Jump to content
SAU Community

Toowoomba Skyline Owners


olloSKYLINEollo
 Share

Recommended Posts

Ah that's good to hear a-bomb Nick...yeah you want to at least be able to pull up again. I can live with that you don't want to do corners anymore but being able to brake harder than you can accelerate is always a must for me! Out-braking and out-handling wins as many races as out-running :P

Edited by tommis85
Link to comment
Share on other sites

I have a engagement party :(

Also incase you missed it I picked up some goodies through the week:

Cusco 2 way mechanical LSD (goodbye crappy 3.5 nastiness hello awesome tear your face off 4.11 acceleration! :devil: )

And I've broken my number 1 rule of "brakes only slow you down" and gone and purchased r32 Gtr calipers front and rear with slotted rotars... (So now I can stop lol)

Good on ya dude.

Bout time you listened :P

Cusco will be a bit rough round the edges and you'll clunk almost everywhere. Clutch in when you drive past coppers and you'll be fine :P

Am wondering if the NA 33s had the drum brake setup on the rear as if they don't you'd have to get that setup as well or you'll be without a handbrake.

Funny that you should mention that because I was thinking the same thing this morning. I haven't done anything for the last week or so because I re-sprayed my wheels - they're all good again now. Must say they looked quite horrendous indeed! Looked like it was just a colossal failure of the clear coat :/

Not sure if I'd head back out to it man - it's just all yank pretty much. Would be good to see some more JDM there, or even some German/Italian muscle and what not. So yeah not sure Nick - see what happens I guess.

Dude, we are about the only JDMs in town that do try to make an effort LOL

We aren't gonna see any more :P

If we don't rock up, then there's no representation.

Link to comment
Share on other sites

Went to that Nandos meet with 180 Nick....we definitely need to get a couple of us together next time round. This time they really had a fantastic turn out there!!

So what can we do cruise wise in the mean time? A trip to a pub lunch would be nice....seeing that you're mentioning food Clint ;)

Link to comment
Share on other sites

Pub lunch I can always do....well not always but most times :)

Would really like to find time to do a Happy laps too. I wanna see what this car can do.

Are there any of the new people around?

Saw lots of cars there I've never seen before. Bigger JDM representation this time around too and most of them were different from the first time I went.

Plenty of new people around just hanging around in their little cliques. We need a few more bodies so we can have ours :P

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • The two diagrams are equivalent. The R32 one is just one sheet out of about 3 showing everything in the whole car all at once. And without knowing the functionality that occurs in the modules, they are both equally opaque.
    • 8v - 2.48ms 9v - 2.15ms 10v - 1.74ms 11v - 1.41ms 12v - 1.15ms 13v - 0.99ms 14v - 0.89ms 15v - 0.82ms 16v - 0.81ms I'm running these values on my RB20 Neo with 570cc Denso R35 stock jets and it's great. Also bought a set for my Legnum VR4, love these injectors!
    • Thanks for your reply,  Those blue/green wires running to the actuator aren't attached to anything, so I'm not sure how the central locking is still working. I will have to take a good look tomorrow, I don't have the car with me. After googling it seems like a pretty common aftermarket actuator which even uses the same green/blue wires the immobiliser required. i'll test everything tomorrow and if it's working i'll melt the solder, strip it, resolder and neaten it all up with some heat shrink. I don't have to understand it if it works hahaha I just don't want a fire/ short circuit. That R32 diagram looks more like a continuity chart? Can you make sense of this form the R34 manual? 10V is probably due to very flat battery, i'll recheck as well tomorrow, I did have to jump start it haha. Thanks again!  
    • So, COM doesn't mean comms. It means common. What common itself means will depend on the type of device. For a two directional actuator (ie, one that can push and pull on the same output rod) then the common will typically just be the earth connection. There will be at least 2 other wires. If you put 12V on one of the other wires, then the actuator will push. On the other 12V wire, it will pull. Can't quite make out what is going on with the wiring of your actuator. It appears to have several wires at the actuator plug, but there only appears to be 2 wires where its loom approaches the door control module, with at least one of the others cut off. I don't know these actuators off by heart. I'd have to look at a wiring diagram for one before knowing what the wires were about, and that's despite me having to replace one in my car not all that long ago. Just not interesting enough to have dedicated memory set aside for trivia like that any more. That actuator is an aftermarket one, not the original one, which probably died and was replaced. That might require some sort of bodge job on wiring to make it work. Although nothing should justify the bodginess of the bodge job done. As to the soldering job on the door module's loom plug. Ahhahhahaha. Yes, very nasty. Again, I cant tell you what any of those wires do. You'd need to study the R34 wiring diagram (if you can find one that shows the door module). I don't think I have any. I'd have to study the R32 diagram to start to understand what mine is doing, and again, even though I've had a problem with mine for the last 25 years (where it locks the passenger door when the driver's window reaches top or bottom of travel) I'm just not interested enough to try to to work it out. So long as it's not burning down, it's fine with me. Here's the R32 GTR diagram, which, confusingly, has rear door lock actuators and window motors on it!! As you can see, unless you understand the functions of the door lock timer and the power window amplifier, you'll never be able to work out how it works just from the diagram. I don't imagine that the R34 one is any better. Hopefully an R34 aware bod can help. FWIW, the two wires that are cut and joined look like they are both power supply - so hopefully it is not fatal to join them. The 10V you measured on the cut off free end of one of them is concerning. You'd expect 12V, and it might be the reason for the bodge job joining them together.
×
×
  • Create New...