Jump to content
SAU Community

Oil Filter Sandwich Plate

luvpsi

By luvpsi,
in Engines & Forced Induction

 Share

Recommended Posts

luvpsi Mentor

luvpsi

Posted
Posted

hey guys i dont know if this is in the correct section r31 nismoid feel free to move this if in wrong section bought a oil sandwich plate to fit my oil pressure sender off ebay however it does nothing but piss out oil no matter how tight i do it up. does anyone know where to get one that is not a china made one i dont want this problem again.

Link to comment
https://www.sau.com.au/forums/topic/360117-oil-filter-sandwich-plate/
Share on other sites
The Dan Grand Master

The Dan

Posted
Posted

Would help if we knew what sandwich plate you bought and what oil pressure sender it is.

My suggestion, if the thread appears to be ok, use loctite thread locker when you screw it in to seal the thread. But it will all depend on what parts are being used.

luvpsi Mentor

luvpsi

Posted
  • Author
Posted

so im not making another thread for a similar problem my tuner just told me there is a small dent in the sump and it could cause problems what do you guys think. im only running a standard rb25det with 10psi and a microtech ecu. i dont know if he is trying to take me for a ride but it is hard because i can not get down there to look at it myself due to my work hours. what are your thoughts

luvpsi Mentor

luvpsi

Posted
  • Author
Posted

lol small dent... if you saw the sump on one of my track car's you'd cringe... they can take a fair wack before hitting the pick up.

is the sender the correct thread for the sandwich plate? what brand? post pics!

thing is my tuner only wants to do a basic tune until i fix the dent in the sump because he reckons its going to cause problems however when i put the motor in i checked the sump and tiny dents didnt bother me i have seen some big dents in my time also being a engine rebuilder i just think he is trying to take me for a ride.

and with the sandwich plate its the main center stalk that its leaking around aparently not sure ill have to have a good look myself i think. i reckon maybe it was just a pinched oring or something

zoidbergmerc Mentor

zoidbergmerc

Posted
Posted

An "engine rebuilder" having trouble fitting a oil filter sandwich plate... hmmm....

I wouldn't use one personally, esp not an ebay one, heard too many horror stories about them failing and people dying.

JonnoHR31 Grand Master

JonnoHR31

Posted
Posted

the lowest part of my sump is dented in about 30-40mm on the whole bottom section, didnt even bother hitting it out when i had the sump off and motor apart, its fine. unless its blocking/breaking the pickup (you'd know by now as you'd have pressure problems) its fine

luvpsi Mentor

luvpsi

Posted
  • Author
Posted

thing is im not looking at drifting or tracking it and im only looking at running 300rwkw down the track. and its only going to really be street and maybe a bit of strip use so i cant justify spending that money on a sump when i got a spare sump laying around. also the tuner just tuned my car and has had no oil pressure issues so i dont even know if its worth changing it but to be on the safe side i might change it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • DraftySquash
      WTB: R34 S2 Front grill (this guy is asking mental prices)

      By DraftySquash · Posted

      Looking for a S2 front grill for an R34 GT/GTT Doesn’t have to be in excellent condition as I’m looking to paint it. Would preferred if the clips were around.    The $500 this marketplace guy is asking sounds ridiculous in my opinion. 
    • MBS206
      My BMW 335i

      By MBS206 · Posted

      Nah, just take the other one off too 
    • Milkmun
      My BMW 335i

      By Milkmun · Posted

      A mini mini-gun.
    • Dose Pipe Sutututu
      R34 GTT idle problem

      By Dose Pipe Sutututu · Posted

      Oh yeah forgot to also mention need to also unplug the IACV as well. Thanks for the reminder @MBS206 Unplugging the TPS takes it out of closed loop so you're able to screw down the IACV without the ECU trying to add/subtract timing to maintain the idle (not sure PowerFC can even do this, but Nistune and the OEM definitely does)
    • Bman1296
      Nissan Skyline R34 GT-T 1999

      By Bman1296 · Posted

      For sale is my 1999 Nissan Skyline R34 GT-T, tuned to 234 kW / 313 hp. I've had the car for a few years as my daily driver. The car is original (as far as Skylines go), with only a few minor upgrades to enhance performance and driving experience, as typical for such a car of its age. Overall, it is in great condition with no body rust, thanks to its earlier import date. It features a top-notch security system (not literally, but it's great!) with remote start and still functional 4-wheel steering via HICAS. It comes with several performance and handling upgrades, including:     Hypergear 450HP Turbocharger running 17 PSI boost, installed mid-2021 by Jaustech     550cc injectors     Nistune ECU     Front-Mount Return-Flow Intercooler     X-Force Stainless Steel Exhaust     Upgraded engine mounts     Bottom end bearings replaced     BC Coilovers     Lenso DR1 rims     Bridgestone Potenza Adrenalin RE003 TL 245/40R18 97W tires, fitted early 2023 The interior is mostly stock, with a few additions:     Viper Satellite Tracking System with remote start     Bluetooth Double-Din Touchscreen Head Unit     Steering wheel cover Cons:     A few paint imperfections here and there     Driver’s seat shows more wear than the others. It's not torn at all, but I've added a seat cover to protect its condition. I also have a CarVX Vehicle History report available for serious buyers, so you don’t need to purchase it yourself. Price: $26,000 ONO.
×
×
  • Create New...