Clear Indicator Lense For Series 2 Project

[75coupe]

almost threre...

its quite easy to shape tbh, just need to cut the other lense and then remove the orange lense from the unit, which Ive done before, its just messy. then I'll see if I can mount the same reflector that the foglight uses in the indicator side...

[75coupe]

so now I need a continuous diamond encrusted cutting disc so I can get the perfect shape...

I already have a 110mm diamond encrusted hole saw, worked great, and a 5mm diamon hole saw, which is one I use for work...

this is going to work, but fitting the reflectors into the indicator side is really hard and may not be doable in a decent way, so may have to live with the reflector that is there... means there will be a slight difference in colour between foglights and indicators but this as far as I know will be only time Ive seen the glass foglight lense used on indicators, I'll use a silver coated orange bulb, I think thats the best I can do...

[75coupe]

Getting closer again, just got them both cut, give them a clean up and them i can ready the lens half...

[PM-R33]

Good stuff man! Good to see some one finally achieved it

[75coupe]

And done!!!