Jump to content
SAU Community

Recommended Posts

I need to change my timing belt, and about to buy a kit, but i want to make sure it is the correct one for my car. apparently there are 3 different belts??

my car is a 1999 WGNC34 Series 2 (RB25DET Neo) does anyone know how many teeth are on the belt? 141 teeth or 133 teeth?

Dayco Timing Belt Kit - PART No: KTBA173

Cheers,

Chris.

Link to comment
https://www.sau.com.au/forums/topic/359479-c34-timing-belt/
Share on other sites

i just ordered this today

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=120704897237&ssPageName=STRK:MEWNX:IT#ht_1749wt_856

CHARGED said he ordered the same kit and it fitted up fine, the belt and pulleys are the same for all rb25's its the waterpump that varies and i think this waterpump is the slotted type (fits all models)

Link to comment
https://www.sau.com.au/forums/topic/359479-c34-timing-belt/#findComment-5741623
Share on other sites

Just had the world's worst with the 25G.

Recommend you put in a full kit with both pulleys. Also replace water pump, get one for a VL commonhore. Also replace all the ancillary belts. It may cost a bit but can save you heaps.

Link to comment
https://www.sau.com.au/forums/topic/359479-c34-timing-belt/#findComment-5741677
Share on other sites

thanks for the advice guys... the one you got Tom, sounds like the goods. Yeah i thought all the rb25 kits would be ok, just started second guessing it when i read the description of the one i was looking at

http://cgi.ebay.com.au/TIMING-BELT-KIT-NISSAN-LAUREL-SKYLINE-STAGEA-/140461661396?pt=AU_Car_Parts_Accessories&hash=item20b42adcd4

didn't even think about getting one from the US...and genuine too! it would be worth getting the kit with the water pump. i will send the guy a message and see if he has any more :)

Link to comment
https://www.sau.com.au/forums/topic/359479-c34-timing-belt/#findComment-5741774
Share on other sites

For what it's worth I used the dayco kit that comes with both pulleys and its been all good for 20,000 so far, definitely do the idler and tensioner at least, water pump should be good for 200,000 but it's up to you for your piece of mind I didn't.

Link to comment
https://www.sau.com.au/forums/topic/359479-c34-timing-belt/#findComment-5741856
Share on other sites

yeah, don't really need the water pump, but worth getting if only an extra $50 or so.....

I noticed in the dayco kit photo there is something sitting under one of the pulleys? not shown in the US ebay photo.... is it important ?

post-11630-0-96855000-1301884814_thumb.jpg

post-11630-0-52756700-1301884885_thumb.jpg

post-11630-0-37738700-1301884891_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/359479-c34-timing-belt/#findComment-5744629
Share on other sites

yeah not the black rubber rings... the thing one of the pulleys is sitting on... i think this could just be a generic stock photo.

Well i ended up ordering the kit from the US with the water pump. Not that i thought anything was wrong with the dayco kit. I just thought and extra $50 for a water pump and thermostat was a good deal, and with the car being 11 years old, it does not hurt to change them anyway :)

Link to comment
https://www.sau.com.au/forums/topic/359479-c34-timing-belt/#findComment-5746043
Share on other sites

Good choice to get the water pump. Afterfitting the belt kit someone (not me) overtensioned the W/P fan belt which overloaded the bearing, which shagged itself and the shaft snapped. The fan uniy went for a free flight under the bonnet and went thru the radiator. All very expensive.

Link to comment
https://www.sau.com.au/forums/topic/359479-c34-timing-belt/#findComment-5746174
Share on other sites

The "thing" in the photo you are reffering to, is the spring loaded tensioner unit that one of the pulleys is attached to the engine by. The other kit does have it, but it is shown inside the pulley, not seperate from it.

If it isnt supplied its no real issue any way as the spring unit is pretty indestructable, its the bearing that usually fails

(isnt it hugh? :laugh: )

Link to comment
https://www.sau.com.au/forums/topic/359479-c34-timing-belt/#findComment-5748221
Share on other sites

  • 2 weeks later...

quick update...

got my package from the US... prtty happy with it :) awesome value and all items were sealed in genuine packaging.

Fitting everything this weekend

Should i try and source any gaskets? or do I just use some sort of gasket goop?

post-11630-0-93636700-1303081561_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/359479-c34-timing-belt/#findComment-5766842
Share on other sites

FYI Guys,

I can get timing belt kits and water pumps for those interested.

All tensioners are NTN, seals are NOK and belts are gates (Japanease/American quality)

Our listings show that all the RB belts are the same, the tensioners vary from the 26 though.

Water pump is the same deal, can share from 20 to 25.

:thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/359479-c34-timing-belt/#findComment-5772906
Share on other sites

The "thing" in the photo you are reffering to, is the spring loaded tensioner unit that one of the pulleys is attached to the engine by. The other kit does have it, but it is shown inside the pulley, not seperate from it.

If it isnt supplied its no real issue any way as the spring unit is pretty indestructable, its the bearing that usually fails

(isnt it hugh? :laugh: )

Well yes and no I did the RS at 110k and there was no info like this around. We are talking 2006 Just did the belts. Have had no probs so far. Touch wood The 25g had the belt only replaced at 106k. The idler pulley failed at 153k. The water pump shaft broke the next day caus someone overtightened the fan belt.

Incidently as I said earlier, the VL water pump is the same as but is less expensive.

Link to comment
https://www.sau.com.au/forums/topic/359479-c34-timing-belt/#findComment-5773146
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Actually,  just remembered there should be info in the threads (somewhere) about swapping to a manual steering rack and deleting power steering all together. 
    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
×
×
  • Create New...