Jump to content
SAU Community

Recommended Posts

should be ok to just unplug, think it only splices into the ignition system and bypasses part of it for a designated time, so if you unplug it, it should still work as normal. Isnt it easy enough to just unplg it and try it out?

Not really it seems quite messy under the steering wheel I'll have to tale the interior panel out tommorrow and see if it just unplugs

hopefully it will be fine

Cheers

PS if it works anyone want a FET turbo timer with R32 harness for 50-60 bucks

  • 5 months later...

Hi guys, I am thinking of installing a racecar-style ignition on/off switch and am thinking that using a turbo timer harness may be the way to go.

Do turbo timer harnesses hook into both the 'on' and the 'start' circuits?

Thanks, Ben

Theres no need for them to hook into the start wire because they only need to keep the car running when key is off. Should hook into ACC, ON and constant power.

What exactally do you want to do? have the normal key to turn everything in the car on then having a race style switch to start?

Thanks, I gathered the same with the start wire. I want to have one click switch to turn the car to on and a push button for start. I don't think I need an acc switch if I go straight to on. I don't want to use my key at all but would probably want to wire is so rant I could still use the key if I wanted to.

That's gonna make your car quite easy to steal

And therefore if it was stolen and recovered insurance would refuse payout

yeah, this

It would have to retain a key to turn on the electrics and push button to start only when the key is in. The only way I could see it being safe

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Dredgggggeeee time; I have recently finally started driving the car. It sat for so long that the fuel tank gave birth to rust sludge and blocked my lift pump sock and one of my walbro 460's and left grime, rust chunks and muck all through the surge tank and system. I decided to commit and pull the trigger on an oem r32 gtr fuel tank and Frenchys twin 460 / sender / surge tank hanger combo and all new larger lines and fittings etc, also boost doc heater hose kit / new heater core and a heap of other bits and shits like wideband sensor installed in the dump and Syltech iacv + lines and all wired and added to current tune. now having lightly driven it a couple times without issue, I can happily report on the hta3076 in its current tune. still no boost control switched on, 20psi gate springs, car makes 22psi at 3200rpm in 6th gear with 30-50% TPS from cruise at 100kmh. Going by the old graph, this means it should be making 300-325whp at the same numbers above. Very very responsive setup under true road driving loads. all that's left for the build is body loom + PDM, finish the remote aircon setup, install carbon fibre parts and go for full tune and 30psi. the 315 rear tyres are now performing like they're 195's, wheel spin in any gear at almost any rpm, whereas my previous setup hooked up in 3rd no issue, albeit Nt01's back then / RB25 5spd vs (new) old date r888r's Z34 6spd now, + obviously all the support upgrades I listed in the quoted post above. car sits at 1-3psi on cruise at 100kmh, expectations totally exceeded and I'm beyond stoked with all this so far. IMG_4848.mov
    • I've also been eyeing their rear axles for my car. I purchased seat mounts from them about 7 years ago and they were hot garbage so I've been a little wary about purchasing them. With that being said, please buy them and get back to us haha. 
    • Can a moderator please move this into the right category.. I've accidently put this into racing build thread 🤦🏽‍♂️
    • Being a manual, we very quickly ordered new R34 gearbox (From Nissan) and remaining parts from Kudos motorsports. Would highly recommend the team there. Ultra helpful and quick to share advice and upgrades. We are in the middle of taking the Auto out (Genuine 94,000/kms) and putting the Manual in this weekend. Part 2 of the build will include likely a Plazaman Intercooler and Plenium, Hks Exhaust with Tomei Dump (ordered).
×
×
  • Create New...