Jump to content
SAU Community

Rev Tacho Going Backwards R33

jetblack

By jetblack,
in General Maintenance

 Share

Recommended Posts

jetblack Collaborator

jetblack

Posted
Posted

I've started my R33 GTR today and found out that my tacho was doing strange things. When the engine is idling, it works ok and shows the real rev value. But when I rev the engine a little bit, if it goes higher than 1,800rpm (approx), it begins working backways!!! The more you rev the engine, the closer you get to 0rpm!!

After a given rpm value, the needle is even stuck on 0rpm and is not moving anymore.

If you back off the throttle and let the engine slow down until iddle, the needle comes back to life and shows true rev value again (1,000 rpm).

And so on.

any ideas how to fix this? it started after i pulled the cluster out to change globes, have checked all connections and cleaned them. no avail.

ive read it may be a loose earth wire,

Link to comment
https://www.sau.com.au/forums/topic/361007-rev-tacho-going-backwards-r33/
Share on other sites
Jmans GTS-T Enthusiast

Jmans GTS-T

Posted
Posted

Hey man,

I have had the same problem for the past few months, it is driving me MAD!!!!

I have ripped out the cluster and played around with what people have suggested but nothing seems to work!!!

I think this one may be an issue under the bonnet!

If anyone knows where to look and repair under the hood please let me / us know...

PS. "Jetblack" if you have fixed yours bay now... please let me know...

Cheers Jamie

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      🚨 Need Advice! Overcharged for Engineering Report 🚨

      By GTSBoy · Posted

      Can we see a scan of the original quote? The problem with engineers (and by this, I mean, all engineers across all engineering industries) is that there are "engineers" and there are "engineers" (you'll have to imagine the two different vocal emphases on those two versions of the same word. Engineering is a mindset - your farm kid who spent his life rebuilding the tractor will likely make a good engineer. The farm kid who spent his life taking photos of butterflies.. perhaps not. But on top of that mindset, the modern engineer has to learn how to write so that there is absolutely no way of being misunderstood. Proposals/budget estimates/quotations are one place where this is absolutely vital. You have to delineate your scope of supply with extremely hard boundaries, and anywhere where there is any possibility of not being able to have such a hard boundary, you need to write language that will cover you from scope creep, cost overruns, the inevitable interference of the client or their "engineer", etc etc. Now, if your clients are the BHPs and the Rio Tintos of the world, and similar, then you get good at this. If you are an automotive engineer, pitching work to the great unwashed masses, your skills in this area might not be well developed, because you're only dealing with knuckle draggers trying to get a big block legal in a Torana. And when I say "might not"....I'd suggest there's a better than even chance that any such skills might be completely absent. So, we might be able to look at your quote and see what the opportunities are for rebuttal.
    • eli995
      NPboosted manifold fitting purpose

      By eli995 · Posted

      It’s an rb25 so a gtst and I’ll get that valve
    • eli995
      NPboosted manifold fitting purpose

      By eli995 · Posted

      Thank you for this my turbo doesn’t have the nipple so I’ll get one installed in the turbo to Intercooler piping. I’ll get everything I need and locate it all using the information you both gave and get back with an update. 
    • Dose Pipe Sutututu
      R33 gtst gearbox top barb

      By Dose Pipe Sutututu · Posted

      Please do not connect it to your manifold. If you do, as GTS suggested please record the lot in 4K with good mics attached.   On the factory Skyline, there's a upside down pipe that allows it to breathe, looks like this   
    • Shoota_77
      🚨 Need Advice! Overcharged for Engineering Report 🚨

      By Shoota_77 · Posted

      For me I'd need some serious justification for why it has blown out.  Have you questioned him on it?  To be honest if you didn't question him right from the get-go on the first invoice that was already way over the initial quote and then you've (presumably) then paid another $1375 on top of the first invoice, then you're pushing shit uphill to get a favourable result now... It was years ago I last got an engineer out but it was around $450-$550 per visit.  That was just to inspect each progress point he gave me for the project.  Is he just doing progress inspections or is he providing engineering diagrams, technical assistance, etc??  If he's not, he's a filthy rip off merchant.  If the $3100 is the final sign off then you need to cop it on the chin, pay it and move on.  If it's not, piss him off and get a new one.  Not many Jeeps I'd value at $10K full stop let alone just engineering fees on a written off, half actual value WOVR Jeep....
×
×
  • Create New...