Jump to content
SAU Community

Recommended Posts

I'll start by saying my car got yellow stickerd on saturday for a loud ehxuast.. Now what I need to know is whats the deal with taking ur car to the pits? Is it easy to spot the place to line up place if im the first person there.. Also does the O'Connor pits accept skylines? ... And is it hard to get a booking at any of the other places ? because my car will be unlicensed by the 14th if i dont get it down there before that date..

THANKS!

Link to comment
https://www.sau.com.au/forums/topic/360155-pits-question/
Share on other sites

I got yellow as well for pod and not having mash at the front bumper 2 weeks ago .

went to O'Connor with all my mods and adjustable coilovers they just told me to raise the car a bit coz the exhaust part was below minimum 100mm.

It all depends who you get as an inspector sometimes they can be nasty or good to you ...

try to keep it as stock as possible no flashy mods and all you lights & indicators ,seatbelts must work and you will be fine.

if you modified turbo ,exhaust manifold,suspension you will need to fill Vehicle Standards Bulletin 14 (VSB 14) from and submit it usually take around 3-4 weeks for form to get processed.

http://www.infrastructure.gov.au/roads/vehicle_regulation/bulletin/vsb_ncop.aspx

hope this helps mate

Link to comment
https://www.sau.com.au/forums/topic/360155-pits-question/#findComment-5750602
Share on other sites

Fees yeah, initial fee is like 87 or something.

Retest 70something.

For the non bookings, if you want first in, get there really early.

I just got there about lunchtime, brought food drink and played games on my phone lol. (Waited 30-45mins-ish)

As for spotting it, I went to the Welshpool one and its next door to the licensing centre there - 4 big lanes with roofs over it so yeah, easy to spot :P

Edited by Ten Four
Link to comment
https://www.sau.com.au/forums/topic/360155-pits-question/#findComment-5750797
Share on other sites

I'll start by saying my car got yellow stickerd on saturday for a loud ehxuast.. Now what I need to know is whats the deal with taking ur car to the pits? Is it easy to spot the place to line up place if im the first person there.. Also does the O'Connor pits accept skylines? ... And is it hard to get a booking at any of the other places ? because my car will be unlicensed by the 14th if i dont get it down there before that date..

THANKS!

LOL does the oconnor pits accept skylines! hahaha

ok seriously, first inspection fee is $87.40, reinspection fee is $61.00, just go there and you will see which line you have to go to. If you are going for an inspection prior to 830am please make sure you pre-pay your inspection (go to a licensing centre or call 13 11 56 to pre-pay).

Link to comment
https://www.sau.com.au/forums/topic/360155-pits-question/#findComment-5751680
Share on other sites

....

ok seriously, first inspection fee is $87.40, reinspection fee is $61.00, just go there and you will see which line you have to go to. If you are going for an inspection prior to 830am please make sure you pre-pay your inspection (go to a licensing centre or call 13 11 56 to pre-pay).

Jeez, that's expensive (Or is it always been that prices?). :(

Link to comment
https://www.sau.com.au/forums/topic/360155-pits-question/#findComment-5751686
Share on other sites

Pretty sure it's always been those prices. Farkin bullshit when you have to pay for a reinspection to get an extension when you haven't changed anything... Like when I had to replace the aluminium pedals on my car with factory rubber ones, I couldn't find a factory accelerator pedal so I bought one from Nissan. Was gonna take 4 weeks to arrive so I tried to explain that to the pits. Nope, I had to get the car inspected that week to get a two week extension, then again in two weeks to get another one week extension. Had to pay fucking $185 despite knowing that it was going to fail each time.

Link to comment
https://www.sau.com.au/forums/topic/360155-pits-question/#findComment-5751746
Share on other sites

LOL does the oconnor pits accept skylines! hahaha

ok seriously, first inspection fee is $87.40, reinspection fee is $61.00, just go there and you will see which line you have to go to. If you are going for an inspection prior to 830am please make sure you pre-pay your inspection (go to a licensing centre or call 13 11 56 to pre-pay).

Do you work at the pits?

Link to comment
https://www.sau.com.au/forums/topic/360155-pits-question/#findComment-5751837
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Modern oils are amazing. Add tyres to that as well.
    • Probably a smart choice to buy one vs build, purely for the motivation part as you said! Imagine the metal dust everywhere from grinding all the steel to build one. Ha ha ha!   Also, post a photo of your garage.   Mine is below, this is where I've been cleaning and have already half filled a caged 6*4 trailer. And this is after my cleaning expedition mentioned previously... The middle normally has a car in it, but I'm dumping things in the middle as I sort through them. And poor skyline was dusty and has had the lightest few drops of rain and now it looks atrocious and needs to be dragged back out and washed thoroughly! And yes to the right is technically another bay, you really can only see 2 bays out of 3 in this picture.  
    • It's more like on average the things I see a lot of things going wrong. Yes, usually the people who reach out are the ones who are having problems but on average it feels like mechanics and tuners here aren't really competent. I swing between thinking my standards are just way too high and wondering whether people really are just this dumb. I just had the strangest 10+ reply argument on a Facebook group over someone insisting that the factory R34 GTT boost control solenoid reduces boost pressure to 5 psi when it's on and raises boost pressure to 7 psi when it's off despite showing the exact plumbing in the factory service manual and the solenoid behavior detailed in the FSM.
    • I steam cleaned my near new set of volk gtc wheels 14 years ago and farrkkked them lol. The clear coat cracked like spider webbing in several areas. Lesson learnt don't do that. 😭
    • If you don't touch the CAS, then you're fine.
×
×
  • Create New...