Jump to content
SAU Community

Recommended Posts

Ok I just got word back from my ‘mole’ inside DoTaRS that there are some MAJOR changes planned for SEVS regarding vehicle emissions, and what’s worse, some of them will be retrospective and will apply to cars already complied!

1) Like the NZ import scheme, SEVS eligibility will soon be limited to cars that meet the Japanese ‘TA’ emissions scheme or later if they’re ex-Japan (that means no cars prior to about 2001 will be eligible for import). For the Skyline range, this will rule out all R32s, all R33s and virtually all R34s (did any R34s meet TA regs or were they all GF?), but V35 and V36 will still be ok. Evos prior to Evo 7 will be out. Supras will all be out. JZX100 Chasers will be canned, but JZX110s will be ok. US-built vehicles are not affected because their emissions regs are stricter than ours anyway.

2) Cars ALREADY imported under SEVS will be tracked down via NEVDIS (the national database for vehicle identification) and owners contacted. The plan is to make owners submit their vehicles for annual emissions inspections to ensure that their vehicles meet the regulations they were complied under. Cars complied under the old scheme prior to SEVS will be exempt, as will cars imported under the pre-’89 rule.

3) The plan is to move SEVS more in the green-car direction, so they will soon allow hybrid models of cars already sold here in Australia to be imported – for example, the Tarago is sold in Japan as the Estima Hybrid, that will be allowed for import.

Well there goes my business, unless I move to Nimbin and use the tree huggers as my new target market... :down:

Edited by Iron Chef
Link to comment
https://www.sau.com.au/forums/topic/359421-changes-to-sevs-in-the-pipeline/
Share on other sites

any ideas on timing for this chef? i.e. can we go import crazy now on pre 2001 cars until this is made official?

better be an april fools f**ker

If its true tho Rhys, will it be worth owning an import that you can modify only basically so it passes emissions once a year?

Well it is actually closer to the truth then an april fools joke, many submissions (LINK) have been put forward for a few years now including as below from the Australian Automobile Association about 3 year old max cars to be imported.

Then you have the current submission LINK of the NSW MTA (image below) that if you are not a dealer you should only be allowed to import one car a year (it was one car every 2 years).

Its coming that is guaranteed, just look at the changes to Pre 1989 model cars and Personal Imports.

post-5805-0-48794900-1301627171_thumb.jpg

post-5805-0-74203000-1301627846_thumb.jpg

For the record, PRIMO passed on a copy-and-paste of my info to my agent in Japan, and from there it went around the auctions like wildfire, till I got a panicked call from another agent I use in Tokyo asking what the hell was going on! Evidently April Fools isn't a big thing in Japan, making them all ripe for the picking haha

For the record, PRIMO passed on a copy-and-paste of my info to my agent in Japan, and from there it went around the auctions like wildfire, till I got a panicked call from another agent I use in Tokyo asking what the hell was going on! Evidently April Fools isn't a big thing in Japan, making them all ripe for the picking haha

sounds like you got a VERY STRONG bite out of it.

mind you ADR 79/02 is going to shake a few people. anything after 2008 ( I *think*) has to pass that one to gain entry.

as for the emmisions gag - like that one. reminded me of the drive by emmissions tests in california.

I think DoTaRS are taking a closer look at it Chris, particularly as Japan has changed its testing procedures for emissions in recent times to be more like what they do here.

The biggest issue is the cost of the test itself for late model cars, I've heard figures of $30-40K bandied about, which makes it bloody hard to recoup those costs without charging a crazy amount for compliance. Ideally, we want DoTaRS to recognise the Japanese testing procedures as being valid here, once that's done, it will be a matter of providing the Japanese emissions paperwork to pass, same as they do with cars from the US now.

Edited by Iron Chef

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good tips, will get on those tomorrow. When doing the maintenance I did move a few of those connectors around, and things that are old tend to not like moving around. (Like me).
    • Don't try it. It will be shit. Better chance of damaging the engine than gaining any knowledge about the old one. Maybe, but unlikely, especially if the O2 sensor is working. You can use NissDataScan to look at the stock ECU.   Cleaning the AFM is seldom necessary and seldom helps. The R35 coil & loom conversion should eliminate dud coils or plugs. But as you still have misses - look to the plug where the coil loom connects to the engine loom, and the CAS plug. Need quality connections there. Also look to injector plugs. And the AFM plug while you're at it. Also look to whether your injectors are clean and flowing evenly. Get them out and onto a testbench.
    • Good to know, I feel like I am in for a rollercoaster ride that looks like a sine wave. 
    • You'll fit right in. Acceptance is the first step.
    • Hey folks. I've been lurking and browsing the forum for a while, since I got into my head that I wanted a skyline. Having purchased an overpriced completely stock GTT, (only "mods" it has is HKS pod filter and catback) now that it became legal in the US, it was all glorious and sututu noises here and there. But then I wanted to do things right and went to do basic maintenance. After all the fluids, filters done, I did the spark plugs, that's when the problems started.. First the car started spluttering at around 4.5k RPM. Which I gapped down the new plugs and that solved the sputter there, but the car now always misfires at idle with pops when lifting off and shifting 2nd to 3rd. Similar to the issues in this recent thread. I've been banging my head against the wall, reading the threads here and trying suggestions for a couple months now, so decided to start this one to explain exactly what I tried and what is going on. The symptoms of the issue: Idle and low revs misfiring intermittently. You can hear the exhaust tone change and the shakes on the shifter knob. It happens frequently, but doesn't seem to have a rhythm to it. Pops when backing off throttle. It pops and or burbles almost feels like it spits fire when it pops. (Happens mostly in 3rd gear at around 2k RPM). When under load and after 6k RPM, it also pops when shifting from 2nd to 3rd. There's a ticking noise at around 2k RPM in 2nd gear going downhill, seems unrelated though but I am out of educated and downright dumb guesses. Not noticeable lack of power when putting the car into load. The attempted diagnosis and solutions: Unplugging coils when the car is running This did nothing to change the idling and tone shift for every cylinder. Checking the exhaust headers with thermometer They all are within what I'd say it is margin of error of the laser thermometer New spark plugs Tossed two new sets, copper, iridium and using the old ones, still misfiring, even re gapped to 0.8mm, still same thing. MAF cleaned with the "specific" spray cleaner No changes in the issues what so ever. Brand new loom and r35 coil conversion (was going to add the r35 coils anyway) car runs arguably better, still misfires, but seems like does less frequently. Placebo? Code 21 now being thrown, thanks nissan gods. Removed the CAS to check the shaft for play or anything. CAS seems all fine, nothing that indicates any issue, visually speaking. Things to attempted next: Ordered a new MAF (chinesium from Amazon, to be able to return regardless of result). Fuel with proper gas, maybe it is this California water that they sell as gas that is to blame? Plugin the link ECU and check the info using the built in base map. Go back to BMW and eat my rob bearing breakfast without milky oil mixture.   Do any of you have experienced anything like this or have any suggestion?
×
×
  • Create New...