Jump to content
SAU Community

Recommended Posts

Hey guys,

I have used the power button quite a few times at the lights, and it seems that it shifts into gears a lot later allowing it to rev higher.

The snow button in my opinion is just so that at the lights you do not overspin the wheels when its raining

Could someone please confirm?Or is there another use for them?

Also what is the "plastic box" underneath the passenger side seat with the wiring coming in and out of it?

Link to comment
https://www.sau.com.au/forums/topic/359595-power-button/
Share on other sites

the power/snow selector has zero effect (that is noticeable at least) on my car. i was hoping that it would make the auto trans shift at double rate or something at least

would be nice if there was an official technical document that explains how things have been programmed (power/snow/tiptronic/etc)

Edited by Trick V35
Link to comment
https://www.sau.com.au/forums/topic/359595-power-button/#findComment-5743219
Share on other sites

the power/snow selector has zero effect (that is noticeable at least) on my car. i was hoping that it would make the auto trans shift at double rate or something at least

would be nice if there was an official technical document that explains how things have been programmed (power/snow/tiptronic/etc)

I've occasionally bumped mine onto snow by mistake, and it definitely has an effect! Throttle response is limited, ie can't take off quickly at all, no matter how hard down your foot is, and gear shifts take place at really low revs, maybe max 3K. Have to admit I haven't really tried it on the power setting yet though!

Link to comment
https://www.sau.com.au/forums/topic/359595-power-button/#findComment-5745705
Share on other sites

They buttons do what they say they are for

Snow makes the car very docile and from what iv read take off in 2nd gear. This is what you want when your in a snowy/icy road so your not wheel spinning at the slightest tap off the accelerator

Power holds the gears longer before it changes

Link to comment
https://www.sau.com.au/forums/topic/359595-power-button/#findComment-5746208
Share on other sites

They buttons do what they say they are for

Snow makes the car very docile and from what iv read take off in 2nd gear. This is what you want when your in a snowy/icy road so your not wheel spinning at the slightest tap off the accelerator

Power holds the gears longer before it changes

That is correct. :thumbsup:

For me, I use power setting when I am on a cruise, normal setting for daily driving, snow setting if it's raining heavily (My rear wheels spin like crazy on wet roads :P ).

Edited by VNS 24
Link to comment
https://www.sau.com.au/forums/topic/359595-power-button/#findComment-5746253
Share on other sites

Ok yep tested and came to the following conclusion

SNOW: makes accelerator / throttle opening ratio much less sensitive.

POWER: makes accelerator / throttle opening ratio slightly more sensitive.

Doesnt make any change if you switch while already accelerating.

But in either mode, put your foot to the floor and it still drives like in normal mode.

Link to comment
https://www.sau.com.au/forums/topic/359595-power-button/#findComment-5755262
Share on other sites

That is correct. :thumbsup:

For me, I use power setting when I am on a cruise, normal setting for daily driving, snow setting if it's raining heavily (My rear wheels spin like crazy on wet roads :P ).

why would you have the power button on for cruises? :)

Link to comment
https://www.sau.com.au/forums/topic/359595-power-button/#findComment-5755701
Share on other sites

why would you have the power button on for cruises? :)

Hi Roy, I want the car to feel more responsive when giving it abit go. So on power setting, I feel like I am pushing the car more than in normal driving.

Plus, I got to keep up with other turbo cars too. :P

Link to comment
https://www.sau.com.au/forums/topic/359595-power-button/#findComment-5755727
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The spray cans were in the "Kiln" room whilst I was preping the parts,  so probably around 2 hours to get them warmed up, the kiln room has 3 small ovens running at 100°c, 3 medium sized ovens running 100°c, and the large one I used running at 80°c, the room itself was about 28°c, I also spent a bit of time taping up the parts in the room as well, and by the time I was done I would assume that the parts were around that 28°c As for power, I expect a couple of Killerwasps up high would be achievable with the current mods, I'm still running the MZR 2.0 intake and throttle body, and there is a slight mismatch with the 2.0 intake (smaller) and 2.5 intake ports (larger) on the head, this intake is matched and specifically designed to fix this issue with the ports mismatch, the throttle body is also a couple of mm larger, OEM is 65mm, the Bosch is 68mm In the end it will look "prettier" than the molded plastic thing that is the OEM MZR 2.0 intake As for the LSD, it's the OEM Torsen which works fine for what I use the car for, plus, basically no maintenance apart from the occasional oil change
    • I was at Tunehouse in Marrickville (great team over there really know their VR's) , and I spotted this Very clean R35.  
    • Mate , I have the same issue right now with the exhaust noise , if you can tell me what your local guy did , I'll talk to my guys and see if they can do the same. Power is good but it just too loud when put it down. 
    • The other trick I've found with wrinkle black is to put the can in hot water for a bit to warm the paint up, and to pre-heat whatever you're painting. It'll be interesting to see if you pick up any power with the intake, following with interest. Got a proper lsd for this?
×
×
  • Create New...