Jump to content
SAU Community

Recommended Posts

Just posting this through just in case anyone might be interested learning how to drift/practise. It is not a competition so you can drive as fast or as slow as you like.

D-Day Wakefield Park 23rd April 2011 (Easter Saturday)

Instruction will be on hand during the day from some of the longest serving drifters in the land.

* YOUR CAR WILL NEED TO PASS SCRUTINEERING - Working seatbelts or valid harnesses, properly installed seats, working brakes and brakelights, working windscreen wipers if it rains, all wheelnuts present and no leaks are the basics. Convertibles will not be allowed unless they have a rollcage that extends above the driver's head. Any questions, please ask or read the FAQ below.

* YOU WILL NEED AN AS1698 (that little red and silver sticker) APPROVED HELMET, LONG SLEEVES, PANTS AND CLOSED SHOES

FREQUENTLY ASKED QUESTIONS: --> Click here to read info about how our days work, scrutineering requiments etc

PRICES:

Initial Drift Club Member: $150

Non-member: $170

Yearly Initial Drift Membership: $170 for the first year. Includes t-shirt, stickers, membership card and discounts on track day prices and free gate entry to most events. Available on the day. Get this if you intend to do a lot of track days. Renewal is $120 per year.

Yearly Associate Membership: $50 per year. Gives you membership in a CAMS affiliated club and the ability to hold a CAMS L2NS license, which is required for most of our events. No other benefits. Available on the day. Get this if you only intend to do a few days. You can upgrade at any time to a full membership

CAMS L2NS license: $50 Available on the day. Payable on the day.

CAMS Day License Available For First Timers, come out and give it a go and purchase a CAMS daily license for a small fee $20.

NOTE: The CAMS license is a once-yearly payment (excluding daily license). After applying for one, you will eventually receive a license in the mail that can be used at all of our events for one year. If you signed up for one last time and have not yet received it, please bring the tear-off bit you received.

Spectators: $FREE

Here's how to work out how much it costs for you:

If you're an Initial Drift member with a CAMS licence, it's $150

If you're not an Initial Drift member, but have a CAMS licence, it's $170

If you're an Initial Drift Associate Member with a CAMS licence, it's $170

If you want to join with a yearly Associate Membership it's $170 + $50 +$52 = $272

If you want to join with a yearly Full Membership, it's $150 + $170 +$52 = $372

Wakefield Park License is available for purchase for $50, pay on the day and is valid for 12 months.

HOW TO ENTER:

Read and agree to this:

1. EVENT DESCRIPTION: This event will be single car drift practice, the action of driving a vehicle in a series of controlled slidesthroughout a pre-determined course, maintaining a standard of control. All activity will take place on thedesignated track section behind appropriate safety barriers. This event includes but is not limited to thefollowing guidelines:

2. DRIVER BRIEFING: All drivers, without exception, will be required to attend the compulsory driver/participant's briefing priorto being allowed on the course. All drivers must hold a valid CAMS L2NS licence or superior. If they donot, they can apply for one.

3. ALCOHOL: The consumption of alcohol by drivers is strictly prohibited. All drivers must maintain a blood alcohol level(BAC) of 0.0 throughout the event. Consumption of alcohol in the pit, paddock or other non-public area isprohibited until the conclusion of the Meeting.

4. CARS AND ENTRANTS MUST COMPLY WITH BUT NOT LIMITED TO THE FOLLOWING SCRUTINEERING GUIDELINES:

• All wheel studs must have nuts and be tightened prior to entry to the track.

• The vehicle battery must be secured.

• No loose items are to be in the cabin (mobile phones, hand-held cameras, road maps etc.).

• Absolutely no fluid leaks.

• Brake lights must work, and brakes must be functional.

• Exhaust must exit outside the perimeter of the vehicle.

• Safety harnesses or seatbelts must be complete units sourced from a recognised manufacturer andmust be fitted and worn within the manufacturer's instructions or limitations and must meet theacceptable standards FIA 8853/98. FIA 8853 – 1985, SFI 16.1, FIA 8854 – 1991, AS 2596, ECE R16 & ASE35.

• Have on their coachwork a blue triangle of 150 mm sides indicating the location of the battery orbattery isolation switch if fitted.

• Driver's seat must be securely mounted to the cabin floor.

• A helmet which complies with AS 1698 and carries markings to that effect, or otherwise be a standardlisted in Schedule D of the current CAMS manual.

•Non flammable clothing must be worn, including cover from ankles to wrists to throat. No person will bepermitted to participate wearing apparel of nylon or similar material. Whilst not compulsory, an approveddriving suit is highly recommended.

