Jump to content
SAU Community

Recommended Posts

So how many of ya's are actually going to that happy laps?

I'm still undecided....will probs just pay on the day if I go.

Ill be there in the skevy, will be its last outing as a two speed until my he box gets pulled... Depending on Chris's enthusiasm (as I haven't even asked him yet) I may be rocking some new BC's ;)

Well he never comes to lakeside :P that is nice and dangerous.

I have done lakeside happylaps a few time. Even before they put the cones around the back of the track to slow you down

Righto fitting coilovers to the abomination on Friday night at my place at around 5. Come around if you giys want for beers and bullshit while I fit them. Might even do a feed as well

Righto fitting coilovers to the abomination on Friday night at my place at around 5. Come around if you giys want for beers and bullshit while I fit them. Might even do a feed as well

Goes without saying but, I'm in :)

Will be supplying coronas for Chris and as I believe dalton is driving a six pack for myself, give us a text if you want some snags or anything brought up

In case you boys haven't seen the post http://www.skylinesaustralia.com/forums/topic/423450-an-evening-with-jim-richards-and-fred-gibson-18th-july/

Get onto this. Will be a great night and a great opportunity to meet the mastermind behind the R32 coming to race in Australia, and one of the drivers of these great cars. This is a rare and awesome opportunity to meet both Jim Richards and Fred Gibson. Get on this guys. I have already got the 18th and 19th off work for this and hopefully you guys will make it down also

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • OK, that is a helpful description, because that sounds exactly like a bleeding issue in the clutch....these are hard to bleed manually even when the damping loop has been removed. I'd suggest bleeding again....start by filling the master cylinder up and opening the bleed nipple. Come back and check every now and then that the master cylinder is not empty. Let it gravity bleed for a few hours and see if that improves
    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
×
×
  • Create New...