?

From my observation, it only turns on when the engine is over a certain temperature AND when the A/C is on.

No idea on the other issues though, sorry.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      Yeah one of the first things I out in when I started having catch can filling up issues. Still prefer to empty 1-2 times a track day rather than every session
    • Lithium
      Compressor flow comparison table

      By Lithium · Posted

      You'll find this link is probably more useful  Performance Turbochargers - Garrett - G GT GTX GTW Series Turbo TBG G35 1150 map may not even get added to my list depending on how it looks, the G35 1050 already is a mixed bag for making the numbers you would expect from the compressor map due to mismatch - I don't know how another 10lb/min of compressor flow is going to make that any better.   I've left out others for similar reasons as it's already getting quite big.   In terms of Precision, provide me with legit compressor maps for them and I'll do my thing   I'll add some more of the newer Xona Rotor options are they're pretty boss, I'd take a 68mm Xona over a G35 "1150" any day of the week - or Precision for that matter.
    • Duncan
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By Duncan · Posted

      Ahh got it. Well maybe install a drain for the catch can somewhere down low and accessible like a wheel well too....
    • MBS206
      Help Understand GTT Boost Setup

      By MBS206 · Posted

      Before you blow your car up, have you checked you've made all the correct modifications to the wiring if you're still using the RB20DE loom?   Some things to look at: The pin used for the map sensor on the RB25DET, is the same pin used on the RB20DE for the Ring Gear Crankshaft Position Sensor, no idea what you've got it plugged into now. The turbo pressure control valve solenoid you're talking about on the RB25DET, the same pin is used for the Variable Air Intake Control Valve on the RB20DE.   The factory manual has the wiring pinouts in it for you to check everything. It also has the diagnostics process to read codes out. In addition, there's a great table that shows what sensors and what actuators not functioning will relate to which signals. And Nissan confirm the as everyone else has from experience, the Solenoid being disconnected won't cause a fuel cut. However, the turbo pressure sensor being missing / wrong, WILL cause a fuel cut. https://www.nicoclub.com/service-manual?fsm=Skyline%2FR34-Workshop-Manual-English.pdf
    • Butters
      Compressor flow comparison table

      By Butters · Posted

      I've been hunting info on the G Series II - this is best I have found so far(Link below). Still waiting on the G35-1150 comp map, kind of very keen   So how do we go about getting precision on that little table of yours ?   https://turbosbytm.com/sites/default/files/product/technical-info/Garrett-G-Series-II-Product_Flyer 25 30 35_1.pdf  
×
×
  • Create New...