Jump to content
SAU Community

Recommended Posts

Ok I'll give that a try see if that worjs

I use electrical contact cleaner which is essentially the same thing bar the price. Bunnings have them cheap.

Sad you couldn't turn up today cos of the car. We were wondering where you were.

Had a fun drive today. Even got to swap cars and drove a 350Z. Bloody spectacular cars even stock standard. I personally believe a it would run rings around my 180 on the track apart from the straightaways. I wouldn't be surprised if it was 3 or more seconds a lap quicker with me behind the wheel of both cars (depending on the track layout).

The Perrenti got all the attention from people up at Picnic Point and had a few requests for pictures. Nobody cared bout the 3 Japanese buzzboxes parked right beside it :(

I use electrical contact cleaner which is essentially the same thing bar the price. Bunnings have them cheap.

Sad you couldn't turn up today cos of the car. We were wondering where you were.

Had a fun drive today. Even got to swap cars and drove a 350Z. Bloody spectacular cars even stock standard. I personally believe a it would run rings around my 180 on the track apart from the straightaways. I wouldn't be surprised if it was 3 or more seconds a lap quicker with me behind the wheel of both cars (depending on the track layout).

The Perrenti got all the attention from people up at Picnic Point and had a few requests for pictures. Nobody cared bout the 3 Japanese buzzboxes parked right beside it :(

That's only because I wasn't there ;)

I start mine at service stations and have people walk over saying "excuse me but what is in that".... And I giggle lol

So what's the review of the 350z I've never been on one? I know they sound sexy with an exhaust (much better then the raspy vg30dett's)

I think you would have completed the picture, Nick :)

They are solidly built cars. Drive brilliantly and by the seat of my pants, I believe they have greater mechanical grip in the twisty stuff. Their seats also hug you as good as early GTR buckets (I rate them the same with 33GTR ones) with the addition of power adjustment and heating.

The engine has plenty of torque from the get go and nothing beats an N/A for response. Steering is very direct and the brakes are good but a bit too touchy for my liking. Didn't get to brake too hard in it though so I can't tell how they compare to the setup on the 180.

Suspension was stock and didn't roll too much in the corners. Rode bumps and imperfections brilliantly - this made me hate my coilovers even more!

I really ended up liking the car very much in the brief time that I drove it. My comparison is of course based on my experience driving the old girl and being in a few skylines in my time (not just TSO member cars). I know they're newer so I am comparing apples to oranges :P

Makes me wonder what a turbo'd 350 would be like LOL

If you can squeeze turbos into that crowded as sin engine bay without a masters in "wherethef**kamigoingtoputtheseanomitry" ill sell you my first born child lol... Supercharging though :yes:

You need to take me for a run in the 180 broseph

APS used to make bolt-on turbo kits for the 350. Some 350s for sale here are turbo'd.

The old girl isn't anything special. She makes a great street car - got the brakes and takes corners like a pro but she can get unsettled depending on what sort of bump you hit mid-corner. Coilovers just suck plain and simple. Bilstein shocks and eibach springs all the way IMO.

Today's little session revealed my current alignment setting lacks turn-in compared to my previous setting but I don't have to fight the wheel so much in regular day-to-day commuting. Sad I can't have my cake and eat it.

When you do get a ride, you'll miss the torque of the LS and I thoroughly enjoyed the torque of the VQ. Boost however, can get addictive.

Edited by me_larr

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • OK, that is a helpful description, because that sounds exactly like a bleeding issue in the clutch....these are hard to bleed manually even when the damping loop has been removed. I'd suggest bleeding again....start by filling the master cylinder up and opening the bleed nipple. Come back and check every now and then that the master cylinder is not empty. Let it gravity bleed for a few hours and see if that improves
    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
×
×
  • Create New...