Jump to content
SAU Community

Recommended Posts

I don't understand what's going on here

the man just wants his exhaust tips enlongated and then there's people saying get a full new exhaust?

As long as no mufflers are touched, making exhaust tips longer will make minute difference, if any to the sound of the exhaust.

Am i correct to assume stock exhaust = quiet? if so, will make no difference to sound. Only as long as the mufflers are left as is and just the last pipes are extended.

my 2c

I don't understand what's going on here

the man just wants his exhaust tips enlongated and then there's people saying get a full new exhaust?

As long as no mufflers are touched, making exhaust tips longer will make minute difference, if any to the sound of the exhaust.

Am i correct to assume stock exhaust = quiet? if so, will make no difference to sound. Only as long as the mufflers are left as is and just the last pipes are extended.

my 2c

You've never seen a sexy Hyundai or Honda with a cannon have you? Of course the tip makes a difference to sound, it sounds terrible! The tip of the exhaust on a stock exhaust is a type of muffler, if you change that muffler without changing the exhaust it sounds like absolute shite! Victor said he wants to change the tips, hence going to sound terrible. You can't get aftermarket tips for cheap that are going to sound good, high quality mufflers are expensive. If you're going to spend that money getting a tip welded on and your exhaust extended, you might as well go whole hog and get an amazing quality exhaust that sounds like Pamela Anderson on full scream.

only wants the extend it, what, an inch, no difference, if you don't want a full exhaust(Kermit is the man on that one), just buy the tip you want, go to a small exhaust shop, and ask them to put it on, if it takes them more then 10 mins, there's something wrong. shouldn't cost much to do. Either that or make friends with a welder :D

A++++++++++++++ for Kermit, what a fkn champ :D such sexy welds and nice sound to boot

+1 for Kermit!!!! I got my Exhaust repaired when he saw a fault for it and it was only minor n he did it for free as it was not the original job Getting done. Got a Straight pipe now with a Cannon @ da back.. Crackly Deep Sound :D

Ok. Thanks, mate.

I will keep that in mind. :)

By the way, do you live or work around Maddington area? I saw twice silver Stagea about 5:40pm this week coming out of one of the street.

that may be me, are you sure it wasnt white?

You've never seen a sexy Hyundai or Honda with a cannon have you? Of course the tip makes a difference to sound, it sounds terrible! The tip of the exhaust on a stock exhaust is a type of muffler, if you change that muffler without changing the exhaust it sounds like absolute shite! Victor said he wants to change the tips, hence going to sound terrible. You can't get aftermarket tips for cheap that are going to sound good, high quality mufflers are expensive. If you're going to spend that money getting a tip welded on and your exhaust extended, you might as well go whole hog and get an amazing quality exhaust that sounds like Pamela Anderson on full scream.

only wants the extend it, what, an inch, no difference, if you don't want a full exhaust(Kermit is the man on that one), just buy the tip you want, go to a small exhaust shop, and ask them to put it on, if it takes them more then 10 mins, there's something wrong. shouldn't cost much to do. Either that or make friends with a welder :D

A++++++++++++++ for Kermit, what a fkn champ :D such sexy welds and nice sound to boot

Ok.

Sorry guys. I am abit confused now, with some saying crap sound and some no difference. I probably call Kermit on this before deciding on it.

Yes, I just want to extend an inch and maybe, change the tips to abit bigger stainless steel type. I can asure if Kermit also agree that it will sound crap, I won't do it. I rather save up and get a full system.

I am not after any sound or power improvement as I only drive it on weekends for relaxing cruise. Plus, if I get asked by an offier what exhaust system I have, I don't want to say it's aftermarket at this stage.

Thanks, guys for all the replies. I learn new things everytime on SAU. :)

Neither :)

Ok.

I just thought of asking because I've seen it twice already.

that may be me, are you sure it wasnt white?

I am sure it's silver. A gentleman with beard driving it.

I think I've already seen you around sometimes. Your's white that goes around Nicholson Rd? :)

You've never seen a sexy Hyundai or Honda with a cannon have you? Of course the tip makes a difference to sound, it sounds terrible! The tip of the exhaust on a stock exhaust is a type of muffler, if you change that muffler without changing the exhaust it sounds like absolute shite! Victor said he wants to change the tips, hence going to sound terrible. You can't get aftermarket tips for cheap that are going to sound good, high quality mufflers are expensive. If you're going to spend that money getting a tip welded on and your exhaust extended, you might as well go whole hog and get an amazing quality exhaust that sounds like Pamela Anderson on full scream.

He never said he wanted a CANON on it just an extension to clear his rear bar which any exhaust shop or kermit could do in 5 minutes thats why i say get off ya arse and do it as it won't make any difference to the sound

He never said he wanted a CANON on it just an extension to clear his rear bar which any exhaust shop or kermit could do in 5 minutes thats why i say get off ya arse and do it as it won't make any difference to the sound

That is correct. :)

Thanks, guys. I am not in a hurry to do this, but will post up asap.

put up pics of how it is atm!

if it sits in i say extend it as cheap as you can to suit your body kit. just get it cut from behind ur muffler/before ur cat and extended with its current width pipe -ie 2.5" etc

i saw a *sigh* 2 door rice car yesterday i cant remember what it was but it was like a mighty boy equivelant in a car, it was fully kitted up and the rear bar was made for twin exhaust but he only had a single! looked so stupid!

He never said he wanted a CANON on it just an extension to clear his rear bar which any exhaust shop or kermit could do in 5 minutes thats why i say get off ya arse and do it as it won't make any difference to the sound

That is correct. :)

Thanks, guys. I am not in a hurry to do this, but will post up asap.

Fair enough, my mistake. I thought when you said you wanted to put a stainless or chrome tip on it you meant more than just extending the stock exhaust. Yeh if all you want to do is extend the pipe a little bit so the exhaust sits further out then it won't make a difference to sound.

Fair enough, my mistake. I thought when you said you wanted to put a stainless or chrome tip on it you meant more than just extending the stock exhaust. Yeh if all you want to do is extend the pipe a little bit so the exhaust sits further out then it won't make a difference to sound.

That's all right, Martin. My mistake as well, I should have made it clearer.

I was busy last night with friends. Hopefully, I will post the photo up tonight.

Edited by VNS 24

Ok.

I just thought of asking because I've seen it twice already.

I am sure it's silver. A gentleman with beard driving it.

I think I've already seen you around sometimes. Your's white that goes around Nicholson Rd? :)

yeah thats me, but there is a white series 2 with a ovlov sticker on the back window that lives about 30 seconds from mine, pretty sure he works at xspeed

Edited by Blizzerd

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To be fair passengers who aren't silly and have been in proper fast cars have often been pretty impressed once you hit 4th gear   
    • I suppose that's true. Barring almost any situation, I'll never sell so what the market does is kind of irrelevant to me. It's possible I'd make most of my money back. That spreadsheet I mentioned? Maybe I could make back more than what the car's total costs thus far are, but the parts and all that is possibly a different story... Thanks for reading. It was certainly a good moment and just makes the ties to the car that much stronger. It's exciting that the option will be there to bring it over, however I have some plans with a shop that may end up keeping the car there longer, not sure. Coupled with the fact I want to move there and haven't solidified any path yet. So in a way, it feels like I'm in a limbo state that is uncertain; time will tell.
    • No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
×
×
  • Create New...