Jump to content
SAU Community

Recommended Posts

hey guys,

Just starting the importing process (still searching). i have read in other threads where people found links on auction sites. but most of those links have now died and i cant read japanese, so i cant figure out how to go back to the main site lol.

i want to browse those sites just incase my broker/agent has missed out on anything that i could be potentially interested in.

anyways, currently looking at a GTR R34 vspec or vspecII(if im lucky), for 50k or under landed and on road.

any help would be appreciated.

cheers

Edited by vspecR
Link to comment
https://www.sau.com.au/forums/topic/361246-auction-sites/
Share on other sites

You can use https://bzl.cis6200.jp/e/ with sign in id - V38095

Doesnt show you auction reports though like on the J-Spec site. Have trust in your broker , if he is any good then he surely wont miss a beat you just have to be patient. Also check http://exchange.goo-net.com/ for fixed price cars.

Edited by TUFF_350
Link to comment
https://www.sau.com.au/forums/topic/361246-auction-sites/#findComment-5766960
Share on other sites

^^^no auction report sheets, BUT you DO generally get a much bigger warning of cars using the legit USS browser...

ie: you'll know about an auction that is on wednesday.. and see the car come up on the sunday before - whereas Jspec you see it on the tuesday arvo :P

...down side of the USS site is that if you find the car you want - you end up walking around for three days with a boner anxious over whether or not you are bidding enough :P

Link to comment
https://www.sau.com.au/forums/topic/361246-auction-sites/#findComment-5767106
Share on other sites

my personal opinion

:)

i like to browse import monster for his ability to view yahoo japan

and i tend to use www.japaneseusedcars.com these days

because you get a fairly vast and varied view of auction houses, also the cars are listed in year built order so you're not jumping from 1989,2004,2002, 1994, etc etc

plus japaneseusedcars have put their dealer view back up again finally :P

the reason you've only been shown two cars will probably be because your broker only VISITs one auction house a day - they're not going to go to kansai to inspect a car for you if they're in tokyo on that day unless you tell them its super duper important that they send an auction runner on a train out there to view your car... (for example)

for instance:

check this out

Link to comment
https://www.sau.com.au/forums/topic/361246-auction-sites/#findComment-5767237
Share on other sites

lol i was wondering why that was so cheap. def considering it IF it was a real GTR

lol im pretty sure the ones i have seen, the inspector never went and saw it because i wasnt interested in neither

thanks for the links, im gonna burn some time at work lol

Link to comment
https://www.sau.com.au/forums/topic/361246-auction-sites/#findComment-5767338
Share on other sites

^^^no auction report sheets, BUT you DO generally get a much bigger warning of cars using the legit USS browser...

ie: you'll know about an auction that is on wednesday.. and see the car come up on the sunday before - whereas Jspec you see it on the tuesday arvo :P

...down side of the USS site is that if you find the car you want - you end up walking around for three days with a boner anxious over whether or not you are bidding enough :P

Haha anxious boner, thats funny as!

Link to comment
https://www.sau.com.au/forums/topic/361246-auction-sites/#findComment-5767371
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Add to this... What blew the fuse too? If a circuit feeding power to the coils was blown, how were the coils even functioning to let the car start?   There is some seriously wrong wiring in that car for certain, and I'm betting there is some melted cables somewhere, but I can't explain the 30v either, unless there is something back feeding on that power line that has a dodgy power system and the electronics are giving it hell.
    • This is typically the case with such threads. What I cannot quite get my head around is where a reading above 12V (or 13.8 or 14.x or whatever the maximum achievable voltage might actually be in that specific car) comes from. 25V or 30V should be completely impossible. There's no way to create it. Hard to answer that question. It will literally depend on whether the current tune relies on the values as set. I'd guess it probably does. ie, the real base pressure being 49 means that the flowrate through the injectors will be higher than if it was 43.5. The Haltech's modelling should be handling that, but because it thinks the pressure is only 43.5, then..... I dunno. It should be thinking that it will be injecting less fuel with each pulse duration than is actually happening. So, something is definitely not-as-it-should-be, but specifically what that is is beyond my abilities to imagine. Someone like Dose who spends more time with Haltechs might have a better thought.
    • Bit of a late reply here as me and my wife have been really busy with new born twins. I finally got these issues fixed and it was something really stupid that caused all of this 🤦‍♂️... After alot of mucking around with trying to figure out what is causing these issues, I back probed one of the R35 coils on the power 12v supply, with the engine running it got 25v! And I thought, hang on..., this isn't normal. Measured my battery with the engine running to check for over charge from the alternator and it wasn't that. So then I dissconnected the R35 PRP coil harness and backprobed the power supply on the engine loom where the ignition coil harness connects, with the key on ignition (engine off) it measured 30v! So then I had to trace where that high voltage was coming from and it lead me to the brown relay "ECM & IGN coil relay" inside the cabin next to the ECU on the passanger wall. This relay feeds power to the ECM and ignition coils. Tried swapping it with another same relay. nah still 30v.. coming from the 2 green/white wires in the brown relay. So then I set my multi meter to the beep continuity mode and probed every fuse on the fuse box inside the cabin to try and find this high voltage power source. Wasn't any of the fuses inside the cabin. Then probed all the fuses in the engine bay and BAM, got my power source that was a 10AMP fuse called "ENG CONT". Pulled the fuse out, and what do you know... it was blown. 🤦‍♂️  So then I quickly replaced it with a new 10AMP fuse, started the car and yeah haha [insert extreme face palm]... The RPM blimping thing went away, car idles smoothly now like what it was before. I swear! I checked all my fuses with my test light twice before I created this forum thread. I think, maybe because one side of that faulty 10A fuse lit up on my test light, I must have thought it was still ok and not blown. But now I know to have both sides light up on the test light when checking fuses... I hate diagnosing electricals.... I'd take mechanical problems over electrical problems any day🤣. Drove the car around my suburb with the engine up to operating temp and it runs fine like before. However, I notice that my fuel pressure is still at 49psi. So I'm thinking this must be normal for my system as I've upgraded the stock fuel pump to a Walbro 255L/h with a constant 12v mod.  But anyway, I'm just glad to have my daily back on the road! Thanks everyone for the replies on this thread, all sorted now! One thing I want to ask you tuner guys, my base fuel pressure on the haltech main settings are set to 43.5psi from default (my tuner must have not checked the fuel pressure maybe when tuning my car?). Do I set it to what it actually is idling on at 49psi? Or just leave it ("if it aint broke, don't fix it/leave it")?  
    • The max they would go for me is 50.
    • That cannot have been a fun set of drilling. The stock "baffle" looks identical to rb26, I just cut fuel cell foam to fit the full length under the baffle.
×
×
  • Create New...