Jump to content
SAU Community

Recommended Posts

2 weeks ago i purchased my 350z anniversary wheels , although they were just a little to plain for me in the standard alloy colour . so today i thought id pull out the spray gun and give them a more stealthy aggressive look. the paint i used was the factory black r34 GV1 from memory .much to my suprise they came out better then i expected , totally give the car a different look.

for anybody at home looking to do something similar, the process was pretty simple .

1. rough up existing paint with 400 gritt

2. clean with thinners

3. spray a dust coat with the base paint.followed by 3 firm coats

4.2-3 coats of clear

5. maybe even a bit of a cut and polish depending how fussy you are

overall the end result was worth the time , took about 1 hr per wheel , off and back on again. ill throw a final pick up tomorrow , bit too dark by the time i got inside :P

cheers , and comments or questions hit me up

post-32277-0-17504400-1302597436_thumb.jpg

post-32277-0-78745000-1302597656_thumb.jpg

post-32277-0-26764700-1302597665_thumb.jpg

post-32277-0-16068600-1302597676_thumb.jpg

post-32277-0-32547600-1302597777_thumb.jpg

Edited by sky017
Link to comment
https://www.sau.com.au/forums/topic/360681-bit-of-diy-painting-today/
Share on other sites

Arthur T3 - it was a pretty sunny day yesteday when i sprayed them, being acrylic it dries pretty quick too. but what i did was after id spray the clear , i gave it 15 . then rolled it back to the car , carefully put it back on . put the bolts on carefully , pretty easy considering they are a pretty wide hole . then just left them over night to dry completely . saves a bit of time so i can get the next wheel, off to prep. i was keen to get them done before the sun went down :P cheers

aahh of course, it was sunny..

i live in melbourne, we dont really get that here .

Ive been painting in the shed with the heater goin and still having trouble drying, ive resorted to doin a coat a day during the week and assemmbling the next weekend :(

aahh of course, it was sunny..

i live in melbourne, we dont really get that here .

Ive been painting in the shed with the heater goin and still having trouble drying, ive resorted to doin a coat a day during the week and assemmbling the next weekend :(

hehe poor you by the sounds of it. definitly hate drying process, i try to be a perfectionist at times , but damn sometimes i just want it done and back on the car, i sprayed my rear bar on a sunny day ,then bang raining! heres me out in the garage still spraying lol. only crap thing is it goes milky in the cold , never the less all goes away when you cut it bck :P

thanks for the positives guys , much appreciated

i do a few colour coats and a couple of clear, but havent cut it, could be why my finish isnt as good,what do u use?

Think i have a bottle of mequiers fine cut would that do it?

i must say it requires a fair bit of work in regards to cutting to get that high gloss finish . usually rub back from 1500 - 2000, then use a cutting compound. iv used this septone stuff i purchased from the car paint place, followed by a polish compound ,then some other detailing polish. all depends what your doing , but thats my process for body work , seams to work for me. by the way in saying that , its a must you use a power dril or a variable speed grinder with buffing wheel / foam pad attatched to really get that gloss to shine , using some cheap buffing wheel from kmart wont be sufficient enough.

<--- see my profile pic

did this on the old r33 years ago.

same technique, wet sand, but i also used some putty to smooth out the gutter rash etc so took me a full day with all the waiting and drying.

these wheels do look nice though

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, really happy with how it all turned out As for aftermarket lip, nah, I'm not really a fan for practically reasons on a street car that gets driven everywhere  I did have the full lower kit on my 2015 STI, but found the front lip scrapped alot, even at stock 4x4ish ride height As the NC sits now, with the lowest point of the car at 110mm, so just legal, some steep driveways and steep speed humps will still "just" scrap those little plastic OEM air dam thingies on the undertray just before the front wheels
    • Here's one I help build and tuned a decade ago, Garrett  GTX3071R Gen 1, T3 twin scroll 0.83 rear housing. Went from larger 272 cams down to smaller Tomei Poncams to help with the low end. S13 non VCT motor. Car was purpose built for the track, hence low down was the focus. Note the actual dyno chart shows lower boost, however the EBC and boost gauge showed 1.9Bar (Ignore the torque, I was young and didn't know how to set derived torque)  
    • I’m doing some side developments on SR20det S13 engines, its one my hobby cars used it to compare flow capacity of some smaller size wheels. SR20det is one of another JDM legendary engines I'm sure there are plenty of SR enthusiasts on this forum, I will share results some common turbo configurations here. a quick run down of what the car is: Wide body 180sx Type X with black top engine (blue). It has: Stock bottom end Haltech 1500 ECU 5-0 motorsports trigger kit Kelford SR20DET Beehive Spring with Titanium Retainers Kelford Cams SR20DET S13 188-B 268/272 Cams G25-660 Turbocharger in T2 .64 rear housing internally gated ARP Head studs MLS head gasket 1000CC ID injectors Walbro 450L Fuel pump Front mount cooler kit JJR’s 3 inches turbo back exhaust (its too short for the 180sx it had to be extended) Pump 98 fuel Hub Dyno tune So far made 270rwkws at 22psi full boost by 4500RPM. Engine is very knock limited hence a pretty bad looking top end. From previous experiences it seems like SR20dets are happier with bigger size turbine, some thing like a GT30 would make way better top end, but on same time response is lost. It won't be a problem with S15 VCT engines. I'll be testing alternative turbine housing, turbine wheel and possibly dump pipe options for extra flow to resolve the problem and of course E85 would resolve all the issues.            
    • Awesome writeup and details. Thanks for sharing the story so far. I can relate to parts of it with my previous car and some of the issues I had to deal with.
    • Wow the colour matched hard top completely transforms the car. Are there any nice front lip options for the car or is that off the table?
×
×
  • Create New...