Jump to content
SAU Community

Recommended Posts

Only need 3.5L or so in an R33. I bought a 3.78L container of Redline Heavy Weight Shock Proof Oil for about $100, and there's about 300ml left in the bottle. This oil is meant to be the best, I guess that's why it cost $100 :D

There's a bit of improvement in the shift feel. It now doesn't crunch going into 5th at all (used to do it every now and then), and when the oil has warmed up the whole box is a lot smoother. When cold though it can be a bit hard to shift into 1st or 2nd.

Apparently it will improve even more after a few weeks, I'd only had it in less than a week before I got rear-ended. I guess I won't see any improvement for another week or 2 after I get it back from the repair shop (and god knows when I'll get it back).

I dunno, the whole thing could just be a gimmick but I had a spare $100 and from the reports I read it was meant to preserve your gearbox more than any other oil so I thought I may as well get it. But if you see photos of a gearbox that has this oil in it, you can definitely see how it sticks to everything inside and lubricates it all properly.

Unless you have a major syncro problem then Light weight Shockproof will be good enough. I absolutely swear by it cos I was looking down the barrell of a $3k gearbox rebuild for the 3-4 upshift problem. 4Litres and $100 of LWSP oil later and problem solved. Ask Mikey, he drove the GTR before and after I sold it to him.

Also fixed a similar problem in my 300ZX TT DD.

Ken

I ordered mine from TTZ Performance in Melbourne and got it delivered. I emailed [email protected] who works there (or owns the shop, I dunno). You can also ring them up on 03 9842 7699. Talk with them to find out what level of crunchiness your gearbox is at and they will recommend light or heavy oil to go with it.

Read here - www.redlineoil.com

I use their Shockproof & 75W90 gear oil, both are excellent! Improvements have been noticeable over VMX80 & Motul. I've not tried their eng' oil but Motul 300V has been faultless so far so I won't be changing.

For a rough price guide (AUD) have a look here - www.gearbox-racing.com They're a local Adelaide performance g/box workshop who stock Redline.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hows your intake piping? Are you still running stock? Having in the stock AFM position would mean, if the BOV was shut/venting out, it'd create the almost stalling kind of effect right // "the rich pulse behaviour" due to MAF thinking air is flowing ? But this would be better than having the bov in the stock position + MAF on/just before cross over piping right?
    • Essentially, yes. Although I wouldn't put the AFM on the crossover pipe. I'd want to put it into what amounts to the correct size tube, which is more easily done in the intercooler pipework. I bought a mount tube for card stile AFM that replaces the stock AFM - although being a cheap AliExpress knockoff, it had not flange and I had to make and weld my own. But it is the same length and diameter as the stock RB AFM, goes on my airbox, etc etc. I don't have a sick enough rig to warrant anything different, and the swap will take 5 minutes (when I finally get around to it and the injectors & the dyno tune).
    • So to summarise, the best thing to do is to move recirc to between turbo and IC, and maf on the crossover pipe. Meaning I'd need a recirc flange, drill a hole in the piping on turbo outlet area. And drill hole on crossover to fit/weld maf sensor? Either that or put the MAF on the turbo inlet right?  Is an aftermarket recirc/blowoff valve recommended? Do currently have family in Japan so could probably bring something back with maybe a cheeky lil SuperAutobacs run?
    • Yep, so far most have said that it looks like corrosion on the wall from piston not moving. Which then has probably damaged the oil rings and caused those vertical marks. The longest the engine was still after the rebuild, was the winter of 2018 - 2019, plus the boat trip to Japan. When I shipped the car, it had normal gas in the tank but before that winter pause, it had E85 in tank.  In any case, even if either one of those was the cause, it happened close to 6 years ago and the car has been driven something like 30 000kms after the fact. Again, apart from the plugs and the dip stick, there is nothing in the way the car runs that would indicate what has been going on in the engine. I am going to consult a shop and ask their opinion, what would be the best approach. I do have some access to a garage I could use to diagnose further myself, but time is very restrictive. Might end up buying another engine that could be used while this one is being remedied. Without pulling the head, it will be impossible to find out if it needs another bore, but here's to hoping a hone would suffice.  Goddamnit, I would really have preferred this not happening.  
    • Boot is going to be replaced eventually. I just wire brushed what I could and rust converted. Then painted in rust kill primer. the spoiler also got repainted and plugs replaced on the ends. The under side of the bonnet is going to be black also, currently white. But red on the top side, same colour code as the silo to begin.
×
×
  • Create New...