Z32 Afm Wiring Orientation

[T.D]

Hey, I just wired up my new Z32 AFM and it came with the Bosch plug, which isn't a drama as I'm handy with a soldering iron anyway.

I was following the tute in the Tutorial/DIY section and needed confirmation what I've done is correct as my Bosch plug had numbers on it and on the AFM itself, it has "A", "B", "C".... etc.

http://www.skylinesa...-fit-a-z32-afm/

So going by my photo, does it all look like it's wire correct?

Yellow: Signal wire (connects to Orange w/ blue wire) <----------------- AFM pin "B"

Blue: 12v ground (connects to White w/ blue) <-------------------- AFM pin "C"

Blue: Signal ground (connects to White w/ blue) <------------------ AFM pin "D"

Red: 12v power (connects to Black w/ white) <------------------ AFM pin "E"

Note the numbers on the plug are what threw me off as it goes from 1 through to 6, from right to left

Cheers.

Edited April 9, 2011 by turbodragon

[T.D]

Anyone?

[JonnoHR31]

not sure bout wire colours but as far as pin numbers go you've got it right

[T.D]

Excellent, thanks for the reply.

Is there anyway I can check using a multimeter or something to mke sure it's right?

[webber]

I Agree

[T.D]

Thanks for that Webber, that was exactly the diagram I was looking for as it shows the AFM orientation

[webber]

Anyone reading this, if you have any other AFM you want me to add, i am only a PM away.

[sirjb]

Yeah this is correct