What's Wrong With This Picture?

[RB25PWR]

Just bought BC BR Racing coilovers.... but something doesn't look right. Hopefully it's just my ignorance but there's no bracket on the side? Like in the picture on the website?

http://img688.images...us/i/bcbrn.jpg/

This picture + attached one etc.

They're for my r33 GTS-T...

Edited April 8, 2011 by RB25PWR

[scotty nm35]

Get on to the supplier, the bracket should come separately in the box, it clamps around the bottom mount on mine although on that pic it is welded on.

[RB25PWR]

On the box it says 96-98 GTS (obviously meaning models between 96-98); but do the GTS's have different suspension to the GTST's?

The top of the front spring also looks identical to the rear one ... nothing there apart from the damper setting... I'm confused

edit: I just noticed the sprint rates are 10/8 also, instead of the 8/6

Edited April 8, 2011 by RB25PWR

[bored33]

Check the part numbers, could be the wrong set.

[Munkyb0y]

the coilovers in the picture are not for r33. they are probably just the generic image they use.

r33 coilovers will have eyelet at the bottom for mounting, not a bracket. they also only have 2 bolts at the top, not 3.

the camber adjustment in the pic above doesnt apply to r33 either. the fronts will look like the rears. round, with 2 bolts, and damper adjust in the centre.

edit: below is the general shape and type that suits r33. of course yours are a different model, etc. but will still look similar in style.

Edited April 8, 2011 by Munkyb0y

[RB25PWR]

ok sounds like everything is ok then... thanks munkyboy.

[jjman]

yeah the pic you are using is an incorrect reference.

What you have got is the right coilovers. UNless the spring rate of 10/8 is for the ones you ahve as opposed to the pic. 10/8 is going to be pretty damn hard. 8/6 is the way to go unless you are tracking it.

Iv got them for my R33 GTST n are the same ones as your pic (and iv got the 8/6)

Goodbit of kit for the street. N esp for the money...