•Suitable footwear must be worn. Prohibited are (for example) thongs, Roman sandals, high-heeledshoes, nylon joggers and bare feet.

• In open cars, goggles or visors with a material other than glass must be used (to AS 1609-1981).

DISCLAIMER:5. EXCLUSION OF LIABILITY, RELEASE AND ASSUMPTION OF RISK:DRIVERS

•This event is held under CAMS and follows all relevant guidelines in relation to Drifting events. If applying for a CAMS licence on the day of the event, please be sure to read Section 3 of the Application before signing it for the conditions of the licence and cover.

•Initial Drift Australia Inc reserves the right to, at any stage, refuse entry or participation in the said event and evictentrants and spectators from the venue without question or reason.

* Deposit your money into the bank account (by direct deposit either on the internet or at your bank), and make sure you put the remitter name as your real name, and put SKIDS or something similar as the description. This will secure your spot. All you have to do then is turn up.

PRE-ENTRIES WILL NOT BE ACCEPTED AFTER FRIDAY THE 21st EVENING, AS THE PAYMENT SOMETIMES NEEDS 24 HOURS TO CLEAR BEFORE YOU SECURE A PLACE. (Allowing for Public Holiday Friday)

Bank Account Details:

National Australia Bank

Account Name: Initial Drift Australia Inc.

BSB Number: 082-171

Account Number: 5-6664-6062

Once you have transfered the money, email registration (at) initialdrift.com.au with the confirmation/receipt number and you are in!

For those of you who would like to pay on the day, pricing will be $170.

Day will be separated into groups, Intermediate and Advanced drivers will be allowed passengers (minimum half cage required).

Want to be a passenger in a drift car? To get a seat in one of the cars the cost is $30 and will get you access to unlimited rides throughout the day. It is recommended to seek a drivers permission to secure a seat before you pay for a passenger run, for drivers, it is the perfect opportunity to scare your mates.

Gates open at 8am

Track Action from 9:30am till 4:30pm.

Cheers,

The IDA Team

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hows your intake piping? Are you still running stock? Having in the stock AFM position would mean, if the BOV was shut/venting out, it'd create the almost stalling kind of effect right // "the rich pulse behaviour" due to MAF thinking air is flowing ? But this would be better than having the bov in the stock position + MAF on/just before cross over piping right?
    • Essentially, yes. Although I wouldn't put the AFM on the crossover pipe. I'd want to put it into what amounts to the correct size tube, which is more easily done in the intercooler pipework. I bought a mount tube for card stile AFM that replaces the stock AFM - although being a cheap AliExpress knockoff, it had not flange and I had to make and weld my own. But it is the same length and diameter as the stock RB AFM, goes on my airbox, etc etc. I don't have a sick enough rig to warrant anything different, and the swap will take 5 minutes (when I finally get around to it and the injectors & the dyno tune).
    • So to summarise, the best thing to do is to move recirc to between turbo and IC, and maf on the crossover pipe. Meaning I'd need a recirc flange, drill a hole in the piping on turbo outlet area. And drill hole on crossover to fit/weld maf sensor? Either that or put the MAF on the turbo inlet right?  Is an aftermarket recirc/blowoff valve recommended? Do currently have family in Japan so could probably bring something back with maybe a cheeky lil SuperAutobacs run?
    • Yep, so far most have said that it looks like corrosion on the wall from piston not moving. Which then has probably damaged the oil rings and caused those vertical marks. The longest the engine was still after the rebuild, was the winter of 2018 - 2019, plus the boat trip to Japan. When I shipped the car, it had normal gas in the tank but before that winter pause, it had E85 in tank.  In any case, even if either one of those was the cause, it happened close to 6 years ago and the car has been driven something like 30 000kms after the fact. Again, apart from the plugs and the dip stick, there is nothing in the way the car runs that would indicate what has been going on in the engine. I am going to consult a shop and ask their opinion, what would be the best approach. I do have some access to a garage I could use to diagnose further myself, but time is very restrictive. Might end up buying another engine that could be used while this one is being remedied. Without pulling the head, it will be impossible to find out if it needs another bore, but here's to hoping a hone would suffice.  Goddamnit, I would really have preferred this not happening.  
    • Boot is going to be replaced eventually. I just wire brushed what I could and rust converted. Then painted in rust kill primer. the spoiler also got repainted and plugs replaced on the ends. The under side of the bonnet is going to be black also, currently white. But red on the top side, same colour code as the silo to begin.
×
×
  • Create New...